SPM36-EA
다음 시리즈 매개변수는 참조용입니다. 자세한 기술 매개변수는 기술 사양에 따릅니다.
제품 모듈 | 전력(W) | 빈(VAC) | 출력(VDC) | 출력 수 | 절연(VAC) | 패키지 | 치수(mm) | 시험 보고서 |
SPM36-S05-EA | 36 | 90~264 | 5 | 1 | 2500 | 배선 | 98*52*22 | |
SPM36-S12-EA | 36 | 90~264 | 12 | 1 | 2500 | 배선 | 98*52*22 | |
SPM36-S24-EA | 36 | 90~264 | 24 | 1 | 2500 | 배선 | 98*52*22 | |
SPM36-S48-EA | 36 | 90~264 | 48 | 1 | 2500 | 배선 | 98*52*22 |
SPM Series Advantages
1. High Precision: The SPM Series power supplies are highly precise, with an accuracy of up to 0.02%. This precision is essential for many sensitive applications, such as in aerospace, defense, and telecommunications, where small deviations in voltage or current can have significant consequences.
2. High Stability: The SPM Series power supplies are highly stable, with a stability of up to 0.01% per hour. This stability is critical for applications such as burn-in testing and production testing, where the power supply must provide a stable and consistent output over an extended period.
3. High Efficiency: The SPM Series power supplies are highly efficient, with an efficiency rating of up to 93%. This not only reduces energy consumption and operating costs, but also minimizes the amount of heat generated by the power supply, which can help to extend the lifespan of the power supply and the devices it powers.
4. Advanced Features: The SPM Series power supplies offer a range of advanced features, including multiple output channels, synchronization, and phase control. These features can help improve the performance and reliability of the power supply and the equipment it powers, especially in critical applications.
5. Ease of Use: The SPM Series power supplies are designed to be easy to use, with intuitive controls and a user-friendly interface. This makes them ideal for engineers, researchers, and system integrators who need to quickly set up and use the power supply for various applications.
6. High Reliability: The SPM Series power supplies are designed and manufactured to meet or exceed industry standards for safety, efficiency, and performance. They are subject to extensive testing and quality control procedures to ensure they can operate reliably and consistently in a variety of conditions and environments.
7. Broad Application Range: The SPM Series power supplies are used in a wide range of applications, including research and development, quality control, production testing, and burn-in testing. They are designed to provide reliable, stable, and accurate power output in a variety of settings and environments, and are a trusted choice for engineers, researchers, and system integrators around the world.
관련 정보
-
2023-9-16
Maximize Efficiency and Flexibility with a Modular Power Supply for Your PC
Having a reliable and efficient power supply is crucial for any PC user. Whether you are a gamer, a professional, or a casual user, investing in a modular power supply can significantly enhance your computing experience. A modular power supply provides several benefits, including increased efficiency, flexibility, and overall system performance. One of the primary advantages of a modular power supply is its enhanced efficiency. These power supplies are designed to deliver power more efficiently, resulting in reduced energy consumption and lower electricity bills. Traditional power supplies have fixed cables that can lead to cable clutter, hindering proper airflow within the PC case. This can cause overheating and reduced efficiency. In contrast, a modular power supply allows users to connect...
세부 정보보기 -
2023-5-4
Design and Development of an Industrial AC-DC Converter
Introduction Industrial AC-DC converters are essential components in modern power electronics systems. They convert alternating current (AC) power from the grid to direct current (DC) power for use in various industrial applications. The design and development of an efficient industrial AC-DC converter require a thorough understanding of power electronics principles and a careful selection of components to ensure optimal performance. This article discusses the essential steps involved in the design and development of an industrial AC-DC converter. Step 1: Determine the Specifications The first step in the design process is to determine the specifications of the industrial AC-DC converter. The specifications should include the input voltage and frequency, output voltage and current, power rating, and efficiency requirements. These specifications will...
세부 정보보기 -
2023-5-12
24V AC to DC Converter: Converting Alternating to Direct Current
Introduction In today's world, electricity is an integral part of our daily lives. It powers almost everything we use, from the lights in our homes to the computers we work on. However, the electricity we use is not always in a form that we can use. Alternating current (AC) is the form of electricity that is typically supplied by power companies, while most of our devices and appliances require direct current (DC) to operate. This is where a 24V AC to DC converter comes in handy. What is a 24V AC to DC Converter? A 24V AC to DC converter is a device that converts alternating current (AC) into direct current (DC). It takes in AC power and outputs DC...
세부 정보보기 -
2023-6-2
China AC DC Converter SPM Series manufacture
The AC DC Converter SPM Series is a power supply device that is able to convert alternating current (AC) into direct current (DC). This series of converters is produced by one of the leading companies in the field of power electronics, Mitsubishi Electric. The AC DC Converter SPM Series is designed to meet the demands of various industrial applications. Its wide input voltage range (85V to 264V) allows it to be used in a variety of settings, while its compact size and high efficiency make it an ideal choice for space-constrained installations. One of the key features of the SPM Series is its high reliability. This is achieved through the use of advanced technology, such as a built-in power factor...
세부 정보보기 -
2023-7-28
24V AC to DC Converter manufacture: Efficient and Reliable Solution for Power Conversion
Power conversion plays a vital role in various industries and applications, from electronics and telecommunications to renewable energy systems. In these systems, the conversion of alternating current (AC) to direct current (DC) is essential for proper functioning. One efficient and reliable solution for this conversion is the 24V AC to DC converter. The 24V AC to DC converter is specifically designed to convert the 24V alternating current to a stable and regulated direct current output. It is widely used in a range of applications such as industrial automation, control systems, power supplies, and battery charging. This converter offers several benefits and features that make it an ideal choice for power conversion. Efficiency is a crucial factor when it comes to...
세부 정보보기 -
2022-9-1
AC-DC 컨버터 제조업체 – 필요에 맞는 것을 선택하는 방법
AC-DC 컨버터란? 왜 사용합니까? AC-DC 변환기는 교류(AC)를 직류(DC)로 변환하는 장치입니다. AC-DC 컨버터는 전원 공급 장치, 모터 제어 및 조명을 비롯한 다양한 애플리케이션에 사용됩니다. 일부 의료 기기에서는 직류를 사용해야 합니다. 또는 자동차 배터리를 충전해야 하는 경우 AC-DC 변환기를 사용할 수 있습니다. AC-DC 변환기의 특성은 무엇입니까? 응용 분야는 무엇입니까? AC-DC 변환기는 교류를 직류로 변환하는 장치입니다. 넓은 입력 전압 범위, 높은 입력 주파수, 고효율, 경량 및 휴대성, 저렴한 비용 등의 장점이 있습니다. AC-DC 컨버터는 주로 휴대폰 충전기, 라디오, 노트북에 사용됩니다...
세부 정보보기