DES PRODUITS
SMC320-SXX
Télécharger
Les paramètres de série suivants sont fournis à titre indicatif uniquement. Les paramètres techniques détaillés font l'objet de spécifications techniques.
| Module produit | Puissance(W) | Vin(VAC) | Vout(VDC) | Nb de sortie | Isolement (VAC) | Forfait | Dimensions(mm) | Rapport d'essai |
| SMC320-S05 | 320 | 90~264 | 5 | 1 | 3000 | Wiring | 215*115*30 | |
| SMC320-S12 | 320 | 90~264 | 12 | 1 | 3000 | Wiring | 215*115*30 | |
| SMC320-S15 | 320 | 90~264 | 15 | 1 | 3000 | Wiring | 215*115*30 | |
| SMC320-S24 | 320 | 90~264 | 24 | 1 | 3000 | Wiring | 215*115*30 | |
| SMC320-S36 | 320 | 90~264 | 36 | 1 | 3000 | Wiring | 215*115*30 | |
| SMC320-48 | 320 | 90~264 | 48 | 1 | 3000 | Wiring | 215*115*30 |
PFC Series Advantages
1. High Efficiency
One of the most significant advantages of the PFC Series is its high efficiency. The PFC Series features a high efficiency rate of up to 98%, which helps to reduce energy costs and improve the overall efficiency of the system. This makes the PFC Series an ideal choice for applications where energy efficiency is a critical concern, such as in industrial automation and telecommunications. The high efficiency of the PFC Series is achieved through the use of advanced power electronics and control algorithms that ensure the power supply is always operating at its maximum efficiency.
2. Improved Power Factor
Another significant advantage of the PFC Series is its ability to improve the power factor of the system. The power factor is a critical factor in power supply design as it measures the efficiency of the power supply in delivering power to the load. A low power factor can result in increased energy costs, reduced efficiency, and increased system downtime. The PFC Series is designed to provide efficient and reliable PFC solutions that help to reduce the harmonic distortion in the system and improve the overall power factor of the system. This helps to reduce energy costs and improve the overall efficiency of the system.
3. High Reliability
The PFC Series is designed for high reliability, which is critical in applications where system downtime and failures are not an option. The PFC Series features a rugged and robust design that is capable of withstanding harsh environmental conditions, including high temperatures, humidity, and shock. It also features comprehensive protection mechanisms, including over-voltage protection, over-current protection, and short-circuit protection, which helps to ensure the safe and reliable operation of the system. The PFC Series is designed to operate 24/7 without any issues, making it an ideal choice for critical systems in industries such as industrial automation, telecommunications, and medical equipment.
4. Easy Integration
The PFC Series is also designed for easy integration into existing systems and applications. It features a compact design that makes it easy to integrate into existing systems with limited space. It also features a user-friendly interface that simplifies the installation and operation process, making it an ideal choice for applications with limited technical expertise. The PFC Series also comes with a range of accessories and connectors that make it easy to connect and use with existing systems.
5. Versatility
The PFC Series is available in a range of power levels, making it a versatile and flexible solution for different applications. It is available in both single-phase and three-phase versions, and its power range goes from 250W to 5kW. This makes the PFC Series an ideal choice for various applications in different industries, including industrial automation, telecommunications, medical equipment, and consumer electronics.
Précédent: Série PFC (250 ~ 350 W)
Prochain: SMC250-SXX
les informations pertinentes
-
2023-5-21
Efficient 12V AC to DC Converter for LED Lighting Applications
LED lighting has become increasingly popular due to its energy efficiency, long lifespan, and low heat emission. However, most LED lighting systems require a DC power source, while the majority of homes and buildings have AC power sources. Therefore, an efficient AC to DC converter is needed to power the LED lighting system. In this article, we will discuss the design and implementation of an efficient 12V AC to DC converter suitable for LED lighting applications. The converter is based on a bridge rectifier, a smoothing capacitor, and a voltage regulator. Bridge Rectifier The first stage of the converter is the bridge rectifier. The bridge rectifier is a diode-based circuit that converts the AC voltage to a pulsating DC voltage....
Voir les détails -
2023-4-15
Generating Direct Current: The AC-DC Converter
Direct current (DC) is a type of electrical current that flows in only one direction. It is widely used in electronics, power supplies, and many other applications. However, most of our electrical power grid is alternating current (AC), which means that the electrical current periodically changes direction. Therefore, to use AC power in DC devices, we need an AC-DC converter to convert the AC power into DC power. In this article, we will discuss how an AC-DC converter works. Firstly, let understand the difference between AC and DC power. AC power alternates between positive and negative voltage cycles, and it flows in a sine wave pattern. On the other hand, DC power flows in a straight line, and it has...
Voir les détails -
2023-6-12
Bidirectional DC-DC Converter: Efficient Power Conversion in Both Directions
The need for efficient power conversion is becoming increasingly important in today's world. As the demand for energy continues to grow, it is essential to find ways to optimize power conversion in various systems. One such system that requires efficient power conversion is the bidirectional DC-DC converter. The bidirectional DC-DC converter is a type of power converter that can transfer energy in both directions. This means that it can convert DC voltage from a source to a load, and also from a load to a source. This bidirectional functionality is particularly useful in applications where energy needs to be transferred back and forth between two sources, such as in hybrid electric vehicles and renewable energy systems. The efficiency of power...
Voir les détails -
2023-10-7
Fully Modular 650W Power Supply: The Ultimate Solution for Your Power Needs
Reliable power supply is crucial for the smooth functioning of our electronic devices. Whether it is for gaming, video editing, or running a home office, having a dependable power source is essential. This is where the Fully Modular 650W Power Supply comes into play. With its advanced features and cutting-edge technology, it is the ultimate solution for all your power needs. The Fully Modular 650W Power Supply is designed to provide high-quality power to your devices while ensuring efficiency and stability. Its fully modular design means that you can easily connect and disconnect cables as per your requirements, reducing clutter and improving airflow within your system. This not only enhances the overall aesthetics of your setup but also allows for...
Voir les détails -
2023-5-26
DC Power Conversion: Understanding the Basics and Applications
Direct current (DC) power conversion is an essential process in our modern world. It involves the transformation of electrical energy from one form to another. DC power conversion is widely used in various areas, from household appliances to industrial automation, and from renewable energy generation to electric vehicles. In this article, we will discuss the basics of DC power conversion and its applications. DC Power Conversion Basics DC power conversion involves three main components: input source, conversion circuit, and output load. The input source can be an AC power source, a battery, or a renewable energy source like solar or wind. The conversion circuit is responsible for converting the input power to the desired output power. It consists of voltage...
Voir les détails -
2023-11-12
Fully Modular Power Supply: The Ultimate Solution for Efficient Cable Management
Efficiency is the key to success. This is especially true when it comes to managing the countless cables that power our electronic devices. Cable management can be a daunting task, but thanks to the advent of fully modular power supplies, it has become easier than ever before. A fully modular power supply is a type of power supply unit (PSU) that allows users to detach and attach cables as needed. Unlike semi-modular or non-modular PSUs, where some cables are permanently attached, a fully modular power supply gives users complete control over which cables are connected to their system. This offers a multitude of benefits, with efficient cable management being the most significant one. One of the main advantages of a...
Voir les détails