Новости
О важности, структуре и выборе модуля питания постоянного тока?
Автор：Модуль питания ZYG Time： 2022-4-7
With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.
The importance of DC-DC power module:
DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.
For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.
Power structure of DC-DC power module:
The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.
The selection of power modules should be based on the following four points:
1, the use of mature power supply topology
The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.
2, high efficiency within the full load range
High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.
3, limit temperature characteristics
The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.
4, high isolation, low isolation capacitance
Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.
Предыдущий: Как выбрать качественное оформление и надежных производителей силовых модулей?
Следующий: Какой режим питания модуля
релевантная информация
-
2023-9-25
Modular PC Power Supply: Simplifying Cable Management and Customization
In the world of computer hardware, efficiency and customization are two key factors that determine the overall performance and user experience. One crucial component that plays a significant role in both aspects is the power supply. With the ever-increasing power requirements of modern computers, managing cables and customizing power delivery has become a challenge for many PC enthusiasts. However, modular power supplies have emerged as a solution to simplify cable management and provide greater customization options. Traditional power supplies come with a fixed set of cables, which often leads to a cluttered and messy interior. This not only obstructs airflow but also makes it difficult to troubleshoot or perform upgrades. In contrast, modular power supplies allow users to connect only...
Посмотреть детали -
2023-7-12
ZP Series AC DC Converter: High Efficiency and Reliable Power Conversion Solution
Introduction In today's world, where energy efficiency and reliability are paramount, having a high-quality power conversion solution is crucial. One such solution is the ZP Series AC DC Converter, designed to provide efficient and reliable power conversion for a wide range of applications. This article will delve into the various features and benefits of the ZP Series AC DC Converter, highlighting its efficiency and reliability. Efficiency Efficiency is a key factor when it comes to power conversion, as it directly impacts energy consumption and operating costs. The ZP Series AC DC Converter boasts an impressive efficiency rating, ensuring minimal energy loss during the conversion process. This high efficiency not only reduces energy wastage but also helps in maintaining a sustainable...
Посмотреть детали -
2023-5-25
Efficient 12V 15A AC to DC Converter for Reliable Power Conversion
Introduction Efficient power conversion is essential in modern electronics and electrical systems. When it comes to converting Alternating Current (AC) to Direct Current (DC), a reliable and efficient converter is needed. This article will discuss a 12V 15A AC to DC converter that is designed for efficient and reliable power conversion. What is an AC to DC Converter? An AC to DC converter is an electrical device that converts Alternating Current (AC) to Direct Current (DC). The conversion process involves rectifying the AC signal and filtering it to produce a smooth DC output. AC to DC converters are commonly used in electronic devices, such as power supplies, battery chargers, and motor drives. Features of the Efficient 12V 15A AC to...
Посмотреть детали -
2023-11-3
AC/DC Power Supply Module: Efficient and Reliable Solution for All Your Power Needs
Where technology is advancing at a rapid pace, reliable and efficient power supply solutions are crucial. Whether it is for personal use or industrial applications, having a dependable power source is essential. This is where the AC/DC power supply module comes into play – offering a versatile and reliable solution to meet all your power needs. The AC/DC power supply module is a compact device that converts alternating current (AC) into direct current (DC). It is commonly used in a wide range of applications, including telecommunications, industrial automation, medical equipment, and consumer electronics. Its ability to efficiently convert power from the mains supply to a regulated DC output makes it an indispensable component in various electronic devices. One of the...
Посмотреть детали -
2023-4-22
Building a 120V AC Power Supply for 3V DC Output
Building a 120V AC Power Supply for 3V DC Output If you need a 3V DC power supply, there are a lot of options to choose from. However, if you want to build one yourself, you can do it with a few simple components. Here\'s how to build a 120V AC power supply for a 3V DC output. Step 1: Gather Your Materials To build a 120V AC power supply for a 3V DC output, you\'ll need the following components: - Transformer with a 120V AC primary and a secondary output of 3V AC - Rectifier diode (1N4007) - Capacitor (1000uF, 25V) - Voltage regulator IC (LM7803) - Heat sink for the voltage regulator - Resistor (240 ohm) Step 2:...
Посмотреть детали -
2022-8-31
Как насчет преобразователя постоянного тока производства Китая?
В последние годы, с ростом популярности электронных продуктов, растет и спрос на преобразователи постоянного тока. Преобразователи постоянного тока китайского производства отличаются надежным качеством и доступной ценой, и все больше и больше пользователей выбирают преобразователи постоянного тока китайского производства. Преобразователь постоянного тока в постоянный — это устройство, которое преобразует постоянный ток (DC) в постоянный ток. Они производятся в Китае и могут использоваться для питания различных устройств. Если вы ищете качественный преобразователь постоянного тока в постоянный, лучшим выбором будет «Сделано в Китае». Преобразователи постоянного тока — хороший способ уйти в отставку, а Китай имеет долгую историю производства высококачественных преобразователей. Благодаря широкому ассортименту товаров вы обязательно найдете...
Посмотреть детали