วิธีการเลือกการกวาดล้างคุณภาพและผู้ผลิตโมดูลพลังงานที่เชื่อถือได้?
บ้าน - บล็อก - ข่าวบริษัท - วิธีเลือกโรงงาน DC-DC Converter วิธีเลือก DC-DC Converter คุณภาพสูง

วิธีเลือกโรงงาน DC-DC Converter วิธีเลือก DC-DC Converter คุณภาพสูง

Author: ZYG Power Module Time: 2022-9-16

What is a DC-DC converter?
A DC-DC converter, also known as a DC-DC converter or DC transformer, is a circuit or electromechanical device that converts electrical energy. It can convert direct current (DC) power to DC power (or approximate DC) of different voltages. Its power ranges from very low (small batteries) to very high (high voltage power transfer). The output voltage of some DC-DC converters has the same reference point as the input voltage, while the output voltage of some DC-DC converters is isolated from the input voltage.

 

 

DC-DC Converter Inductor Selection

The process of selecting an inductor for a DC-DC converter depends on many parameters. Depending on the power levels involved, these inductors can be quite large and may need to be designed for your system. In addition to the required area, the following specifications are also important. You need to consider the choice of DC-DC converter electrical sensors:

Rated current and coil resistance. The coil itself will have some DC resistance, which will generate heat and reduce some voltage across the inductance. Coil resistance should be as low as possible to prevent power loss. Also, the current rating will depend on the physical size of the inductor package; winding sensors are used for high power converters, while foil electric motors can be used for low power converters.

 

 

saturation current. Ferrite sensors will have some saturation current, which will saturate the core than saturation current sensors. This will cause the next switching cycle to lag. The inductor should be chosen so that the saturation current is greater than the maximum current required by the system.

inductance and frequency. All components have parasitic effects. Parasitic capacitances between windings and coil resistances can cause the system to self-resonate. In fact, the self-resonant frequency of the inductor is usually very high, so it doesn’t matter unless you intend to use a PWM signal with a very fast edge rate and a frequency around MHz.

DC DC Converter Inductor Selection and Inductor Type

Finally, and least important is the inductance value. The required inductor value depends on the topology you use, as this will determine the function the DC-DC converter needs to perform.

ข้อมูลที่เกี่ยวข้อง

  • 2023-9-4

    AC/DC Power Supply Module: Efficient and Reliable Source of Electrical Energy

    Introduction: In today's modern world, electrical energy has become an integral part of our lives. From powering our homes to running industries, the need for a stable and efficient power supply is paramount. One of the key components that ensure a consistent power flow is the AC/DC power supply module. This article aims to shed light on the importance of this module, its efficiency, and reliability in providing electrical energy. Importance of AC/DC Power Supply Module: The AC/DC power supply module plays a crucial role in converting alternating current (AC) to direct current (DC). It ensures that the electrical devices we use daily receive the right voltage and current for their optimal performance. Without this module, our electrical appliances would...

    ดูรายละเอียด
  • 2023-9-18

    AC/DC 5V Power Supply Module: Stable and Efficient Voltage Conversion Solution

    We rely on smartphones, laptops, tablets, and various other gadgets to stay connected, informed, and entertained. However, all these devices require a stable and efficient power supply to function optimally. This is where the AC/DC 5V Power Supply Module comes into play. The AC/DC 5V Power Supply Module is a cutting-edge technology that provides a stable and efficient voltage conversion solution for various electronic devices. It converts alternating current (AC) power from the main power supply to direct current (DC) power with a voltage output of 5 volts. This ensures that electronic devices receive a constant and reliable power supply, preventing any fluctuations or interruptions that could potentially damage the device. One of the key features of the AC/DC 5V...

    ดูรายละเอียด
  • 2023-4-23

    Distinguishing Between AC and DC Power Supplies

    AC and DC power supplies are two types of electrical power sources commonly used in various applications. AC stands for alternating current, while DC stands for direct current. The main difference between the two is the direction of the flow of electrons through the circuit. In this article, we will discuss the differences between AC and DC power supplies in terms of their characteristics, applications, and advantages. Characteristics of AC Power Supplies: AC power supplies provide electrical power that changes direction periodically. The voltage and current in an AC circuit oscillate sinusoidally, which means that they change direction and magnitude constantly. The frequency of this oscillation is measured in Hertz (Hz) and is typically 50 or 60 Hz in most...

    ดูรายละเอียด
  • 2023-4-20

    How to Differentiate Between an AC and DC Power Supply

    In the world of electronics, power supply is a critical component that ensures the smooth functioning of the device. The two most common types of power supply are AC and DC. Although both types of power supply serve the same purpose, they differ significantly in terms of their properties and applications. In this article, we will discuss how to differentiate between an AC and DC power supply. AC Power Supply AC stands for Alternating Current, which indicates that the flow of electrons constantly changes direction. AC power is the type of electrical energy commonly used in homes, offices, and industries. The primary source of AC power is the electrical grid that delivers power to our homes and businesses. AC power...

    ดูรายละเอียด
  • 2023-8-18

    Customized Electric Power Series: Harnessing the Energy Revolution

    Introduction: In recent years, the world has witnessed a growing demand for electricity, driven by population growth, urbanization, and industrialization. However, this surge in demand has also led to increased concerns about the sustainability, cost, and environmental impact of traditional energy sources. As a result, there has been a significant push towards harnessing the energy revolution - the adoption of cleaner and renewable sources of electric power. In this article, we will explore the various technologies and advancements that are paving the way for a sustainable energy future. 1. Solar Power: Solar power has emerged as one of the most promising sources of renewable energy. With the advancements in photovoltaic (PV) technology, solar panels have become more efficient and affordable....

    ดูรายละเอียด
  • 2023-7-21

    China AC DC Power Supply Module manufacture: Harnessing Electricity for Versatile Applications

    Introduction: Electricity is the lifeblood of modern society, powering everything from our homes to our industries. One crucial component in the distribution and utilization of electricity is the AC DC power supply module. This module plays a fundamental role in converting alternating current (AC) to direct current (DC), making it usable for a wide range of applications. In this article, we will explore the significance and various applications of the AC DC power supply module. Understanding the AC DC Power Supply Module: An AC DC power supply module is an electronic device that converts AC voltage to DC voltage. It consists of several components, including a transformer, rectifier, and filter. The transformer is responsible for stepping down or stepping up...

    ดูรายละเอียด

ตัวเลือกมากกว่า 6000+ โซลูชันการจ่ายไฟแบบครบวงจร