news
Circa l'importanza, la struttura e come scegliere il modulo di alimentazione DC-DC?
Author： ZYG Power Module Time： 2022-4-7
With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.
The importance of DC-DC power module:
DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.
For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.
Power structure of DC-DC power module:
The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.
The selection of power modules should be based on the following four points:
1, the use of mature power supply topology
The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.
2, high efficiency within the full load range
High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.
3, limit temperature characteristics
The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.
4, high isolation, low isolation capacitance
Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.
informazioni rilevanti
-
2023-7-4
AC-DC Power Supply: Providing Efficient and Reliable Electrical Power
Introduction: In today's world, where electricity is the backbone of almost every industry and household, the importance of efficient and reliable power supply cannot be overstated. One crucial component that plays a significant role in ensuring uninterrupted electrical power is the AC-DC power supply. This article aims to explore the functionalities and benefits of AC-DC power supplies, highlighting their efficiency and reliability in various applications. AC-DC Power Supply: The Fundamentals: An AC-DC power supply is an electrical device that converts alternating current (AC) input voltage into direct current (DC) output voltage. It acts as an intermediary between the main power source and the electronic devices it powers. The power supply unit consists of several components, including transformers, rectifiers, filters, and...
Visualizza dettagli -
2023-10-13
Fully Modular Power Supply: The Ultimate Solution for Cable Management
Introduction In today's technology-driven world, cable management has become crucial for maintaining a clean and organized setup. One of the key components in achieving this is a fully modular power supply. It offers a solution to the tangled mess of cables that plagues many computer enthusiasts. This article will explore the advantages of a fully modular power supply and why it is the ultimate solution for cable management. What is a Fully Modular Power Supply? Before diving into the benefits, let's understand what a fully modular power supply is. Unlike traditional power supplies, which come with a fixed set of cables, a fully modular power supply allows users to detach and attach cables as needed. This feature offers flexibility and...
Visualizza dettagli -
2023-6-28
The Electrifying Power Series: A Revolution in Sustainable Energy
The world is facing a massive energy crisis. Non-renewable resources such as coal, oil, and gas are running out, and the demand for energy is only increasing. In recent years, there has been a growing interest in sustainable energy, and this has led to the development of new technologies that can harness renewable sources of energy. One such technology is the Electrifying Power Series, a revolutionary new approach to sustainable energy. The Electrifying Power Series is a series of power plants that use renewable sources of energy such as wind, solar, and hydro power to generate electricity. These power plants are designed to be highly efficient, with minimal waste and emissions. They are also designed to be modular, so that...
Visualizza dettagli -
2023-6-26
24V AC to DC Converter: Efficiently Transforming Alternating Current to Direct Current
In many electrical systems, it is necessary to convert alternating current (AC) to direct current (DC). This is particularly true in applications such as automotive electronics, where a steady voltage supply is required for powering various electrical components. One of the most commonly used devices for converting AC to DC is the 24V AC to DC converter. The 24V AC to DC converter is a device that transforms the incoming AC voltage into a steady DC voltage output. This conversion can be achieved through a number of different techniques, including rectification, smoothing, and filtering. The first step in the conversion process is rectification, which involves converting the AC voltage into a pulsating DC voltage. This is done using a diode...
Visualizza dettagli -
2023-6-4
AC-DC Power Supply: Ensuring Reliable and Efficient Electrical Current Conversion
An AC-DC power supply is an electrical device that converts alternating current (AC) into direct current (DC). AC-DC power supplies are commonly used in a variety of applications, such as in electronic devices, telecommunications equipment, industrial automation, and many others. They are essential in ensuring that electrical devices receive a stable and reliable power source. The conversion of AC to DC is necessary because most electrical devices and equipment operate on DC. The AC power that is supplied from mains power sources is at a higher voltage and frequency than the DC required by electronic devices. AC-DC power supplies are designed to provide a stable DC voltage output that is suitable for powering electronic devices. A reliable AC-DC power supply...
Visualizza dettagli -
2023-4-24
How to Build an AC-DC Power Supply
Introduction An AC-DC power supply is an essential component in many electronic devices, providing a constant and reliable source of power. These power supplies can be used in a wide range of applications, from powering small electronic devices like smartphones to larger appliances like refrigerators and air conditioners. Building one of these devices is a relatively simple process, and can be done with some basic knowledge of electronics and a few common components. Step 1: Choose the Transformer The first step in building an AC-DC power supply is to choose an appropriate transformer. The transformer will convert the AC voltage from the wall outlet into a lower voltage that can be used by the power supply. The voltage needed will...
Visualizza dettagli