albisteak
Garrantziari, egiturari eta nola aukeratu DC-DC potentzia modulua?
Egilea: ZYG Power Module Time： 2022-4-7
With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.
The importance of DC-DC power module:
DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.
For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.
Power structure of DC-DC power module:
The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.
The selection of power modules should be based on the following four points:
1, the use of mature power supply topology
The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.
2, high efficiency within the full load range
High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.
3, limit temperature characteristics
The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.
4, high isolation, low isolation capacitance
Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.
Aurrekoa: Nola aukeratu kalitatezko sakea eta potentzia-moduluaren fabrikatzaile fidagarriak?
Hurrengoa: Zein da moduluaren potentzia modua
informazio garrantzitsua
-
2023-4-17
AC-DC Converter: Transforming Alternating Current to Direct Current
An AC-DC converter, also known as a rectifier, is an electronic device that is used to transform alternating current (AC) into direct current (DC). This process is essential in many applications where DC voltage is required, such as in electronic devices and power supplies. The conversion process involves a diode bridge rectifier that allows the AC current to pass through in only one direction, effectively converting it into DC voltage. This rectifier is made up of four diodes that are arranged in a specific pattern to create a bridge circuit. During the positive half-cycle of the AC voltage, one pair of diodes conducts and allows the current to flow through them, while the other pair of diodes is reverse-biased and...
Ikusi xehetasunak -
2023-6-8
How to Convert 110V AC to 12 Volt DC?
Converting 110V AC to 12 Volt DC can be a bit tricky, especially if you're not familiar with electrical work. But with the right tools and knowledge, it can be done safely and efficiently. In this article, we'll take a closer look at the steps involved in converting 110V AC to 12 Volt DC. Step 1: Understand the Basics Before you even begin the process of converting 110V AC to 12 Volt DC, it's important to have a basic understanding of how electricity works. AC, or alternating current, is the type of electricity that comes out of your wall outlets. DC, or direct current, is the type of electricity that is used to power many electronic devices. In order to...
Ikusi xehetasunak -
2023-9-23
DC to DC Power Supply Module: Efficient and Reliable Power Conversion Solution
DC to DC Power Supply Module: Efficient and Reliable Power Conversion SolutionIntroduction:In today\'s technologically advanced world, power conversion plays a crucial role in various applications, ranging from consumer electronics to industrial equipment. The DC to DC power supply module is an essential component that converts one DC voltage level to another, providing a reliable and efficient power conversion solution. This article aims to explore the features, advantages, and applications of the DC to DC power supply module.Features of DC to DC Power Supply Module:1. Wide Input and Output Voltage Range:The DC to DC power supply module is designed to accommodate a wide range of input and output voltage levels. This flexibility allows it to be used in various applications where...
Ikusi xehetasunak -
2023-8-11
AC DC Converter SP Series supplier: Superior Performance and Reliability
Introduction In today's fast-paced world, reliable and efficient power supply is crucial for the seamless operation of various electronic devices. AC DC converters play a vital role in converting alternating current (AC) to direct current (DC), ensuring a stable and consistent power supply. One such remarkable converter series is the SP series, known for its superior performance and reliability. This article will delve into the features and benefits of the AC DC Converter SP series, highlighting its importance in modern technology. Overview of the SP Series The SP series AC DC converters are high-performance power supplies designed to meet the growing demands of various applications, ranging from industrial automation to telecommunications and transportation. These converters convert AC power from the...
Ikusi xehetasunak -
2023-8-30
The Electric Power Series: Energizing English Learning
As the world becomes increasingly globalized, the ability to communicate in English has become more important than ever. English is not only the universal language of business, but it also plays a crucial role in academic and social settings. In response to this growing demand, a revolutionary language-learning program called The Electric Power Series has been introduced to energize and enhance English learning. The Electric Power Series is a comprehensive and interactive English language program designed to cater to learners of all ages and levels. It focuses on optimizing language acquisition through the use of cutting-edge technology and innovative teaching methodologies. By incorporating elements of gamification, multimedia, and real-life scenarios, this program aims to make English learning engaging, meaningful, and...
Ikusi xehetasunak -
2023-6-7
Power Up with the HP Series AC DC Converter
In today's fast-paced world, time is of the essence. We rely on technology to make our lives easier and more efficient. However, the devices we use require a steady flow of power to function properly. This is where the HP Series AC DC Converter comes into play. The HP Series AC DC Converter is a versatile power supply that can convert AC power to DC power, providing a reliable source of power for a variety of devices. Whether you're using a laptop, a printer, or a gaming console, the HP Series AC DC Converter can help you power up and stay connected. One of the key advantages of the HP Series AC DC Converter is its compact size. The converter...
Ikusi xehetasunak