DP10-220SX
DP miniaturization pin series has important applications in many fields such as photovoltaic, instrument and instrument.
A super small size.
The whole thickness is only 15mm.
Very low no-load loss.
The product is safe and reliable.
Good at EMC.
Ues in smart home.
3년 품질 보증.

더 많은 모듈을 보려면 시리즈 번호를 클릭하십시오.
다음 시리즈 매개변수는 참조용입니다. 자세한 기술 매개변수는 기술 사양에 따릅니다.
시리즈 제목 | 전력(W) | 빈(VAC) | 출력(VDC) | 출력 수 | 절연(VAC) | 패키지 | 치수(mm) | |
DP10-220SX | 10 | 100-400 | 3.3-24 | 1 | 3000 | 기준 치수 | 32*20*15 | ![]() |
DP20-220SX | 20 | 100-400 | 3.3-24 | 1 | 4000 | 기준 치수 | 50.8*25.4*15.5 | ![]() |
DP25-220SX | 25 | 100-400 | 12-24 | 1 | 4000 | 기준 치수 | 50.8*25.4*15.5 | ![]() |
DP 시리즈(10~25W) | ![]() |
관련 정보
-
2023-5-11
China 12V AC to DC Converter Module – Efficient Power Conversion Solution
In today's world, electronic devices have become an integral part of our lives. From smartphones to laptops, from TV to refrigerators, almost every electronic appliance requires a power source to function. In most cases, these devices require a DC voltage as a power source, while the electrical supply is usually in the form of AC voltage. Therefore, it is essential to have a device that can convert AC voltage to DC voltage. This is where the 12V AC to DC converter module comes in. The 12V AC to DC converter module is an efficient power conversion solution that can convert the 12V AC voltage into a regulated 12V DC voltage. The module is a small electronic device that can be...
세부 정보보기 -
2023-5-2
Designing an AC-DC Converter Circuit
Introduction AC-DC converters are electronic circuits used to convert an AC voltage to a DC voltage. These circuits are used in a wide range of devices, including power supplies for electronic equipment, battery chargers, and LED drivers. In this article, we will discuss the design of an AC-DC converter circuit. Design Considerations The design of an AC-DC converter circuit involves several considerations, including the input voltage, output voltage, output current, and efficiency. The input voltage is the AC voltage that is to be converted to DC. The output voltage is the DC voltage required for the load. The output current is the current that the load requires. The efficiency is the ratio of the output power to the input power....
세부 정보보기 -
2023-4-26
Designing an AC-DC Converter Circuit for Efficient Power Conversion
An AC-DC converter circuit is an electronic device that converts alternating current (AC) into direct current (DC). It is an important component of many electronic devices and systems, including power supplies, motor drives, and lighting systems.When designing an AC-DC converter circuit, several factors must be considered to ensure efficient power conversion. These include the input voltage and frequency, the output voltage and current, and the efficiency of the circuit.One of the first steps in designing an AC-DC converter circuit is to determine the input voltage and frequency. This will depend on the specific application and the power source available. The input voltage and frequency will determine the type of circuit topology that can be used, such as a full-bridge or...
세부 정보보기 -
2022-7-19
중국 AC-DC 전원 공급 장치 수출 업체는 AC와 DC를 구별합니다.
DC와 AC의 차이점의 본질은 AC가 부하에 영향을 미치는 방향 변경 측면에서 두 세트의 교류 DC로 볼 수 있다는 것입니다. 기간. 충분히 짧은 시간 동안 교류는 한 방향으로 흐르는 일련의 직류로 이해할 수 있습니다. 우리가 전기를 사용하면 결국 전기의 효과를 보게 됩니다. 저항 부하의 경우 이것은 열 효과이므로 AC와 DC의 최종 효과는 모두 가열과 정확히 동일하지만 AC의 크기가 일반적으로 변경되기 때문에 "rms"를 얻습니다...
세부 정보보기 -
2023-5-2
AC-DC Converter Module: The Key to Efficient Power Conversion
AC-DC converter modules are crucial elements in the world of power electronics. They are devices that convert alternating current (AC) power into direct current (DC) power, which is necessary for powering electronic devices such as computers, mobile phones, and home appliances. AC-DC converter modules are widely used in various applications, ranging from power supplies for consumer electronics to industrial power systems. The importance of AC-DC converter modules lies in their ability to efficiently convert AC power into DC power. The efficiency of the conversion process is crucial as it affects the amount of power that is lost during the conversion. The higher the efficiency of the converter, the lower the amount of power that is wasted as heat, and the...
세부 정보보기 -
2023-5-4
Design and Development of an Industrial AC-DC Converter
Introduction Industrial AC-DC converters are essential components in modern power electronics systems. They convert alternating current (AC) power from the grid to direct current (DC) power for use in various industrial applications. The design and development of an efficient industrial AC-DC converter require a thorough understanding of power electronics principles and a careful selection of components to ensure optimal performance. This article discusses the essential steps involved in the design and development of an industrial AC-DC converter. Step 1: Determine the Specifications The first step in the design process is to determine the specifications of the industrial AC-DC converter. The specifications should include the input voltage and frequency, output voltage and current, power rating, and efficiency requirements. These specifications will...
세부 정보보기