خبریں
AC-DC پاور سپلائی بنانے والے کا انتخاب کب کریں اور AC-DC پاور سپلائی کو منتخب کرنے کے کیا فوائد ہیں
مصنف: زیڈ وائی جی پاور ماڈیول Time： 2022-9-14
AC DC Power Module Filling Requirements
Potting and sealing of AC DC power modules is very important. This process involves not only the protection of AC and DC power modules (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also the thermal design of AC and DC power modules.
Power module potting materials are generally divided into three categories: epoxy resin, polyurethane, and silicone rubber
Due to the hardness of epoxy resin, it cannot be used for stress-sensitive and module packaging and SMT components, so it is basically eliminated in module power supplies. But epoxy resins are also used in cost-critical micropower power supplies due to their low cost. Some domestic bad power supply manufacturers also use this epoxy resin for AC and DC power supply modules, but due to stress problems, the failure rate of this power supply is very high, and buyers are very distressed.
At present, most of the power modules are sealed with molded silicone. For the convenience of operation, the ratio of 1:1 is usually adopted. When designing for AC and DC power modules, attention should be paid to their thermal conductivity. However, the adhesion is not very strong, so a substrate coating can be used to improve sealing.
Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price of silicone rubber, polyurethane is not cost-effective. There is basically no domestic application of it.
Special attention should be paid to thermal conductivity in relation to thermal design. Generally speaking, a thermal conductivity of 0.5w/M·K is defined as high thermal conductivity, and a thermal conductivity greater than 1 is defined as very high thermal conductivity.
The power module is such a highly integrated small and medium-sized switching power supply. In recent years, with the development trend of high and new technology, it has been widely used in industrial electrical, power supply system, instrumentation, urban rail, intelligent security, new energy technology, communication, automation technology and intelligent system industry.
Make sure to type the source type first
The power module can input AC current or AC current. Normally, the FH/DC power module selects AC current input, and the DC/DC power module selects AC input. The high-cubic FH-DC power module can also be used normally under the DC input working voltage standard.
Type in the operating voltage category to select
After confirming the input source, the input working voltage can refer to the manufacturer’s motor selection structure. The communication keys are basically 120V, 230V, 220V. Now FH/DC power modules usually consider 86~265VAC or 150~370VDC types, and 220V also consider 230V types, but the probability of application at 230V will be much worse, and the DC keys are basically 5V~76V.
Select the package type of the item
Product package types include single in-line SIP package, small and medium vertical bare board, dual in-line ultra-small DIP package and rail package. The bare board is composed of a PCB circuit board and various components. It is completely exposed and not very safe, but the cost is low.
DIP packaging is usually strongly recommended. Although it is expensive to lose, it has the characteristics of potting packaging, safety protection, good heat dissipation characteristics of heat pipes, anti-freezing, moisture-proof and stable characteristics. must be selected on a case-by-case basis.
Select the output power of the goods according to the load size
When selecting the output power of the power module, it is usually strongly recommended to reserve the capacity, and the output power of the application is between 30 and 90% of the actual output power. The capacity is large and there are noise problems when working at high frequencies.
پچھلا: اپنی چائنا AC-DC پاور سپلائی کو اپنی مخصوص ضروریات کے مطابق کیسے بنائیں
اگلے: DC-DC کنورٹر فیکٹری کا انتخاب کیسے کریں، اعلیٰ معیار کے DC-DC کنورٹر کا انتخاب کیسے کریں۔
متعلقہ معلومات
-
2023-7-6
120V AC to 12V DC Converter: Efficient Power Conversion for Electronics
Introduction: In the world of electronics, power conversion plays a crucial role in ensuring the smooth functioning of various devices. One such essential conversion is from 120V alternating current (AC) to 12V direct current (DC). This article aims to explore the significance of a 120V AC to 12V DC converter, its working principle, and its application in efficiently powering a wide range of electronic devices. Understanding the Need for a 120V AC to 12V DC Converter: Most electronic appliances and devices, such as smartphones, laptops, LED lights, and car audio systems, operate on low voltage DC power. However, the power supplied to our homes and businesses is typically high voltage AC power. Hence, a conversion is necessary to ensure compatibility...
