noticias
Cuándo elegir un fabricante de fuente de alimentación AC-DC y cuáles son los beneficios de elegir una fuente de alimentación AC-DC
Autor： Módulo de potencia ZYG Time： 2022-9-14
AC DC Power Module Filling Requirements
Potting and sealing of AC DC power modules is very important. This process involves not only the protection of AC and DC power modules (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also the thermal design of AC and DC power modules.
Power module potting materials are generally divided into three categories: epoxy resin, polyurethane, and silicone rubber
Due to the hardness of epoxy resin, it cannot be used for stress-sensitive and module packaging and SMT components, so it is basically eliminated in module power supplies. But epoxy resins are also used in cost-critical micropower power supplies due to their low cost. Some domestic bad power supply manufacturers also use this epoxy resin for AC and DC power supply modules, but due to stress problems, the failure rate of this power supply is very high, and buyers are very distressed.
At present, most of the power modules are sealed with molded silicone. For the convenience of operation, the ratio of 1:1 is usually adopted. When designing for AC and DC power modules, attention should be paid to their thermal conductivity. However, the adhesion is not very strong, so a substrate coating can be used to improve sealing.
Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price of silicone rubber, polyurethane is not cost-effective. There is basically no domestic application of it.
Special attention should be paid to thermal conductivity in relation to thermal design. Generally speaking, a thermal conductivity of 0.5w/M·K is defined as high thermal conductivity, and a thermal conductivity greater than 1 is defined as very high thermal conductivity.
The power module is such a highly integrated small and medium-sized switching power supply. In recent years, with the development trend of high and new technology, it has been widely used in industrial electrical, power supply system, instrumentation, urban rail, intelligent security, new energy technology, communication, automation technology and intelligent system industry.
Make sure to type the source type first
The power module can input AC current or AC current. Normally, the FH/DC power module selects AC current input, and the DC/DC power module selects AC input. The high-cubic FH-DC power module can also be used normally under the DC input working voltage standard.
Type in the operating voltage category to select
After confirming the input source, the input working voltage can refer to the manufacturer’s motor selection structure. The communication keys are basically 120V, 230V, 220V. Now FH/DC power modules usually consider 86~265VAC or 150~370VDC types, and 220V also consider 230V types, but the probability of application at 230V will be much worse, and the DC keys are basically 5V~76V.
Select the package type of the item
Product package types include single in-line SIP package, small and medium vertical bare board, dual in-line ultra-small DIP package and rail package. The bare board is composed of a PCB circuit board and various components. It is completely exposed and not very safe, but the cost is low.
DIP packaging is usually strongly recommended. Although it is expensive to lose, it has the characteristics of potting packaging, safety protection, good heat dissipation characteristics of heat pipes, anti-freezing, moisture-proof and stable characteristics. must be selected on a case-by-case basis.
Select the output power of the goods according to the load size
When selecting the output power of the power module, it is usually strongly recommended to reserve the capacity, and the output power of the application is between 30 and 90% of the actual output power. The capacity is large and there are noise problems when working at high frequencies.
Anterior: Cómo personalizar su fuente de alimentación AC-DC de China según sus necesidades específicas
Próximo: Cómo elegir la fábrica del convertidor DC-DC, cómo elegir el convertidor DC-DC de alta calidad
informacion relevante
-
2023-6-14
Car AC-DC Converter: Power Your Devices on the Go!
In today's modern world, our reliance on electronic devices has increased significantly. Whether it is a smartphone, tablet, or laptop, we need to stay connected to these devices at all times. This becomes especially important when we are on the go, traveling in a car. However, in a vehicle, the power supply for these devices is limited. Fortunately, with the help of a car AC-DC converter, we can power our devices on the go. A car AC-DC converter is a device that helps to convert the DC power supply of a car into AC power, which can be used to charge our electronic devices. The converter plugs into the cigarette lighter or the power outlet of a car and provides...
Ver detalles -
2022-5-16
¿Cómo garantizar la seguridad de cambiar la fuente de alimentación cuando se trata de fallas?
¿Sabe a qué problemas se debe prestar atención en el proceso de lidiar con fallas? Para mantener a todos a salvo. (1) la mayor parte del tiempo en el proceso de procesamiento de fallas, el funcionamiento real de la potencia de inducción, por lo que debemos prestar atención a que no puede causar salida de CC, cortocircuito de entrada de CA de comunicación, todo tipo de herramientas especiales de mantenimiento deben hacer un buen trabajo de capa de aislamiento Tratamiento, para garantizar la seguridad de la vida y cambiar la seguridad de la fuente de alimentación del equipo de la máquina de suministro de energía. (2) en la operación real a la operación con una sola mano en la medida de lo posible, la mano de operación real no permite contener decoraciones de conductores eléctricos de material metálico, como relojes, llaves, anillos, etc., junto con los zapatos de aislamiento para. ..
Ver detalles -
2023-6-17
Car Outlet Converter: The Ultimate Solution for Powering Your Devices on the Go
In today's fast-paced world, staying connected is more important than ever. Whether you're on a road trip or simply commuting to work, having access to power for your devices is essential. This is where a car outlet converter comes in handy. A car outlet converter is a device that allows you to plug in and power your electronic devices while on the go. With a car outlet converter, you can charge your phone, tablet, laptop, or any other device that requires power. This makes it an essential tool for anyone who spends a lot of time in their car. One of the biggest advantages of a car outlet converter is that it provides a constant power source. This means that...
Ver detalles -
2023-8-22
Efficient AC to DC Converter for LED Lighting: 12V Solution
Introduction In recent years, there has been a significant shift towards using LED lighting solutions due to their energy efficiency and long lifespan. However, one of the challenges in utilizing LED lighting is the need for an efficient AC to DC converter. This article will explore a 12V solution for converting AC power to DC to drive LED lighting efficiently. Importance of an Efficient AC to DC Converter LED lighting relies on direct current (DC) power to function, while the power supplied to our homes and buildings is alternating current (AC). Therefore, an AC to DC converter is necessary to convert the incoming AC power to the appropriate DC voltage required by the LED lighting. An efficient AC to DC...
Ver detalles -
2023-5-11
Waterproof 12V AC to DC Converter
Introduction: The Waterproof 12V AC to DC Converter is a device that converts Alternating Current (AC) power to Direct Current (DC) power. This device is designed to provide a waterproof solution for outdoor and marine applications. It is an essential component for operating DC-powered devices that require a reliable and stable power source. Features: The Waterproof 12V AC to DC Converter is equipped with a range of features that make it a reliable and efficient power source. These features include: 1. Waterproof design: The device is encased in a waterproof housing that protects it from water damage. 2. Wide input voltage range: The device can operate on an input voltage range of 85V to 265V AC, making it suitable for...
Ver detalles -
2023-6-12
AC-DC Power Supply: Understanding the Basics
An AC-DC power supply is a device that converts alternating current (AC) to direct current (DC) to power electronic devices. It is an essential component of many electronic systems, including computers, televisions, and home appliances. The Basics of AC-DC Power Supply An AC-DC power supply typically consists of four main components: a transformer, a rectifier, a filter, and a regulator. The transformer is the first component, and it is responsible for converting the AC voltage to a lower voltage. The rectifier then converts this lower voltage AC into a DC voltage. The DC voltage output by the rectifier still contains a significant amount of ripple, which can cause damage to electronic devices. The filter is therefore used to remove this...
Ver detalles