소식
AC-DC 전원 공급 장치 제조업체를 선택하는 시기와 AC-DC 전원 공급 장치를 선택하면 어떤 이점이 있습니까?
저자： ZYG 전원 모듈 Time： 2022-9-14
AC DC Power Module Filling Requirements
Potting and sealing of AC DC power modules is very important. This process involves not only the protection of AC and DC power modules (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also the thermal design of AC and DC power modules.
Power module potting materials are generally divided into three categories: epoxy resin, polyurethane, and silicone rubber
Due to the hardness of epoxy resin, it cannot be used for stress-sensitive and module packaging and SMT components, so it is basically eliminated in module power supplies. But epoxy resins are also used in cost-critical micropower power supplies due to their low cost. Some domestic bad power supply manufacturers also use this epoxy resin for AC and DC power supply modules, but due to stress problems, the failure rate of this power supply is very high, and buyers are very distressed.
At present, most of the power modules are sealed with molded silicone. For the convenience of operation, the ratio of 1:1 is usually adopted. When designing for AC and DC power modules, attention should be paid to their thermal conductivity. However, the adhesion is not very strong, so a substrate coating can be used to improve sealing.
Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price of silicone rubber, polyurethane is not cost-effective. There is basically no domestic application of it.
Special attention should be paid to thermal conductivity in relation to thermal design. Generally speaking, a thermal conductivity of 0.5w/M·K is defined as high thermal conductivity, and a thermal conductivity greater than 1 is defined as very high thermal conductivity.
The power module is such a highly integrated small and medium-sized switching power supply. In recent years, with the development trend of high and new technology, it has been widely used in industrial electrical, power supply system, instrumentation, urban rail, intelligent security, new energy technology, communication, automation technology and intelligent system industry.
Make sure to type the source type first
The power module can input AC current or AC current. Normally, the FH/DC power module selects AC current input, and the DC/DC power module selects AC input. The high-cubic FH-DC power module can also be used normally under the DC input working voltage standard.
Type in the operating voltage category to select
After confirming the input source, the input working voltage can refer to the manufacturer’s motor selection structure. The communication keys are basically 120V, 230V, 220V. Now FH/DC power modules usually consider 86~265VAC or 150~370VDC types, and 220V also consider 230V types, but the probability of application at 230V will be much worse, and the DC keys are basically 5V~76V.
Select the package type of the item
Product package types include single in-line SIP package, small and medium vertical bare board, dual in-line ultra-small DIP package and rail package. The bare board is composed of a PCB circuit board and various components. It is completely exposed and not very safe, but the cost is low.
DIP packaging is usually strongly recommended. Although it is expensive to lose, it has the characteristics of potting packaging, safety protection, good heat dissipation characteristics of heat pipes, anti-freezing, moisture-proof and stable characteristics. must be selected on a case-by-case basis.
Select the output power of the goods according to the load size
When selecting the output power of the power module, it is usually strongly recommended to reserve the capacity, and the output power of the application is between 30 and 90% of the actual output power. The capacity is large and there are noise problems when working at high frequencies.
관련 정보
-
2023-6-21
AC to DC Converter Available in Store
In today's world, we are surrounded by electronic devices that require different types of voltages to operate. Some devices work on direct current (DC), while others function on alternating current (AC). The power supplied in our homes and offices is generally AC, but most electronic devices require DC to function correctly. Therefore, AC to DC converters come into the picture. An AC to DC converter is a device that converts alternating current (AC) into direct current (DC). It is also known as a rectifier or a power supply. The AC to DC converter is a vital component of any electronic device that operates on DC power. AC to DC converters are widely used in various applications, including power supplies for...
세부 정보보기 -
2023-5-15
Can you convert 12V AC to 12V DC?
Yes, it is possible to convert 12V AC to 12V DC. This process involves the use of a device called a rectifier, which is designed to convert AC voltage to DC voltage. A rectifier works by using diodes to convert the incoming AC voltage into a pulsating DC voltage. This pulsating DC voltage can then be further processed by a smoothing capacitor, which filters out the pulsations and provides a steady DC voltage output. There are two main types of rectifiers used to convert AC to DC: half-wave rectifiers and full-wave rectifiers. A half-wave rectifier only allows half of the incoming AC waveform to pass through, while a full-wave rectifier allows the entire waveform to pass through. Full-wave rectifiers are...
세부 정보보기 -
2023-7-24
China AC-DC Power Supply: A Reliable and Efficient Solution for Electrical Power Conversion
Introduction: In today's modern world, electrical power conversion plays a crucial role in various industries. Whether it is for industrial machinery, consumer electronics, or renewable energy systems, a reliable and efficient power supply is vital. One such solution that has gained significant popularity is the AC-DC power supply. This article aims to explore the benefits and applications of an AC-DC power supply and highlight its role in electrical power conversion. Understanding AC-DC Power Supply: An AC-DC power supply, also known as a rectifier, is a device that converts alternating current (AC) into direct current (DC). It comprises various components such as transformers, diodes, capacitors, and inductors to ensure efficient power conversion. The primary function of an AC-DC power supply is...
세부 정보보기 -
2023-9-26
Top Recommendations for the Best Modular Power Supply for Your Gaming PC
Building a gaming PC requires careful consideration of various components, and one crucial element that often goes overlooked is the power supply unit (PSU). A reliable and efficient PSU is essential to ensure stable power delivery to your gaming rig, allowing it to perform at its best without any interruptions or damage. Among the different types of PSUs available, modular power supplies have gained popularity for their flexibility and cable management capabilities. In this article, we will explore some of the top recommendations for the best modular power supply for your gaming PC. 1. Corsair RM750x The Corsair RM750x is a top-tier modular power supply known for its exceptional performance and reliability. With a power output of 750 watts, it...
세부 정보보기 -
2023-5-5
Designing an AC-DC Converter Circuit
Introduction An AC-DC converter circuit is a device that converts an alternating current (AC) source to a direct current (DC) source. This conversion is important because many electronic devices require a DC power source to operate. Designing an AC-DC Converter Circuit The first step in designing an AC-DC converter circuit is to determine the specifications of the circuit. This includes the input voltage range, the output voltage and current requirements, and the efficiency of the circuit. Next, the type of AC-DC converter circuit to be used must be chosen. There are several types of AC-DC converter circuits including half-wave rectifiers, full-wave rectifiers, and bridge rectifiers. Each type has its advantages and disadvantages, so the choice depends on the specific application....
세부 정보보기 -
2023-6-15
Car Outlet Converter: The Solution for Powering Your Electronics on the Go
In today's fast-paced world, staying connected is more important than ever. Whether you are using your phone to stay in touch with friends and family, your tablet to catch up on work, or your laptop to stream movies during a road trip, having a reliable source of power is essential. That's where a car outlet converter comes in. This simple device can provide power to all of your electronics on the go, making it the perfect solution for anyone who needs to stay connected while traveling. What is a Car Outlet Converter? A car outlet converter, also known as a car power inverter, is a device that allows you to plug your electronics into your car's cigarette lighter or power...
세부 정보보기