소식
Building a 120V AC to 3V DC Power Supply
저자： ZYG 전원 모듈 Time： 2023-4-18
Introduction:
A power supply is an essential component in any electrical or electronic system. It provides the necessary power for the system to operate. In this article, we will discuss how to build a 120V AC to 3V DC power supply. The power supply can be used for a variety of applications such as powering low voltage circuits, charging batteries, and powering small electronic devices.
Design:
The power supply is designed to convert the 120V AC voltage from the mains into a 3V DC voltage. The power supply consists of a transformer, a bridge rectifier, and a voltage regulator.
Transformer:
The transformer is used to step down the 120V AC voltage to a lower voltage suitable for the power supply. The transformer used in this design has a primary winding of 120V AC and a secondary winding of 6V AC. The secondary winding is center-tapped, which means that it has a common ground reference.
Bridge Rectifier:
The bridge rectifier is used to convert the AC voltage from the transformer into a DC voltage. The bridge rectifier is made up of four diodes that are arranged in a bridge configuration. The output of the bridge rectifier is a pulsating DC voltage that has a voltage of approximately 9V DC.
Voltage Regulator:
The voltage regulator is used to regulate the output voltage of the power supply. In this design, a LM317 voltage regulator is used. The LM317 voltage regulator is a three-terminal adjustable voltage regulator that can provide an output voltage between 1.25V and 37V. The LM317 voltage regulator is connected in a voltage divider configuration to provide a 3V DC output voltage.
Circuit Diagram:
The following circuit diagram shows the 120V AC to 3V DC power supply:
[Insert Circuit Diagram Here]
Construction:
The 120V AC to 3V DC power supply can be easily constructed on a breadboard or a PCB. The components required for the power supply are:
1. Transformer: 120V AC to 6V AC center-tapped transformer
2. Bridge Rectifier: 4x 1N4007 diodes
3. Voltage Regulator: LM317
4. Capacitors: 1x 2200uF electrolytic capacitor, 1x 0.1uF ceramic capacitor
5. Resistors: 2x 220 ohm resistors, 1x 240 ohm resistor
6. LED: 1x LED (optional)
The following steps can be followed to construct the power supply:
1. Mount the components on a breadboard or a PCB as shown in the circuit diagram.
2. Connect the 120V AC input to the primary winding of the transformer.
3. Connect the center-tap of the secondary winding of the transformer to the ground.
4. Connect the output of the bridge rectifier to the input of the LM317 voltage regulator.
5. Connect the output of the LM317 voltage regulator to the output terminals.
6. Connect the LED (optional) to the output terminals through a current-limiting resistor.
Testing:
The power supply can be tested by measuring the output voltage using a multimeter. The output voltage should be approximately 3V DC. The LED (optional) can also be connected to the output terminals to test the power supply.
Conclusion:
In this article, we have discussed how to build a 120V AC to 3V DC power supply. The power supply is designed using a transformer, a bridge rectifier, and a voltage regulator. The power supply can be used for a variety of applications such as powering low voltage circuits, charging batteries, and powering small electronic devices. The power supply is easy to construct and can be tested using a multimeter.
관련 정보
-
2023-6-12
DC DC Converter EX Series: Advanced Power Conversion Solutions
The DC DC Converter EX Series is a cutting-edge power conversion solution that is designed to meet the increasing demand for high efficiency and reliable power management systems. This series of converters is designed to convert DC power from one voltage level to another, making it ideal for a wide range of applications such as telecommunications, industrial automation, medical equipment, and renewable energy systems. One of the key features of the DC DC Converter EX Series is its high power density. This means that the converters are capable of delivering high power output in a compact size, which makes them perfect for applications where space is limited. The series also offers a wide input voltage range, which allows the converters...
세부 정보보기 -
2023-6-11
Bidirectional DC-DC Converter: A Versatile Power Conversion Solution
In recent years, renewable energy sources such as solar panels and wind turbines have become increasingly popular due to the growing concern over climate change and the depletion of fossil fuels. However, these sources of energy are often intermittent and require energy storage systems to ensure a reliable and constant supply of electricity. Bidirectional DC-DC converters have emerged as a versatile and efficient solution for energy storage and power conversion in renewable energy systems. A bidirectional DC-DC converter is a power electronic device that converts DC power from one voltage level to another, while also allowing power to flow in both directions. This means that it can charge a battery or energy storage system by converting power from a solar...
세부 정보보기 -
2022-11-18
전원 모듈 선택 방법 및 주의 사항, 각각 매우 중요합니다.
첨단 기술의 시대에 파워 모듈은 찾기 어렵지 않으며 많은 전기 장비가 이를 필요로 합니다. 너무나 평범한 아이템이지만 기계의 정상적인 작동은 전원 공급 장치와 많은 관련이 있기 때문에 실제로는 큰 역할을 합니다. 매우 중요하기 때문에 구매 및 사용에 더욱 주의를 기울여야 합니다. 다음 항목은 매우 중요합니다. 1. 브랜드에 집중 파워 모듈의 정상적인 사용을 보장하기 위해 브랜드 상인의 제품은 관련 생산 자격이 있고 제품 안전성이 훨씬 높기 때문에 구매할 때 신뢰할 수 있는 브랜드를 선택해야 합니다. 법적 자격없이 일부 전력 제품을 구입하면 ...
세부 정보보기 -
2023-10-17
Understanding the Concept of Modular Power Supply: A Comprehensive Definition
Introduction In the world of computer hardware, one term that often pops up is modular power supply. However, many people are not familiar with what it actually means and how it can benefit them. In this article, we will provide a comprehensive definition of modular power supply and explain its significance in modern computing systems. By the end of this article, readers will have a clear understanding of the concept and its advantages. Definition of Modular Power Supply Modular power supply refers to a type of power supply unit (PSU) designed for computer systems, where the cables that connect the PSU to the various components can be detached and reattached as needed. Unlike non-modular PSUs, which have fixed cables, modular...
세부 정보보기 -
2023-7-21
How to find AC to DC Converter in stores
In today's technologically advanced world, the need for efficient power supply is of utmost importance. Many electronic devices and appliances operate on direct current (DC) while the main power supply is alternating current (AC). To bridge this gap, an AC to DC converter is required. Fortunately, there are various types of AC to DC converters readily available at stores. An AC to DC converter, also known as a rectifier, is a device that converts alternating current (AC) into direct current (DC). This conversion is crucial as most electronic devices, such as mobile phones, laptops, and televisions, require a stable DC power supply to function effectively. These converters play a vital role in ensuring proper functioning and longevity of electronic appliances....
세부 정보보기 -
2023-4-12
Transforming AC to DC: The AC-DC Converter
Transforming AC to DC: The AC-DC Converter The world we live in is powered by electricity, and it is essential to have a steady and reliable supply of electrical power. However, the power that we get from the power grid is alternating current (AC), whereas most of the electronic devices that we use require direct current (DC). Therefore, we need a way to convert AC power to DC power, and this is where the AC-DC converter comes in. An AC-DC converter, also known as a rectifier, is a device that converts alternating current (AC) to direct current (DC). The process of converting AC to DC involves two stages: rectification and smoothing. Rectification is the process of converting the AC voltage...
세부 정보보기