Вести
Building a 120V AC to 3V DC Power Supply
Автор: ZYG Power Module Time： 2023-4-18
Introduction:
A power supply is an essential component in any electrical or electronic system. It provides the necessary power for the system to operate. In this article, we will discuss how to build a 120V AC to 3V DC power supply. The power supply can be used for a variety of applications such as powering low voltage circuits, charging batteries, and powering small electronic devices.
Design:
The power supply is designed to convert the 120V AC voltage from the mains into a 3V DC voltage. The power supply consists of a transformer, a bridge rectifier, and a voltage regulator.
Transformer:
The transformer is used to step down the 120V AC voltage to a lower voltage suitable for the power supply. The transformer used in this design has a primary winding of 120V AC and a secondary winding of 6V AC. The secondary winding is center-tapped, which means that it has a common ground reference.
Bridge Rectifier:
The bridge rectifier is used to convert the AC voltage from the transformer into a DC voltage. The bridge rectifier is made up of four diodes that are arranged in a bridge configuration. The output of the bridge rectifier is a pulsating DC voltage that has a voltage of approximately 9V DC.
Voltage Regulator:
The voltage regulator is used to regulate the output voltage of the power supply. In this design, a LM317 voltage regulator is used. The LM317 voltage regulator is a three-terminal adjustable voltage regulator that can provide an output voltage between 1.25V and 37V. The LM317 voltage regulator is connected in a voltage divider configuration to provide a 3V DC output voltage.
Circuit Diagram:
The following circuit diagram shows the 120V AC to 3V DC power supply:
[Insert Circuit Diagram Here]
Construction:
The 120V AC to 3V DC power supply can be easily constructed on a breadboard or a PCB. The components required for the power supply are:
1. Transformer: 120V AC to 6V AC center-tapped transformer
2. Bridge Rectifier: 4x 1N4007 diodes
3. Voltage Regulator: LM317
4. Capacitors: 1x 2200uF electrolytic capacitor, 1x 0.1uF ceramic capacitor
5. Resistors: 2x 220 ohm resistors, 1x 240 ohm resistor
6. LED: 1x LED (optional)
The following steps can be followed to construct the power supply:
1. Mount the components on a breadboard or a PCB as shown in the circuit diagram.
2. Connect the 120V AC input to the primary winding of the transformer.
3. Connect the center-tap of the secondary winding of the transformer to the ground.
4. Connect the output of the bridge rectifier to the input of the LM317 voltage regulator.
5. Connect the output of the LM317 voltage regulator to the output terminals.
6. Connect the LED (optional) to the output terminals through a current-limiting resistor.
Testing:
The power supply can be tested by measuring the output voltage using a multimeter. The output voltage should be approximately 3V DC. The LED (optional) can also be connected to the output terminals to test the power supply.
Conclusion:
In this article, we have discussed how to build a 120V AC to 3V DC power supply. The power supply is designed using a transformer, a bridge rectifier, and a voltage regulator. The power supply can be used for a variety of applications such as powering low voltage circuits, charging batteries, and powering small electronic devices. The power supply is easy to construct and can be tested using a multimeter.
Претходно: AC-DC конвертор: Конвертирање на наизменична струја во директна струја
Следно: како да се поврзете напојување од наизменична струја во еднонасочна струја
релевантни информации
-
2023-6-5
AC to DC Converter 12V 15 Amp: Efficient Power Supply Solution
In today's world, electronic devices and appliances have become an integral part of our lives. From mobile phones to laptops, and from televisions to air conditioners, we use a wide range of gadgets that require a constant and reliable power supply. AC to DC converters play a vital role in delivering the required power to these devices. In this article, we will discuss the AC to DC converter 12V 15 Amp, and how it serves as an efficient power supply solution. An AC to DC converter is an electronic device that converts an alternating current (AC) input voltage into a direct current (DC) output voltage. The DC voltage is then used to power various electrical and electronic devices. The AC...
Погледнете детали -
2023-6-18
Unlocking the Power of LEDs: A Comprehensive Guide to the LED Power Series
LEDs, or light-emitting diodes, have revolutionized the way we illuminate our world. With their energy efficiency, long lifespan, and versatility, LEDs have become the go-to choice for lighting in homes, businesses, and public spaces. However, not all LEDs are created equal. The brightness, color temperature, and overall performance of an LED light depend largely on the power source used to drive it. That's where the LED Power Series comes in – a comprehensive guide to the different types of LED power sources and how they can be optimized for maximum performance. What is the LED Power Series? The LED Power Series is a collection of power sources specifically designed for use with LED lights. These power sources are available in...
Погледнете детали -
2023-7-18
The demand for efficient and reliable power conversion solutions has never been greater. In today's fast-paced world, where technology plays a crucial role in our daily lives, it is essential to have power converters that can keep up with the increasing power demands of electronic devices. That's where the SP Series AC DC Converter comes in. The SP Series AC DC Converter is a cutting-edge power conversion solution that offers the perfect balance of efficiency and reliability. Designed with the latest technological advancements, this converter is capable of delivering high-quality power with minimal energy loss, making it an ideal choice for a wide range of applications. One of the standout features of the SP Series AC DC Converter is its...
Погледнете детали -
2023-4-21
Building a 120 Volt AC Power Supply for 3 Volts DC
In this guide, we will be building a 120-volt AC power supply that can provide 3 volts DC output. This power supply will be useful for a variety of electronic projects that require a low voltage DC power source. To begin, we will need the following materials: - Transformer: A transformer is a device that converts high voltage AC power to low voltage AC power. In this case, we will need a transformer that can convert 120V AC to 6V AC. - Bridge rectifier: A bridge rectifier is a circuit that converts AC power to DC power. We will be using a bridge rectifier that can handle at least 1 ampere of current. - Capacitor: A capacitor is an electronic...
Погледнете детали -
2023-11-23
Ultimate Efficiency and Customization: Unleash the Power with a 1000W Modular Power Supply
In the world of technology, power is everything. Whether it's powering our smartphones, laptops, or even our entire computer systems, we rely on a steady and efficient source of power to keep us connected and productive. This is where a high-quality power supply comes into play. Introducing the 1000W Modular Power Supply, a powerhouse of energy that is designed to meet the demands of even the most power-hungry systems. With its unrivaled efficiency and customizable features, it is the ultimate choice for hardcore gamers, professional designers, and all technology enthusiasts alike. Efficiency is the key to any power supply, and the 1000W Modular Power Supply delivers it in abundance. With an impressive 80 Plus Platinum certification, it boasts an efficiency...
Погледнете детали -
2023-6-12
HP Series AC DC Converter: High-Performance Power Conversion Solution
The HP Series AC DC Converter is a high-performance power conversion solution designed for a variety of industrial applications. This innovative product is manufactured by a leading company in the power electronics industry and is a testament to their commitment to providing reliable and efficient solutions for their customers. One of the standout features of the HP Series AC DC Converter is its high efficiency. With a conversion efficiency of up to 96%, this product is highly efficient and can save users a significant amount of energy and money over time. This is particularly important in industrial settings where energy costs can be a major expense. Another key feature of the HP Series AC DC Converter is its wide input...
Погледнете детали