تفصیلات دیکھیں -
2023-7-15
Bidirectional DC-DC Converter: Enhancing Power Flow Flexibility in Energy Systems
Title: Bidirectional DC-DC Converter: Enhancing Power Flow Flexibility in Energy SystemsIntroductionIn recent years, the growing demand for renewable energy sources and the increasing integration of distributed energy resources in power systems have posed significant challenges in managing power flow and ensuring grid stability. Bidirectional DC-DC converters have emerged as a promising solution to address these challenges by enhancing power flow flexibility in energy systems. This article explores the functionalities and benefits of bidirectional DC-DC converters, shedding light on their potential to revolutionize the energy landscape.1. Understanding Bidirectional DC-DC ConvertersA bidirectional DC-DC converter is an electronic device that facilitates the transfer of power between two DC voltage sources with varying voltage levels. It serves as a crucial interface between different energy...
تفصیلات دیکھیں -
2023-11-9
Top Quality 1000W Modular Power Supply for High-Powered Devices
The importance of a reliable power supply cannot be overstated when it comes to high-powered devices. Whether you are a gamer, a computer enthusiast, or a professional in a demanding industry, having a top-quality 1000W modular power supply is essential for ensuring optimal performance and stability. A modular power supply is a type of power supply unit (PSU) that allows users to customize and manage their cable configuration. This flexibility is particularly valuable when dealing with high-powered devices, as it minimizes cable clutter and improves airflow within your system. By only using the cables you need, you can enhance the overall efficiency of your power supply. When it comes to high-powered devices, such as gaming PCs or workstations, a 1000W...
تفصیلات دیکھیں -
2023-10-16
Unleash the Power: Discover the Best Fully Modular Power Supply
In the world of technology, power is everything. Whether you are a gamer, a content creator, or simply a tech enthusiast, having a reliable and efficient power supply is crucial for your system's performance and overall experience. One power supply that stands out from the rest is the fully modular power supply. With its advanced features and flexibility, it is truly a game-changer. A fully modular power supply is designed to provide maximum customization and convenience. Unlike traditional power supplies, where all the cables are permanently attached, the fully modular power supply allows you to connect only the cables you need. This means you can eliminate unnecessary clutter and optimize airflow within your system, resulting in better cooling and improved...
تفصیلات دیکھیں -
2023-10-17
Understanding the Concept of Modular Power Supply: A Comprehensive Definition
Introduction In the world of computer hardware, one term that often pops up is modular power supply. However, many people are not familiar with what it actually means and how it can benefit them. In this article, we will provide a comprehensive definition of modular power supply and explain its significance in modern computing systems. By the end of this article, readers will have a clear understanding of the concept and its advantages. Definition of Modular Power Supply Modular power supply refers to a type of power supply unit (PSU) designed for computer systems, where the cables that connect the PSU to the various components can be detached and reattached as needed. Unlike non-modular PSUs, which have fixed cables, modular...
تفصیلات دیکھیں -
2022-5-5
چین کے چھوٹے سائز کے پاور ماڈیول مینوفیکچررز کا تعارف
جب ہم پاور ماڈیول کا انتخاب کرتے ہیں، تو ہم عام طور پر ان پٹ، آؤٹ پٹ، ریپل، بریک ڈاؤن، درجہ حرارت، سرٹیفیکیشن، اور پاور سپلائی کی دیگر خصوصیات کے معیار کو دیکھتے ہیں۔ ان کے علاوہ ہم درج ذیل نکات کے مطابق بھی فیصلہ کر سکتے ہیں۔ 1. سرکٹ کا اصول اور سولڈرنگ کا عمل برہنہ بورڈ بدیہی طریقے استعمال کر سکتا ہے، جیسے اجزاء کی صاف ترتیب اور پوٹنگ ماڈیولز کو بے نقاب کیے بغیر اور اندرونی صورت حال کو دیکھنے کے قابل نہیں۔ میکانائزڈ ویو سولڈرنگ کے عمل کا معیار دستی سولڈرنگ سے بہتر ہے، فراخ، لیکن حفاظت اور کارکردگی کے لحاظ سے بہتر ہے 2. چپ کے اجزاء اور ٹرانسفارمر کے اجزاء کی پاور سپلائی کا بنیادی حصہ IC ہے، جو براہ راست بجلی کو متاثر کرے گا۔ درجہ حرارت کی مزاحمت...
تفصیلات دیکھیں