About Small size power module suppliers

Many open frame power supplies now offer two power ratings, one with convection or conduction cooling and one where external forced air is applied.  As some applications require low acoustic noise levels, for example in healthcare where patient comfort is important, fan-less cooling is preferred.  This can be achieved through operating a power supply at its convection rating, and if it is also capable of conduction cooling, a combination of both.

If the output load significantly varies with time it may be possible to utilize a power supply with a peak power rating.  This allows a lower power product to be selected, saving cost and reducing its size, as the convection cooled peak power rating is often the same as the forced air continuous rating.

For example, modern hospital beds are fitted with electric motors that can adjust the angle of the bed to allow the patient to sit upright, or raise the lower portion to elevate the legs. These motors may only operate for short periods of time. The same will apply to dental chairs, thermal warmers for babies, and incubators.

learn more
Small size power module suppliers
Small size power module suppliers
latest blogs
view more
ZP Series AC DC Converter: Unleashing Efficient Power Conversion


Introduction: Where energy efficiency and sustainability are of paramount importance, finding ways to convert power efficiently has become crucial. The ZP Series AC DC Converter is at the forefront of this technological innovation, offering a reliable and efficient solution for power conversion needs. This article will delve into the features and benefits of the ZP Series, highlighting its ability to unleash efficient power conversion. Efficiency and Reliability: One of the key features of the ZP Series AC DC Converter is its exceptional efficiency. With a conversion efficiency of up to 98%, it ensures minimal energy loss during the power conversion process. This high efficiency not only saves energy but also reduces costs and environmental impact. The ZP Series is designed to provide a reliable power supply, ensuring stable performance even in challenging operating conditions. Its advanced thermal management system prevents overheating and extends the lifespan of the converter, making it an ideal choice for various applications. Wide Input Voltage Range: The ZP Series AC DC Converter is designed to accommodate a wide range of input voltages, making it versatile for use in different settings. With an input voltage range of 90-264VAC, it can seamlessly integrate into various power systems without...
Bidirectional DC DC Converter: Principles and Applications


A bidirectional DC-DC converter is a power converter that can convert DC voltage from one level to another level, in both directions. This type of converter is used in applications such as electric vehicles, renewable energy systems, and energy storage systems, where there is a need for bidirectional power flow. In this article, we will discuss the principles of bidirectional DC-DC converters and their applications. Principles of Bidirectional DC-DC Converters A bidirectional DC-DC converter is a power converter that can operate in two modes: buck mode and boost mode. In buck mode, the converter steps down the input voltage to a lower output voltage. In boost mode, the converter steps up the input voltage to a higher output voltage. The bidirectional DC-DC converter can switch between these two modes depending on the direction of power flow. The bidirectional DC-DC converter uses two sets of switches to control the power flow in both directions. The switches can be either MOSFETs or IGBTs. The converter also has two separate control circuits for each direction of power flow. The control circuits monitor the input and output voltages and currents and adjust the switching frequency and duty cycle of the switches to achieve the...
How AC-DC Converters Evolved


An AC-DC converter is a device that converts alternating current (AC) to direct current (DC). This conversion is essential in electronic devices that require a steady supply of DC voltage, such as computers, smartphones, and power tools. There are two types of AC-DC converters: unregulated and regulated. Unregulated AC-DC converters are simpler and cheaper but provide an unstable output voltage that varies with changes in input voltage and load. Regulated AC-DC converters, on the other hand, provide a stable output voltage that is independent of input voltage and load. Regulated AC-DC converters are widely used in modern electronics, especially in high-performance applications where precise and reliable power is critical. The basic principle behind an AC-DC converter is rectification, which involves converting AC voltage to DC voltage. The rectification process is achieved through a diode or a group of diodes arranged in a bridge configuration. The AC voltage is fed through the diodes, which only allow current to flow in one direction, effectively converting the AC voltage to a pulsating DC voltage. The output of the rectifier is still not suitable for electronic devices as it contains ripple, which is a fluctuation in the DC voltage caused by the unfiltered AC...
DC to DC Step-Down Adjustable Power Supply Module: The Ultimate Solution for Efficient Voltage Regulation


The need for efficient voltage regulation is more critical than ever. From smartphones to electric vehicles, countless devices depend on a stable power supply to function optimally. That's where DC to DC step-down adjustable power supply modules come in. These modules offer a versatile and reliable solution for managing voltage levels, ensuring that devices operate smoothly and efficiently. One of the key advantages of DC to DC step-down adjustable power supply modules is their ability to convert a higher input voltage to a lower output voltage. This feature makes them particularly useful in situations where the input power source does not match the required voltage level. By stepping down the voltage, these modules enable devices to function with precision and accuracy. Another significant benefit of these modules is their adjustability. Unlike fixed voltage regulators, DC to DC step-down adjustable power supply modules allow users to fine-tune the output voltage according to their specific requirements. This flexibility makes them suitable for a wide range of applications, from hobbyist electronics projects to industrial automation systems. Whether you need a voltage level of 5V, 12V, or any other value within the module's specifications, you can easily configure it to meet your needs. Efficiency...
Unleashing the Power: Exploring the World of 750W Modular Power Supplies


