news
Quando scegliere un produttore di alimentatori AC-DC e quali sono i vantaggi di scegliere un alimentatore AC-DC
Author： ZYG Power Module Time： 2022-9-14
AC DC Power Module Filling Requirements
Potting and sealing of AC DC power modules is very important. This process involves not only the protection of AC and DC power modules (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also the thermal design of AC and DC power modules.
Power module potting materials are generally divided into three categories: epoxy resin, polyurethane, and silicone rubber
Due to the hardness of epoxy resin, it cannot be used for stress-sensitive and module packaging and SMT components, so it is basically eliminated in module power supplies. But epoxy resins are also used in cost-critical micropower power supplies due to their low cost. Some domestic bad power supply manufacturers also use this epoxy resin for AC and DC power supply modules, but due to stress problems, the failure rate of this power supply is very high, and buyers are very distressed.
At present, most of the power modules are sealed with molded silicone. For the convenience of operation, the ratio of 1:1 is usually adopted. When designing for AC and DC power modules, attention should be paid to their thermal conductivity. However, the adhesion is not very strong, so a substrate coating can be used to improve sealing.
Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price of silicone rubber, polyurethane is not cost-effective. There is basically no domestic application of it.
Special attention should be paid to thermal conductivity in relation to thermal design. Generally speaking, a thermal conductivity of 0.5w/M·K is defined as high thermal conductivity, and a thermal conductivity greater than 1 is defined as very high thermal conductivity.
The power module is such a highly integrated small and medium-sized switching power supply. In recent years, with the development trend of high and new technology, it has been widely used in industrial electrical, power supply system, instrumentation, urban rail, intelligent security, new energy technology, communication, automation technology and intelligent system industry.
Make sure to type the source type first
The power module can input AC current or AC current. Normally, the FH/DC power module selects AC current input, and the DC/DC power module selects AC input. The high-cubic FH-DC power module can also be used normally under the DC input working voltage standard.
Type in the operating voltage category to select
After confirming the input source, the input working voltage can refer to the manufacturer’s motor selection structure. The communication keys are basically 120V, 230V, 220V. Now FH/DC power modules usually consider 86~265VAC or 150~370VDC types, and 220V also consider 230V types, but the probability of application at 230V will be much worse, and the DC keys are basically 5V~76V.
Select the package type of the item
Product package types include single in-line SIP package, small and medium vertical bare board, dual in-line ultra-small DIP package and rail package. The bare board is composed of a PCB circuit board and various components. It is completely exposed and not very safe, but the cost is low.
DIP packaging is usually strongly recommended. Although it is expensive to lose, it has the characteristics of potting packaging, safety protection, good heat dissipation characteristics of heat pipes, anti-freezing, moisture-proof and stable characteristics. must be selected on a case-by-case basis.
Select the output power of the goods according to the load size
When selecting the output power of the power module, it is usually strongly recommended to reserve the capacity, and the output power of the application is between 30 and 90% of the actual output power. The capacity is large and there are noise problems when working at high frequencies.
informazioni rilevanti
-
2023-4-27
AC-DC Converter Module: Efficient Power Conversion Solution
AC-DC converter modules are electronic devices that are used to convert alternating current (AC) to direct current (DC). They are widely used in various applications such as power supplies, battery chargers, and LED lighting systems. These modules offer an efficient power conversion solution for many different industries.One of the key benefits of using an AC-DC converter module is that it can help to improve the efficiency of power conversion. By using a module that is specifically designed for the task at hand, less energy is lost during the conversion process. This means that less power is needed to achieve the same level of output, which can ultimately lead to cost savings and a more sustainable approach to energy usage.Another advantage...
Visualizza dettagli -
2023-4-14
Transforming Power: The AC-DC Converter
Power is an essential component of modern life, powering everything from the devices we use in our homes to the machinery used in factories. However, the form in which we receive power from the grid is alternating current (AC), while many of the electronic devices we use require direct current (DC). In order to convert AC power to DC power, we use AC-DC converters. AC power is generated by power plants in the form of a sine wave, with a frequency of 50 or 60 Hz, depending on the region. This AC power is then transmitted through power lines to reach households and businesses. However, many electronic devices require a steady DC voltage to operate. This is where AC-DC converters...
Visualizza dettagli -
2023-6-29
24V AC to DC Converter: Efficiently Powering Your Devices with Ease
Introduction: In today's modern world, electronic devices have become an integral part of our lives. From smartphones to laptops, we rely on these devices for communication, work, and entertainment. However, these devices require a stable and efficient power source to function properly. This is where the 24V AC to DC converter comes into play. In this article, we will explore the benefits and applications of this converter, and how it efficiently powers your devices with ease. What is a 24V AC to DC Converter? A 24V AC to DC converter is a device that converts alternating current (AC) into direct current (DC) with an output voltage of 24 volts. It is primarily used to power electronic devices that require a...
Visualizza dettagli -
2023-5-11
China 240V AC to 12V DC Converter – Efficiently Power Your Devices
A 240V AC to 12V DC converter is an essential device for anyone who needs to power their electronic devices efficiently. This converter allows you to convert the high voltage from your outlet to a lower voltage that is suitable for your device. One of the main benefits of using a converter is that it can help save energy. By converting the voltage from 240V AC to 12V DC, you can reduce the amount of power that is wasted as heat. This means that your devices will run more efficiently and you will save money on your electricity bill. Another advantage of using a converter is that it can help to extend the life of your electronic devices. Many devices...
Visualizza dettagli -
2023-5-9
Efficient Industrial AC-DC Converter for Reliable Power Conversion
Introduction In modern industrial applications, efficient power conversion is essential in ensuring reliable and continuous performance of different systems. AC-DC converters are commonly used in industrial power systems to convert AC power to DC power, which is then used to drive various loads. However, conventional AC-DC converters are quite inefficient, leading to significant losses and energy wastage. This paper presents an efficient industrial AC-DC converter that is designed to offer reliable power conversion for various industrial applications. Efficient Industrial AC-DC Converter Design The efficient industrial AC-DC converter is designed based on the flyback topology, which is known for its high efficiency and simplicity. The converter is designed to operate in continuous conduction mode (CCM) to eliminate the reverse recovery losses...
Visualizza dettagli -
2023-5-15
An AC-DC converter for cars is a device that converts the alternating current (AC) from a car's electrical system into direct current (DC) that is suitable for powering electronic devices. Most modern cars have an AC electrical system designed to power the car's battery and accessories, such as the headlights, radio, and air conditioning system. However, electronic devices, such as mobile phones, tablets, and laptops, typically require a DC power source. The AC-DC converter for cars works by taking the AC voltage from the car's electrical system and converting it into a DC voltage that is suitable for powering electronic devices. The converter typically consists of a rectifier, a filter, and a voltage regulator. The rectifier converts the AC voltage...
Visualizza dettagli