Вести
Како да изберете фабрика за DC-DC конвертор, како да изберете висококвалитетен DC-DC конвертор
Автор: ZYG Power Module Time： 2022-9-16
What is a DC-DC converter?
A DC-DC converter, also known as a DC-DC converter or DC transformer, is a circuit or electromechanical device that converts electrical energy. It can convert direct current (DC) power to DC power (or approximate DC) of different voltages. Its power ranges from very low (small batteries) to very high (high voltage power transfer). The output voltage of some DC-DC converters has the same reference point as the input voltage, while the output voltage of some DC-DC converters is isolated from the input voltage.
DC-DC Converter Inductor Selection
The process of selecting an inductor for a DC-DC converter depends on many parameters. Depending on the power levels involved, these inductors can be quite large and may need to be designed for your system. In addition to the required area, the following specifications are also important. You need to consider the choice of DC-DC converter electrical sensors:
Rated current and coil resistance. The coil itself will have some DC resistance, which will generate heat and reduce some voltage across the inductance. Coil resistance should be as low as possible to prevent power loss. Also, the current rating will depend on the physical size of the inductor package; winding sensors are used for high power converters, while foil electric motors can be used for low power converters.
saturation current. Ferrite sensors will have some saturation current, which will saturate the core than saturation current sensors. This will cause the next switching cycle to lag. The inductor should be chosen so that the saturation current is greater than the maximum current required by the system.
inductance and frequency. All components have parasitic effects. Parasitic capacitances between windings and coil resistances can cause the system to self-resonate. In fact, the self-resonant frequency of the inductor is usually very high, so it doesn’t matter unless you intend to use a PWM signal with a very fast edge rate and a frequency around MHz.
DC DC Converter Inductor Selection and Inductor Type
Finally, and least important is the inductance value. The required inductor value depends on the topology you use, as this will determine the function the DC-DC converter needs to perform.
релевантни информации
-
2023-11-12
Exploring the Advantages of a Modular PC Power Supply
In the world of computer hardware, power supply units (PSUs) are an essential component that often goes overlooked. However, choosing the right PSU can have a significant impact on the performance and longevity of your computer. One option that has gained popularity in recent years is the modular power supply. In this article, we will explore the advantages of a modular PC power supply and why it might be the right choice for your next build. To understand the advantages of a modular power supply, it is important to first understand the difference between modular and non-modular PSUs. Traditional non-modular power supplies come with a fixed set of cables that are permanently attached to the unit. This means that all...
Погледнете детали -
2023-12-21
DC DC Power Supply Module: An Essential Component for Efficient Power Conversion
In today's technology-driven world, the demand for efficient power conversion is increasing rapidly. From portable electronic devices to electric vehicles, the need for reliable and compact power supply modules is crucial. One such significant component that plays a vital role in power conversion is the DC DC power supply module. In this article, we will dive deeper into the workings, applications, and benefits of this essential module. What is a DC DC Power Supply Module? A DC DC power supply module is an electronic device that converts one level of DC voltage to another level of DC voltage. It takes in a direct current (DC) input from a power source and delivers a regulated output voltage suitable for a specific...
Погледнете детали -
2023-4-13
AC-DC Converter: Making the Switch from Alternating to Direct Current
AC-DC converters, also known as rectifiers, are electronic devices that convert alternating current (AC) to direct current (DC). This is important because most electronic devices, such as computers and televisions, require DC in order to operate. AC-DC converters are used extensively in power supply applications and are a common component in many electronic devices. The process of AC-DC conversion begins with the rectification of the AC signal. Rectification is the process of converting the AC signal into a DC signal by removing the negative portion of the waveform. This is done using a rectifier diode, which allows current to flow in only one direction. The result is a pulsating DC signal that has a voltage equal to the peak value...
Погледнете детали -
2023-2-13
Small Size Power Module Suppliers： Choosing the Right One for Your Application
Small size power modules are becoming more and more popular due to their low cost and small size. There are many suppliers of these modules, so it can be difficult to choose the right one for your application. In this blog post, we will discuss some factors to consider when choosing a small size power module supplier. - What are small size power modules? Small size power modules are a type of power module that has a small size. They are often used in portable devices such as cell phones and laptop computers. Small size power modules are usually less expensive and have a shorter lead time than other types of power modules. - Advantages of using small size power...
Погледнете детали -
2023-4-23
Distinguishing Between AC and DC Power Supplies
AC and DC power supplies are two types of electrical power sources commonly used in various applications. AC stands for alternating current, while DC stands for direct current. The main difference between the two is the direction of the flow of electrons through the circuit. In this article, we will discuss the differences between AC and DC power supplies in terms of their characteristics, applications, and advantages. Characteristics of AC Power Supplies: AC power supplies provide electrical power that changes direction periodically. The voltage and current in an AC circuit oscillate sinusoidally, which means that they change direction and magnitude constantly. The frequency of this oscillation is measured in Hertz (Hz) and is typically 50 or 60 Hz in most...
Погледнете детали -
2023-4-24
Како да изградите AC-DC напојување
Introduction An AC-DC power supply is an essential component in many electronic devices, providing a constant and reliable source of power. These power supplies can be used in a wide range of applications, from powering small electronic devices like smartphones to larger appliances like refrigerators and air conditioners. Building one of these devices is a relatively simple process, and can be done with some basic knowledge of electronics and a few common components. Step 1: Choose the Transformer The first step in building an AC-DC power supply is to choose an appropriate transformer. The transformer will convert the AC voltage from the wall outlet into a lower voltage that can be used by the power supply. The voltage needed will...
Погледнете детали