Вести
За важноста, структурата и како да го изберете модулот за напојување DC-DC?
Автор: ZYG Power Module Time： 2022-4-7
With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.
The importance of DC-DC power module:
DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.
For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.
Power structure of DC-DC power module:
The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.
The selection of power modules should be based on the following four points:
1, the use of mature power supply topology
The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.
2, high efficiency within the full load range
High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.
3, limit temperature characteristics
The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.
4, high isolation, low isolation capacitance
Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.
релевантни информации
-
2023-5-29
DC DC Converter DP Series: A Reliable Solution for Efficient Power Conversion
DC DC converters are an essential component in electronic systems that require efficient power conversion from one voltage level to another. The DP series DC DC converter is a reliable solution for this purpose, designed to provide high efficiency and reliability in various applications. The DP series DC DC converter is a step-down converter that allows for the conversion of high voltage DC input to a lower voltage DC output. These converters are typically used in battery-powered devices such as smartphones, cameras, and portable electronic devices. They are also used in automotive, industrial, and aerospace applications where the input voltage can be higher than the output voltage. One of the key benefits of the DP series converter is its efficiency....
Погледнете детали -
2023-6-14
Power supply is an indispensable part in electronic devices. It provides the necessary power to run the device and is responsible for its proper functioning. In recent years, with the development of technology, the demand for power supplies has increased and manufacturers are constantly striving to provide more efficient and reliable power supplies. One such power supply that has gained popularity in the market is the DM Series DC DC Power Supply. The DM Series DC DC Power Supply is a high-performance power supply designed to meet the demands of today's electronic devices. It is widely used in various fields, such as telecommunications, medical equipment, military, aerospace, and industrial automation. The DM Series power supply is designed to provide stable...
Погледнете детали -
2023-6-22
SM Series AC DC Power Supply: Reliable and Efficient Solution for Your Power Needs
In today's era of technology, power supply plays a crucial role in the smooth functioning of any electronic device. Be it a simple handheld device or an industrial machine, the power supply should be reliable, efficient, and safe. The SM series AC DC power supply is one such solution that has been designed to cater to the power needs of various applications. The SM series AC DC power supply is manufactured by a renowned company that specializes in power electronics solutions. This power supply is designed to provide a stable and reliable source of power to devices in various applications. It has a wide input voltage range which makes it suitable for use in different countries and regions. The output...
Погледнете детали -
2023-5-2
Designing an AC-DC Converter Circuit
Introduction AC-DC converters are electronic circuits used to convert an AC voltage to a DC voltage. These circuits are used in a wide range of devices, including power supplies for electronic equipment, battery chargers, and LED drivers. In this article, we will discuss the design of an AC-DC converter circuit. Design Considerations The design of an AC-DC converter circuit involves several considerations, including the input voltage, output voltage, output current, and efficiency. The input voltage is the AC voltage that is to be converted to DC. The output voltage is the DC voltage required for the load. The output current is the current that the load requires. The efficiency is the ratio of the output power to the input power....
Погледнете детали -
2023-4-16
Генерирање DC напојување: Разбирање на AC-DC конвертори
In today world, electricity is a crucial part of our daily lives. Everything from our homes to our workplaces to our smartphones is powered by electricity. But not all devices are powered by the same type of electricity. Some devices require direct current (DC) power, while others require alternating current (AC) power. AC power is the type of electricity that is delivered to most homes and businesses. It is called alternating current because it switches direction many times per second, typically 60 times in the United States. In contrast, DC power flows in one direction only. AC-DC converters are devices that transform AC power into DC power. They are used in a wide range of applications, from powering electronic devices...
Погледнете детали -
2023-4-12
Transforming AC to DC: The AC-DC Converter
Transforming AC to DC: The AC-DC Converter The world we live in is powered by electricity, and it is essential to have a steady and reliable supply of electrical power. However, the power that we get from the power grid is alternating current (AC), whereas most of the electronic devices that we use require direct current (DC). Therefore, we need a way to convert AC power to DC power, and this is where the AC-DC converter comes in. An AC-DC converter, also known as a rectifier, is a device that converts alternating current (AC) to direct current (DC). The process of converting AC to DC involves two stages: rectification and smoothing. Rectification is the process of converting the AC voltage...
Погледнете детали