소식
중국 소형 파워모듈 제조사 소개
저자： ZYG 전원 모듈 Time： 2022-5-5
When we choose a power module, we generally look at the quality of the input, output, ripple, breakdown, temperature, certification, and other characteristics of the power supply. Apart from these, we can also judge according to the following points.
1. Circuit principle and soldering process The bare board can use intuitive methods, such as a neat layout of components and potting modules without being exposed and unable to view the internal situation. The quality of the mechanized wave soldering process is better than manual soldering, generous, but Better in terms of safety and performance
2. The core of the power supply of chip components and transformer components is IC, which will directly affect the power and high-temperature resistance of the entire power transformer components. . Responsible for accomplishing AC-DC and saturating the fryer during energy overload.
3. Is it an electrolytic capacitor or a ceramic capacitor?
1）. The electrolytic capacitor is a temperature-sensitive component after the electrolyte heats up and explodes.
2）. Ceramic capacitors are mainly non-polar, and the switching frequency will cause the parasitic resistance of the capacitor to heat up. Good dielectric materials and capacity should not be too large. Most, it is widely used in high-frequency circuits.
4. Batch testing of aging and high-temperature aging No matter how good the quality stability of product materials and production process control is and whether the materials have potential safety hazards, aging needs to be detected. Only through power aging and high-temperature pumping detection.
The benefits of choosing a China Small size power module manufacturers
Power savings of up to 25% can be achieved with these new power switches, and the reduction in power consumption brings many improvements. On the one hand, the heat dissipation design of the heat sink and the overall module can be more compact and have higher cost performance. Providing the same output power but with a smaller product is an important advantage, especially in pump or fan designs. In general, by using smaller electronic drives, controlled motors can be used in applications that were not possible before. Also, reduced use of production materials means lower costs for production, transportation, and recycling, which all boil down to product life cycle costs.
On the other hand, the maximum output power can be increased while maintaining the consistency of the existing design parameters. Products that use the same thermal design but consume less power have higher reliability, because there is a less thermal excursion, and the failure rate is greatly reduced. Moreover, the same design can evolve into a variety of different models by simply replacing different output power chips, thereby shortening the time to market.
We have more modules with different powers, if you want to know more, please contact us.
관련 정보
-
2023-10-13
Highly Efficient 1000W Modular Power Supply: Unleash the Power in Style
In the world of technology, power is everything. Whether you’re a gaming enthusiast, a professional video editor, or a computer programmer, having a reliable and efficient power supply is crucial to unleashing the full potential of your system. That’s where the Highly Efficient 1000W Modular Power Supply comes into play. With a power output of 1000W, this modular power supply packs a punch. It is designed to handle the high demands of modern systems, ensuring that your computer runs smoothly and efficiently, no matter the task at hand. From intense gaming sessions to resource-intensive video rendering, this power supply has got you covered. One of the key features of this power supply is its modularity. Unlike traditional power supplies where...
세부 정보보기 -
2023-5-25
Efficient 110V AC to 12V DC Converter for Your Devices: Compact and Reliable Solution
When it comes to powering your electronic devices, having a reliable and efficient converter is key. The 110V AC to 12V DC converter is a compact and powerful solution for many devices. In this article, we'll take a closer look at what this converter is, how it works, and some of its benefits. What is a 110V AC to 12V DC Converter? A 110V AC to 12V DC converter is an electronic device that converts AC (alternating current) power to DC (direct current) power. This converter is typically used to power low voltage electronic devices, such as LED lights, security cameras, and other similar devices. How Does a 110V AC to 12V DC Converter Work? The 110V AC to 12V...
세부 정보보기 -
2023-12-3
Efficient and Flexible: The 650W Fully Modular Power Supply for Optimal Power Management
With the advancement of technology, the demand for efficient and flexible power management has become crucial. This is where the 650W Fully Modular Power Supply comes into play. Designed to provide optimal power management, this power supply is a game-changer in the industry. Efficiency is a key factor in any power supply, and the 650W Fully Modular Power Supply delivers on this front. With its advanced design and high-quality components, it ensures minimal power loss and maximum energy efficiency. This means that you can enjoy a reliable power supply while reducing your electricity bills. One of the standout features of this power supply is its fully modular design. Unlike traditional power supplies, where all the cables are fixed, the modular...
세부 정보보기 -
2023-9-15
China DC to DC Power Supply Module: Efficiently Transforming Voltage for Enhanced Performance
Introduction: Where technology is advancing at an unprecedented pace, the need for efficient power supply solutions has become a critical requirement. DC to DC power supply modules have emerged as a reliable solution for transforming voltage levels to enhance the performance of electronic devices. This article aims to explore the significance of these modules and shed light on their functioning and advantages. Understanding DC to DC Power Supply Modules: DC to DC power supply modules are compact electronic devices designed to convert direct current (DC) voltage from one level to another. They are commonly used in various applications, including telecommunications, automotive, industrial control systems, and portable electronic devices. These modules utilize switching techniques to transform the voltage efficiently and maintain...
세부 정보보기 -
2023-8-3
High quality 24V AC to DC Converter: Efficient Power Conversion for Your Electronics
In today's increasingly digital world, electronics play a vital role in our daily lives. From smartphones and laptops to home appliances and automation systems, these devices require a stable and efficient power supply to function properly. This is where a 24V AC to DC converter comes into play, providing a reliable power conversion solution for various electronic applications. First and foremost, it is essential to understand the difference between AC (alternating current) and DC (direct current) power. AC power is the type of electricity supplied by the power grid, where the direction of current periodically changes. On the other hand, DC power flows in a constant direction, making it ideal for powering electronic devices. However, since most power sources, such...
세부 정보보기 -
2023-5-21
Efficient AC to DC Converter for LED Lighting: Converting 12V Power Supply
The increasing popularity of LED lighting has led to the need for efficient AC to DC converters that can convert 12V power supply to the required DC voltage for LED lights. This article will discuss the importance of efficient AC to DC converters for LED lighting and the factors that affect their efficiency. Efficient AC to DC converters for LED lighting are important because they help to minimize power loss and increase the overall efficiency of the lighting system. Inefficient converters can result in thermal loss, which not only wastes energy but also reduces the lifespan of the LED light source. Therefore, an efficient AC to DC converter is essential for optimizing the performance of LED lighting systems. One of...
세부 정보보기