품질 클리어런스 및 신뢰할 수있는 전원 모듈 제조업체를 선택하는 방법은 무엇입니까?
- 블로그 - 회사 뉴스 - 3볼트 DC 출력을 위한 120볼트 AC 전원 공급 장치 구축

3볼트 DC 출력을 위한 120볼트 AC 전원 공급 장치 구축

저자: ZYG 전원 모듈 Time: 2023-4-23

소개

전자 장치의 경우 전원 공급 장치는 장치가 올바르게 작동하는 데 필요한 전원을 공급받도록 하는 필수 구성 요소입니다. 이 기사에서는 3볼트 DC 출력을 제공하는 120볼트 AC 전원 공급 장치를 구축하는 방법에 대해 설명합니다.

전원 공급 장치 설계

전원 공급 장치 구축을 시작하기 전에 먼저 설계해야 합니다. 전원 공급 장치는 AC-DC 변환 및 전압 조정의 두 가지 주요 단계로 구성됩니다.

AC-DC 변환

AC 전원을 DC 전원으로 변환하기 위해 브리지 정류기를 사용합니다. 브리지 정류기는 AC 전원을 맥동 DC 전원으로 변환하는 회로입니다. 이 회로는 브리지 구성으로 배열된 4개의 다이오드로 구성되어 있으므로 이름이 붙여졌습니다. 브리지 정류기의 출력은 순수한 DC가 아니라 AC 전압의 양의 피크와 음의 피크 사이에서 변하는 맥동 DC 전압입니다. 맥동하는 DC 전압을 부드럽게 하려면 커패시터 필터를 사용해야 합니다.

전압 규정

AC-DC 변환 후에도 출력 전압은 안정적인 DC 전압을 제공하기 위해 여전히 조정이 필요합니다. 출력 전압을 제어하기 위해 전압 조정기를 사용합니다. 전압 조정기는 입력 전압, 부하 전류 또는 온도의 변화에 관계없이 일정한 전압 레벨을 유지하는 장치입니다.

전원 공급 장치 구축

전원 공급 장치를 설계했으므로 이제 구축을 시작할 수 있습니다. 전원 공급 장치의 개략도는 그림 1에 나와 있습니다.

그림 1: 120V AC ~ 3V DC 전원 공급 장치의 개략도.

재료

전원 공급 장치를 구축하려면 다음 자료가 필요합니다.

– 1 x 120V AC - 9V AC 변압기(1A)

– 4 x 1N4007 다이오드

– 1 x 2200μF/16V 전해 커패시터

– 1 x LM7803 전압 조정기

– 1 x 0.1μF 세라믹 커패시터

– 1 x 10μF/16V 전해 커패시터

– 1 x 3V LED

– 1 x 220Ω 저항기

 

 

단계별 지침

1. 변압기의 AC 입력을 브리지 정류기에 연결하여 시작합니다. 브리지 정류기의 양극 및 음극 출력을 각각 커패시터의 양극 및 음극 단자에 연결합니다.

2. 다음으로 커패시터의 출력을 전압 조정기의 입력에 연결합니다. 전압 조정기의 출력을 0.1μF 세라믹 커패시터에 연결한 다음 10μF 전해 커패시터에 연결합니다.

3. 조절기의 출력은 3볼트 DC여야 합니다. LED의 양극을 레귤레이터의 출력에 연결하고 음극을 220Ω 저항에 연결합니다. 마지막으로 저항의 다른 쪽 끝을 접지에 연결합니다.

전원 공급 장치 테스트

부하를 전원 공급 장치에 연결하기 전에 먼저 테스트하는 것이 중요합니다. 멀티미터를 전원 공급 장치의 출력에 연결하고 전압을 측정합니다. 3볼트 DC에 가까워야 합니다.

결론

120V AC ~ 3V DC 전원 공급 장치를 구축하는 것은 간단하고 직관적인 프로세스입니다. 이 문서에 제공된 단계를 따르면 다양한 전자 장치에 전원을 공급할 수 있는 안정적인 전원 공급 장치를 만들 수 있습니다. 사고를 피하기 위해 전기로 작업할 때 필요한 예방 조치를 취하는 것을 잊지 마십시오.

