ニュース
パワーモジュール選択の問題を解決する方法
著者： ZYGパワーモジュール Time： 2022-12-20
It is not easy to select a power module. There are many difficulties to consider. How much do you know?
Magnetic beads, capacitors, diodes, resistors… all have similar inside stories, but people don’t pay much attention to them. There are various topologies of power modules, such as flyback, forward, push-pull, half-bridge, and full-bridge. Due to their different basic principles, each of them is mainly manifested in the advantages at the level of certain characteristic indicators.
The flyback power supply does not have a time period for charging and discharging the battery during the power switch period. That is because there is no time characteristic of the response characteristic, and the grain baud cannot be guaranteed to be very good, although it may not help much according to the energy storage capacitor , but the rationale is just a flaw.
Leakage inductance is also a big problem, but its advantages are simple power supply circuit, low cost, light weight, no need to add magnetic calibration windings, and a wider operating voltage range for typing. Because of this, its share of the total power supply sales market is about 7%.
The output voltage of the positive power supply has good transient operation characteristics and strong load capacity, but its disadvantages are also obvious. The large energy storage technology is used to filter the inductor and the freewheeling diode, which is large in size, and the back electromotive force of the primary coil of the transformer is high. .
The push-pull power supply has high transient response time, good working voltage and frequency characteristics. It is the most utilized power transformer of all topologies. No flux leakage, simple optocoupler circuit.
If the two forward converters are not completely symmetrical or balanced, the bias magnetism accumulated after many cycles will cause the magnetic core to enter a saturated state, resulting in excessive excitation current of the high-frequency transformer, and even damage the power switch tube.
The accumulative chainless power supply transformer has a large power and high working efficiency, the withstand voltage test value of the power switch tube is relatively low, and the primary coil of the transformer only needs to be wound once. The disadvantage is that the efficiency is low, there is a semiconductor area, and the consumption is large.
The above problems are all caused by the inherent advantages and disadvantages of its topology. Although people can use the power module as the black box of the aircraft, this is also a point that needs to be paid attention to when choosing a power supply.
前： パワーモジュールの選び方と注意点、それぞれがとても重要
次： The Importance of Quality Control in China DC-DC Converter Manufacturing
関連情報
-
2023-11-14
Versatile Power Supply Module: Adjusting Voltage and Current for Diverse Applications
Introduction In today's technologically advanced world, a power supply module plays a crucial role in providing the necessary voltage and current for various electronic devices and applications. However, not all devices and applications have the same power requirements. To address this challenge, a versatile power supply module has been developed that allows for adjusting voltage and current according to the specific needs of diverse applications. Understanding the Versatile Power Supply Module The versatile power supply module is designed to offer flexibility and adaptability in meeting the power demands of different electronic systems. It incorporates advanced circuitry and components that enable precise adjustments to voltage and current values. With the ability to tailor the power output, this module becomes an indispensable...
詳細を見る -
2023-5-22
Efficient AC-DC Power Supply for Reliable and Consistent Performance
Introduction: An efficient AC-DC power supply is an essential component of any electronic device. It is responsible for converting the incoming AC voltage into a DC voltage that can be used by the device. The power supply must be reliable and consistent, providing a stable output voltage even under varying load conditions. In this article, we will explore the importance of an efficient AC-DC power supply and the factors that contribute to its reliability and consistent performance. Importance of an efficient AC-DC power supply: An efficient AC-DC power supply is crucial for the proper functioning of electronic devices. It ensures that the device receives a stable and regulated DC voltage, which is essential for its safe and reliable operation. Without...
詳細を見る -
2023-7-5
ZP Series: An AC DC Converter for Efficient Power Conversion
Introduction: In today's technologically advanced world, efficient power conversion plays a crucial role in various industries. The ZP Series AC DC converter is designed to meet the increasing demand for high-quality power conversion solutions. This article will delve into the features, benefits, and applications of the ZP Series, highlighting its importance in the modern power conversion landscape. Features of the ZP Series: 1. High Efficiency: The ZP Series is known for its exceptional energy efficiency, converting AC power to DC power with minimal loss. This efficiency not only reduces energy consumption but also helps in lowering operating costs. 2. Wide Input Voltage Range: The converter can adapt to a wide input voltage range, making it suitable for various applications and...
詳細を見る -
2023-4-22
When it comes to converting alternating current (AC) to direct current (DC), there are a few different methods that can be used. One of the most common methods is to use a power supply unit (PSU) that is specifically designed for this purpose. In this article, we will go over the basic steps for wiring an AC to DC power supply. Step 1: Choose your power supply The first step in wiring an AC to DC power supply is to choose the right unit for your needs. There are many different types of power supplies available, so you will need to consider a few factors when making your decision. One of the most important factors is the voltage and amperage...
詳細を見る -
2023-10-26
AC Power Supply Module: An Essential Component for Seamless Operation
Introduction: The smooth and uninterrupted operation of electronic devices is crucial for individuals and businesses alike. The AC power supply module plays a significant role in ensuring the seamless functioning of various appliances and systems. This article aims to explore the importance of AC power supply modules and their contribution to the efficient operation of electronic devices. 1. Understanding AC Power Supply Modules: An AC power supply module, also known as an alternating current power supply module, is a device that converts the alternating current (AC) from the main power supply into the direct current (DC) required for the operation of electronic devices. It provides a stable and regulated power output to ensure that the connected devices receive the necessary...
詳細を見る -
2023-6-8
AC DC Power Supply Module: The Essential Component for Reliable Electrical Performance
Power supply modules are an essential component for reliable electrical performance in various electronic devices. They provide a stable and regulated DC voltage output from an AC input source. The AC DC power supply module operates by converting the input AC voltage to a DC voltage. These modules are designed to provide a constant and reliable power supply to electronic devices, regardless of changes in the input voltage or load. The AC DC power supply module is used in a wide variety of applications, including industrial automation, medical electronics, telecommunications, and consumer electronics. These modules come in various shapes and sizes, ranging from small and compact to larger, industrial-grade models. The type of power supply module used depends on the...
詳細を見る