նորություններ
Կարևորության, կառուցվածքի և ինչպես ընտրել DC-DC հոսանքի մոդուլը:
Հեղինակ՝ ZYG Power Module Time： 2022-4-7
With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.
The importance of DC-DC power module:
DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.
For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.
Power structure of DC-DC power module:
The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.
The selection of power modules should be based on the following four points:
1, the use of mature power supply topology
The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.
2, high efficiency within the full load range
High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.
3, limit temperature characteristics
The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.
4, high isolation, low isolation capacitance
Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.
Նախորդը: Ինչպե՞ս ընտրել որակյալ մաքսազերծում և հզորության մոդուլների հուսալի արտադրողներ:
Հաջորդ: Ինչ է մոդուլի հզորության ռեժիմը
համապատասխան տեղեկատվություն
-
2023-5-15
An AC-DC converter for cars is a device that converts the alternating current (AC) from a car's electrical system into direct current (DC) that is suitable for powering electronic devices. Most modern cars have an AC electrical system designed to power the car's battery and accessories, such as the headlights, radio, and air conditioning system. However, electronic devices, such as mobile phones, tablets, and laptops, typically require a DC power source. The AC-DC converter for cars works by taking the AC voltage from the car's electrical system and converting it into a DC voltage that is suitable for powering electronic devices. The converter typically consists of a rectifier, a filter, and a voltage regulator. The rectifier converts the AC voltage...
Մանրամասնորեն -
2023-7-10
120V AC to 12V DC Converter: Efficient Power Conversion for Your Devices
Introduction In today's technologically advanced world, the need for efficient power conversion has become increasingly important. Many of our electronic devices require Direct Current (DC) to function properly, while the standard power supply in most households provides Alternating Current (AC) at 120 volts. To bridge this gap and enable the safe and efficient operation of our devices, the 120V AC to 12V DC converter plays a crucial role. This article will delve into the details of this converter, its benefits, and its applications. What is a 120V AC to 12V DC Converter? A 120V AC to 12V DC converter is an electronic device that transforms the high voltage Alternating Current from the main power supply into low voltage Direct Current...
Մանրամասնորեն -
2023-8-23
Introducing the SP Series AC-DC Converter: Efficient Power Conversion Solutions
In today's rapidly advancing technological landscape, the demand for efficient power conversion solutions has never been higher. As the world becomes increasingly reliant on electronic devices, it is crucial to have reliable and energy-efficient power converters to meet these growing needs. That is where the SP Series AC-DC Converter comes into play. The SP Series AC-DC Converter is a cutting-edge power conversion solution designed to deliver high performance and energy efficiency. With its innovative features and advanced technology, it has become the go-to choice for many industries, including telecommunications, industrial automation, renewable energy, and more. One of the key features of the SP Series is its high efficiency. By utilizing the latest power conversion technologies, this converter achieves an impressive...
Մանրամասնորեն -
2023-5-4
Designing an AC-DC Converter Circuit
Introduction An AC-DC converter is a circuit that transforms AC (alternating current) power into DC (direct current) power. This is a necessary function in many electronic devices that require a steady and reliable source of DC power. In this article, we will discuss the design of an AC-DC converter circuit. Design considerations When designing an AC-DC converter circuit, there are several important considerations that need to be taken into account. These include the input voltage, output voltage and current, efficiency, and cost. Additionally, the type of load the converter will be powering must also be considered, as some loads may require a more stable output voltage than others. Input voltage The input voltage of the AC-DC converter circuit will depend...
Մանրամասնորեն -
2023-6-13
Efficient AC DC Power Supply with PFC Technology
Power supply technology has come a long way since the early days of electronics. One of the biggest advancements in power supply technology has been the development of Power Factor Correction (PFC) technology. PFC technology has revolutionized the way that power is delivered to electronic devices, making power supplies more efficient, reliable, and cost-effective. In this article, we will discuss how PFC technology works and how it has improved the efficiency of AC DC power supplies. What is PFC Technology? Power Factor Correction technology is a method of correcting the power factor in an AC circuit. The power factor is a ratio of the real power (watts) to the apparent power (volt-amperes) of a circuit, and it indicates how efficient...
Մանրամասնորեն -
2023-10-19
AC/DC Power Supply Module: A Reliable Solution for Stable Power Output
Introduction: In today's technologically advanced world, power supply plays a crucial role in ensuring the smooth functioning of various electronic devices. From smartphones to computers, every device requires a stable power supply to operate efficiently. One such reliable solution for stable power output is the AC/DC Power Supply Module. This article will delve into the features, benefits, and applications of this module, highlighting why it is an ideal choice for various industries. Features of AC/DC Power Supply Module: 1. Stable Power Output: The AC/DC Power Supply Module is designed to deliver a stable power output, ensuring that electronic devices receive the required voltage without any fluctuations. This stability prevents damage to sensitive components and ensures consistent performance. 2. Wide Input...
Մանրամասնորեն