관련 정보

  • 2023-6-13

    24V AC to DC Converter: Transforming Alternating Current into Direct Current

    Alternating current (AC) is the type of electrical current that we most commonly use in our homes and businesses. However, many electronic devices and appliances require direct current (DC) to function properly. In order to convert AC into DC, a 24V AC to DC converter is often used. A 24V AC to DC converter is a device that transforms the voltage of an AC power source into a steady DC voltage. This device is commonly used in a variety of applications, including in computers, televisions, and other electronic devices. The process of converting AC into DC involves several steps. The first step is to use a transformer to change the voltage of the AC power source. This is necessary because...

    세부 정보보기
  • 2023-4-20

    How to Differentiate Between an AC and DC Power Supply

    In the world of electronics, power supply is a critical component that ensures the smooth functioning of the device. The two most common types of power supply are AC and DC. Although both types of power supply serve the same purpose, they differ significantly in terms of their properties and applications. In this article, we will discuss how to differentiate between an AC and DC power supply. AC Power Supply AC stands for Alternating Current, which indicates that the flow of electrons constantly changes direction. AC power is the type of electrical energy commonly used in homes, offices, and industries. The primary source of AC power is the electrical grid that delivers power to our homes and businesses. AC power...

    세부 정보보기
  • 2023-6-8

    How to Convert 110V AC to 12 Volt DC?

    Converting 110V AC to 12 Volt DC can be a bit tricky, especially if you're not familiar with electrical work. But with the right tools and knowledge, it can be done safely and efficiently. In this article, we'll take a closer look at the steps involved in converting 110V AC to 12 Volt DC. Step 1: Understand the Basics Before you even begin the process of converting 110V AC to 12 Volt DC, it's important to have a basic understanding of how electricity works. AC, or alternating current, is the type of electricity that comes out of your wall outlets. DC, or direct current, is the type of electricity that is used to power many electronic devices. In order to...

    세부 정보보기
  • 2023-5-12

    How to convert AC to DC power 12V?

    Introduction Alternating current (AC) is a type of electrical current that flows back and forth in a circuit. Direct current (DC), on the other hand, flows in a single direction. While many household appliances and electronics run on DC, the power that comes out of a wall socket is AC. Therefore, to use these appliances and electronics, you need to convert AC to DC power. In this article, we will explain how to convert AC to DC power, specifically 12V DC. We will discuss the different types of AC to DC converters, step-by-step instructions on how to convert AC to DC power, and some safety tips to keep in mind while doing so. Types of AC to DC Converters There...

    세부 정보보기
  • 2023-6-30

    Bidirectional DC-DC Converter: A Versatile Solution for Efficient Power Flow

    Introduction: With the increasing demand for efficient power distribution and energy management in various applications such as renewable energy systems, electric vehicles, and microgrids, the bidirectional DC-DC converter has emerged as a versatile solution. This article aims to discuss the working principles, advantages, and applications of bidirectional DC-DC converters, highlighting their significance in achieving optimal power flow. 1. Working Principles: A bidirectional DC-DC converter is a power electronic device that enables the transfer of electrical energy between two DC voltage sources bidirectionally. It consists of two stages: step-up (boost) and step-down (buck) converters. The bidirectional flow of power is achieved by controlling the switching states of semiconductor devices, such as MOSFETs or IGBTs, in both stages. By regulating the voltage...

    세부 정보보기
  • 2023-8-8

    High quality 120V AC to 12V DC Converter manufacture

    Introduction: In today's modern world, electricity plays a pivotal role in powering various electronic devices and appliances. However, these devices often operate at different voltage levels, necessitating the use of converters to ensure compatibility. One such converter is the 120V AC to 12V DC converter. This article aims to provide a comprehensive understanding of the principles, functionality, and applications of this essential electrical device. Overview: The 120V AC to 12V DC converter, as the name suggests, is designed to convert alternating current (AC) with a voltage of 120 volts to direct current (DC) with a voltage of 12 volts. This conversion process is crucial for powering low-voltage devices that require a stable and reliable power source. The converter is often...

    세부 정보보기

6000개 이상의 옵션, 원스톱 전원 공급 장치 솔루션