품질 클리어런스 및 신뢰할 수있는 전원 모듈 제조업체를 선택하는 방법은 무엇입니까?
- 블로그 - 회사 뉴스 - 중국 AC-DC 전원 공급 장치 수출 업체는 AC와 DC를 구별합니다.

중국 AC-DC 전원 공급 장치 수출 업체는 AC와 DC를 구별합니다.

저자: ZYG 전원 모듈 Time: 2022-7-19

The essence of the difference between DC and AC is that AC can be seen as two sets of alternating DCs in terms of direction changes to exert an effect on the load, which can be understood as the vector sum of the two sets of DCs at different time periods. For a sufficiently short period of time, alternating current can be understood as a set of direct currents in one direction.

When we use electricity, we end up seeing the effects of electricity. For resistive loads, this is a thermal effect, so the final effect of AC and DC is exactly the same, both heating, but since the magnitude of the AC is usually changing, we get an “rms” to equate the DC effect. But for inductive and capacitive loads, AC has a direction and can “pass through” smoothly. They cannot be achieved by DC. Also, AC can produce a changing magnetic field, and a changing magnetic field can produce a changing electric field, so the energy can be very Converts and transmits easily. Therefore, alternating current is more widely used. For example, a transformer can simply change the value of voltage, while direct current cannot do it directly. For example, radio transmission also requires these alternating voltages to generate a changing magnetic field, where in one direction Some direct currents cannot meet the requirements.

 

 

Because direct current has only one direction, it is relatively simple to use. It can be easily divided into two states: high and low. In this way, the physical state of binary 0s and 1s can be achieved simply. Therefore, the chip logic control of course requires direct current, and alternating current is too complicated.

Even in some power supply changes, it is common to convert AC to DC first, then stabilize the voltage and simplify it, and then invert another AC by chopping, like frequency converters and switching power supplies.

We are a China AC-DC Power Supply exporter, all products are certified by the state, and you can use them with confidence. Welcome to 문의하기 AC-DC Power Supply exporter. Large-scale factory production to meet the needs of large orders.
We are an experienced Chinese exporter and can provide you with online services..

관련 정보

  • 2023-5-22

    Efficient AC-DC Converter for Your Car: Power Up Your Devices on the Go

    An efficient AC-DC converter for your car is a must-have device for anyone who frequently travels by car and needs to power up their devices on the go. With the increasing use of smartphones, tablets, laptops, and other electronic devices, it has become essential to have a reliable and efficient power source in your car. An AC-DC converter is a device that converts the alternating current (AC) from your car's battery to direct current (DC) that can be used to power up your devices. It is a small, portable device that can be plugged into your car's cigarette lighter socket or any other 12V power socket. There are many benefits to using an efficient AC-DC converter in your car. Firstly,...

    세부 정보보기
  • 2023-5-15

    24V AC to DC Converter: Converting Alternating Current to Direct Current

    A 24V AC to DC converter is a device that is used to convert alternating current (AC) to direct current (DC). This type of converter is commonly used in electronic devices and equipment that require a stable and consistent power supply. In this article, we will discuss the basic principles of AC to DC conversion, the different types of 24V AC to DC converters, and their applications. Principles of AC to DC Conversion AC power is supplied to most homes and buildings through the power grid. AC power changes direction and magnitude periodically, which means that the voltage level of the power supply may vary over time. In contrast, DC power flows in only one direction and maintains a constant...

    세부 정보보기
  • 2022-5-16

    오류 처리 시 스위칭 전원 공급 장치의 안전을 보장하는 방법은 무엇입니까?

    실패를 처리하는 과정에서 어떤 문제에 주의를 기울여야 하는지 알고 있습니까? 모두를 안전하게 지키기 위해. (1) 오류 처리 유도 전력 실제 작동 과정에서 대부분의 시간 동안주의를 기울여야하므로 DC 출력, 통신 AC 입력 단락, 모든 종류의 유지 보수 특수 도구가 절연 층을 잘 수행해야합니다. 치료, 생명의 안전을 보장하고 전원 공급 장치 기계 장비 전원 공급 장치 안전을 전환하십시오. (2) 실제 작업에서 가능한 한 한 손으로 작업할 때 실제 작업 손은 절연 신발과 함께 시계, 열쇠, 반지 등과 같은 금속 재료 전기 도체 장식을 포함하는 것을 허용하지 않습니다. ..

    세부 정보보기
  • 2023-4-25

    AC-DC Power Supply: Reliable and Efficient Solution for All Your Power Needs

    An AC-DC power supply is a reliable and efficient solution for all your power needs. This type of power supply can convert alternating current (AC) power from the wall outlet to direct current (DC) power that is suitable for powering electronic devices. One of the key benefits of an AC-DC power supply is its reliability. These power supplies are designed to provide consistent and stable power output, even in demanding environments. This makes them an ideal choice for use in industrial, medical, and military applications, where reliability is critical. Another advantage of an AC-DC power supply is its efficiency. These power supplies can convert AC power to DC power with high efficiency, which means that less power is wasted as...

    세부 정보보기
  • 2023-12-4

    DC to DC Step Down Adjustable Power Supply Module: Efficient Voltage Regulation for Customized Power Outputs

    In today's rapidly evolving technological landscape, the need for reliable and efficient power supply modules is paramount. Whether it is powering electronic devices, charging batteries, or providing stable voltage outputs for various applications, having a versatile and adjustable power supply module is essential. One such solution that has gained popularity in recent years is the DC to DC step-down adjustable power supply module. This module not only offers efficient voltage regulation but also allows for customized power outputs based on specific requirements. In this article, we will delve deeper into the functionality and benefits of this innovative power supply module. Functionality: The DC to DC step-down adjustable power supply module serves the purpose of reducing the input voltage to a...

    세부 정보보기
  • 2023-3-31

    중국 DC-DC 컨버터 제조에서 품질 관리의 중요성

    품질 관리는 제조의 모든 측면, 특히 중국 DC-DC 컨버터 제조에서 매우 중요합니다. DC-DC 컨버터는 하나의 전압 레벨을 다른 레벨로 변환하는 장치로 자동차, 항공 우주, 의료 및 전자 제품을 포함한 다양한 산업에서 사용됩니다. 품질 관리는 DC-DC 컨버터가 필수 사양, 성능 표준 및 안전 규정을 충족하는지 확인합니다. 이 기사에서는 중국 DC-DC 컨버터 제조에서 품질 관리의 중요성에 대해 설명합니다. DC-DC 변환기 기본 사항 DC-DC 변환기는 한 전압 수준을 다른 전압 수준으로 변환하는 장치입니다. 인덕터, 커패시터, 다이오드 및 변압기를 포함한 여러 구성 요소로 구성됩니다. 변환기는 입력 신호에 따라 출력 전압을 조절하기 위해 펄스 폭 변조를 사용하여 작동합니다. 이 변환기가 들어옵니다...

    세부 정보보기

6000개 이상의 옵션, 원스톱 전원 공급 장치 솔루션