In the ever-evolving landscape of computer hardware, the power supply unit (PSU) stands as a cornerstone for stability and performance. Modular power supplies have emerged as a game-changer, offering flexibility and efficiency. This article delves into the realm of 750W modular power supplies, unraveling their significance and exploring why they are becoming a preferred choice for a diverse range of users. Understanding 750W Modular Power Supply:   What is 750W Modular Power Supply? A 750W modular power supply refers to a unit capable of delivering 750 watts of power to a computer system. What sets it apart is its modular design, allowing users to connect only the cables they need, reducing clutter and improving airflow within the computer case.   Why 750W is Suitable for Different Needs? 750W strikes a balance between providing ample power for high-performance systems and being energy-efficient. It caters to a broad spectrum of users, from gamers and content creators to professionals seeking reliability and efficiency in their computing setups.   Characteristics and Technical Advantages of 750W Modular Power Supply: 750W modular power supplies exhibit characteristics such as modularity, efficiency, and advanced features. Their technical advantages include better cable management, higher energy efficiency, and the ability...
240V AC to 12V DC Converter wholesale – Efficient Power Conversion Solution


In today's world, where most of the electronic devices run on DC power, the requirement of a power converter has become inevitable. A 240V AC to 12V DC converter is one such solution that is efficient and reliable. It transforms the high voltage AC power from the mains into low voltage DC power suitable for powering electronic devices. The main advantage of a 240V AC to 12V DC converter is that it can be used to power a wide range of electronic devices that require low voltage DC power. These devices include radios, TVs, computers, and other electronic gadgets. The conversion process is efficient, and the output voltage is regulated, ensuring that the electronic devices receive a steady supply of power. The 240V AC to 12V DC converter is also an environmentally friendly solution, as it reduces the amount of energy wasted during the conversion process. The conversion efficiency of these converters can be as high as 80%, depending on the quality and design of the converter. The 240V AC to 12V DC converter is available in different configurations, including wall-mount, desktop, and plug-in types. The wall-mount type is typically used in industrial and commercial settings, while the desktop and...
Modular PC Power Supply: The Ultimate Solution for Customized Cable Management


With the ever-increasing need for more power in modern computers, cable management has become a crucial aspect of building and maintaining a PC. Messy and tangled cables not only obstruct airflow, leading to poor cooling performance, but also make it difficult to troubleshoot and upgrade components. To address this issue, modular PC power supplies have emerged as the ultimate solution for customized cable management. A modular power supply is designed with detachable cables that can be easily connected or disconnected from the unit. Unlike traditional power supplies where all cables are hardwired to the unit, modular power supplies allow users to choose only the cables they need and leave out the rest. This eliminates the hassle of dealing with excess cables that would otherwise clutter the inside of the PC case. One of the primary advantages of a modular power supply is the flexibility it offers. Users can select the exact cables required for their specific configuration, minimizing cable clutter and maximizing airflow within the case. This not only improves the overall aesthetics of the system but also enhances cooling performance, resulting in better stability and longevity of the components. Customization is another significant benefit of modular power supplies. PC...
High Voltage Power Supply Module: Unleashing Power for Enhanced Performance


Introduction High voltage power supply modules play a crucial role in various industries such as manufacturing, medical, research, and telecommunications. These modules are responsible for providing power to devices and equipment that require high voltages, ensuring their optimal performance. This article will explore the significance of high voltage power supply modules and how they contribute to enhancing performance in different applications. Importance of High Voltage Power Supply Modules High voltage power supply modules are designed to convert low voltage input into high voltage output, typically in the range of kilovolts (kV) or even megavolts (MV). This high voltage output is essential for several applications that demand powerful electrical energy. These modules are utilized in a wide range of industries and applications due to their ability to enhance performance and improve efficiency. Enhanced Performance in Manufacturing In the manufacturing industry, high voltage power supply modules are widely used in processes such as electrostatic painting, plasma cleaning, and electrostatic precipitators. Electrostatic painting involves applying a high voltage charge to the paint particles, enabling them to adhere to the surface more effectively. This results in a superior finish with improved adherence and reduced wastage. Similarly, plasma cleaning utilizes high voltage power supply modules...
240V AC to 12V DC Converter: Efficient and Safe Solution for Your Electrical Needs


As technology continues to advance, we rely more and more on electronic devices. However, these devices require a stable and reliable power source. For many applications, this means converting the 240V AC mains power to 12V DC. This is where a 240V AC to 12V DC converter comes in. A 240V AC to 12V DC converter is an electrical device that converts the high voltage alternating current (AC) from your mains power supply into a lower voltage direct current (DC) that can be used to power a wide range of electronic devices. These converters are widely used to power electronic devices such as LED lights, CCTV cameras, and other low voltage devices. There are many advantages to using a 240V AC to 12V DC converter. One of the main advantages is that it is efficient. A well-designed converter can convert the voltage with minimal loss of power. This means that the converter will not waste energy, which is important for reducing your energy bills. Another advantage of using a 240V AC to 12V DC converter is that it is safe. The converter is designed to be able to handle the high voltage and current of the mains power supply, but...
Top-Notch 850W Modular Power Supply for Enhanced Performance


Introduction: In today's technologically advanced world, the demand for high-performance power supplies is increasing rapidly. One such power supply that has received rave reviews for its exceptional performance is the Top-Notch 850W Modular Power Supply. Designed to meet the power needs of modern-day computer systems, this power supply offers unparalleled efficiency, reliability, and modularity. In this article, we will delve into the key features and benefits of this remarkable power supply. Unmatched Performance: The Top-Notch 850W Modular Power Supply sets a new benchmark in terms of performance. With an impressive power output of 850 watts, it caters to the power requirements of even the most demanding computer systems. Whether you are a gamer, content creator, or professional, this power supply ensures consistent and stable power delivery, allowing your system to operate at its peak performance without any disruptions. Modular Design for Easy Customization: One of the standout features of this power supply is its modular design. It comes equipped with detachable cables that allow for easy customization and cable management. This feature not only simplifies the installation process but also helps to keep the internal components of your system well-organized, leading to improved airflow and enhanced overall performance. Enhanced Efficiency...

6000+ options, one-stop power supplies solutions