高品質のクリアランスと信頼できるパワー モジュール メーカーを選択するにはどうすればよいですか?
- ブログ - 会社のニュース - DC-DCパワーモジュールの重要性、構造、選び方について教えてください。

DC-DCパワーモジュールの重要性、構造、選び方について教えてください。

著者: ZYGパワーモジュール Time: 2022-4-7

With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.

The importance of DC-DC power module:

DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.

For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.

Power structure of DC-DC power module:

The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.

 

 

The selection of power modules should be based on the following four points:

1, the use of mature power supply topology

The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.

2, high efficiency within the full load range

High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.

3, limit temperature characteristics

The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.

 

 

4, high isolation, low isolation capacitance

Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.

 

関連情報

  • 2024-1-1

    AC Power Supply Module: Ensuring Efficient and Reliable Electrical Power

    In today's modern world, electrical power is the lifeblood of our daily lives. It powers our homes, workplaces, and industries, enabling us to use various appliances and devices. However, to ensure the efficient and reliable delivery of electrical power, an AC power supply module plays a crucial role. This article will explore the importance of AC power supply modules and how they contribute to the efficiency and reliability of electrical power. Efficiency of AC Power Supply Modules: AC power supply modules are designed to convert alternating current (AC) into low-voltage direct current (DC) power, which is suitable for powering electronic devices. One of the key factors determining the efficiency of these modules is their power conversion efficiency. This refers to...

    詳細を見る
  • 2023-5-30

    Bidirectional DC DC Converter: A Comprehensive Overview

    A bidirectional DC DC converter is a power electronic device that can convert DC power from one voltage level to another in both directions. It has the capability to transfer power bidirectionally between two DC sources, such as batteries, capacitors, or fuel cells, with different voltage levels. This converter is widely used in various applications, such as electric vehicles, renewable energy systems, and energy storage systems, due to its high efficiency, compact size, and low cost. The basic structure of a bidirectional DC DC converter consists of two power switches (MOSFET or IGBT), two diodes, and an inductor. The switches are controlled by a pulse-width modulation (PWM) signal to regulate the output voltage and current. The diodes are used to...

    詳細を見る
  • 2023-5-23

    Efficient AC-DC Power Supply for Maximum Performance and Reliability

    Introduction In today's world, electronic devices are used more often than ever before. These devices require power to operate, and this power must be supplied in a safe, reliable, and efficient manner. The AC-DC power supply is an essential component that converts the incoming AC voltage to DC voltage, which is used by electronic devices. An efficient AC-DC power supply is necessary to ensure maximum performance and reliability of electronic devices. In this article, we will discuss the importance of an efficient AC-DC power supply and how it can be achieved. Importance of Efficient AC-DC Power Supply Efficiency is an essential factor when it comes to power supplies. An efficient AC-DC power supply is necessary to minimize energy waste and...

    詳細を見る
  • 2023-4-17

    AC-DCコンバーター:交流を直流に変換

    AC-DC converters are electronic devices that convert alternating current (AC) to direct current (DC). They are commonly used in power supplies for electronic devices, such as computers, televisions, and mobile phones. The converter changes the AC input voltage to a DC output voltage that can be used to power these devices. The AC-DC converter operates by rectifying the AC input voltage to a pulsating DC voltage. This is achieved using a rectifier, which is typically a diode bridge. The rectifier allows current to flow in only one direction, effectively converting the AC voltage to a series of positive and negative voltage pulses. After rectification, the DC voltage still contains some ripple, or fluctuations in voltage. To remove this ripple, a...

    詳細を見る
  • 2023-7-23

    Efficient AC to DC Converter for LED Lights: 12V Solution

    Introduction LED lights have gained popularity in recent years due to their energy efficiency, long lifespan, and versatility in design. However, one of the challenges in using LED lights is converting the alternating current (AC) from the power grid into direct current (DC) required by the LED lights. In this article, we will explore an efficient AC to DC converter solution for LED lights, specifically focusing on a 12V system. Background LED lights operate on DC power, which is different from the AC power supply available in most households. Therefore, an AC to DC converter is needed to ensure the proper functioning of LED lights. The converter's primary function is to convert the AC voltage into a stable and regulated...

    詳細を見る
  • 2023-12-8

    Module Power Supply: Ensuring Efficient and Reliable Power for Your Devices

    In today's fast-paced and technology-driven world, the demand for efficient and reliable power supply has never been greater. From smartphones and laptops to household appliances and industrial equipment, all modern devices require a stable and uninterrupted power source to function optimally. This is where module power supply comes into play. In this article, we will explore the importance of module power supply in ensuring efficient and reliable power for your devices. What is Module Power Supply? A module power supply, also known as a power module or a power converter, is an electronic device that converts electrical energy from one form to another and delivers it to various components of a device. It takes the input voltage from a power...

    詳細を見る

6000 以上のオプション、ワンストップの電源ソリューション