About Small size power module suppliers

Due to technological advancements in many areas, more and more suppliers are offering power modules. Now is the time to take advantage of a new generation of power modules.

The need for higher density circuit boards and reduced system size has driven the need for smaller DC/DC solutions, which has led to the development of power modules.

Power modules are used in power conversion equipment such as industrial motor drives, embedded motor drives, uninterruptible power supplies, AC-DC power supplies, and welder power supplies.

Power modules integrate most of the components required for a power supply (synchronous switching regulator ICs, inductors, resistors, and capacitors) into a compact package. The result is an efficient and compact fully integrated solution that meets EMI requirements and keeps power supply design as simple as possible. Designers can move between modules and ICs as needed to trade off cost, size, and ease of use.

 

aprende más
Small size power module suppliers
Small size power module suppliers
Convertidor CA-CC
Convertidor CC-CC
Fuente de alimentación CA-CC
Fuente de alimentación especial
Fuente de alimentación CC-CC
SOLICITUD
más reciente blogs
ver más
Bidirectional DC DC Converter: A Two-Way Power Transfer Solution

2023-6-12

A bidirectional DC-DC converter is a power transfer solution that allows for two-way power conversion between two different voltage levels. This type of converter is commonly used in applications where power needs to be transferred bidirectionally, such as in electric vehicles, renewable energy systems, and battery charging systems. The bidirectional DC-DC converter is a device that converts power from a high voltage level to a low voltage level, or vice versa, depending on the direction of power flow. This is achieved by using a combination of power switches, inductors, capacitors, and control circuitry. The converter operates in two modes: buck mode and boost mode. In buck mode, the converter steps down the voltage from the high voltage level to the low voltage level. In boost mode, the converter steps up the voltage from the low voltage level to the high voltage level. The direction of power flow determines which mode the converter operates in. The bidirectional DC-DC converter has several advantages over other power transfer solutions. One of the main advantages is its efficiency. The converter is designed to minimize power losses and maximize power transfer efficiency, which results in less energy wasted and more energy transferred between the two...
AC to DC Converter Module for 12V Power Supply

2023-6-15

An AC to DC Converter Module for 12V Power Supply is an important component for electrical systems that require a stable and reliable power supply. In this article, we will explore what an AC to DC Converter Module is, how it works, its applications, and some factors to consider when choosing the right module for your specific needs. What is an AC to DC Converter Module for 12V Power Supply? An AC to DC Converter Module is a device that converts alternating current (AC) to direct current (DC). The module is designed to take an input of AC power, such as from a wall outlet, and convert it to a stable and reliable DC output. The 12V output is common in many applications, such as LED lighting, automotive electronics, and industrial equipment. How Does an AC to DC Converter Module Work? The AC to DC Converter Module works by using a transformer to step down the voltage from the input AC power source. The transformer is designed to match the input voltage and current to the required output voltage and current. After the transformer, a rectifier circuit is used to convert the AC power to DC power. The rectifier circuit...
Industrial AC-DC Converter for Reliable Power Conversion

2023-5-8

An industrial AC-DC converter is an essential component in many industrial applications where reliable power conversion is required. These converters are designed to convert AC power into DC power that can be used to power a wide range of industrial equipment and machinery. The use of an industrial AC-DC converter ensures that the power supply is stable and reliable, ensuring that the industrial equipment operates efficiently and effectively. In many industrial applications, the power supply can be unstable, and this can cause a range of problems. For example, if the voltage fluctuates, it can cause the equipment to malfunction or even fail completely. This can result in costly downtime and repairs, which can negatively impact the productivity and profitability of the industrial operation. By using an industrial AC-DC converter, the power supply is stabilized, ensuring that the equipment operates at a consistent level, reducing the risk of equipment failure. Industrial AC-DC converters come in a range of sizes and configurations, depending on the specific requirements of the industrial application. Some converters are designed for use in harsh environments, such as those found in mining or oil and gas operations. These converters are often rugged and durable, able to withstand extreme...
AC to DC Converter Module – 12V Output

2023-6-19

Introduction The AC to DC Converter Module is an electronic device used to convert alternating current (AC) to direct current (DC). This module is designed to provide a 12V output that can be used for various purposes. In this article, we will discuss the working principle, applications, and benefits of this module. Working Principle The AC to DC Converter Module consists of a step-down transformer, a rectifier, and a filter capacitor. The AC voltage is first stepped down by the transformer and then rectified by the diodes in the rectifier. The rectified voltage is then filtered by the capacitor to remove any ripples and provide a smooth DC output. The output voltage can be adjusted by changing the turns ratio of the transformer or by using a voltage regulator. Applications The AC to DC Converter Module is used in various electronic devices, such as power supplies, battery chargers, LED drivers, and motor controllers. It is also used in automotive and marine applications to convert the AC voltage from the alternator to DC voltage for charging the battery and powering the electrical systems. This module can be used in DIY projects, robotics, and hobbyist applications that require a stable and regulated...
AC DC Converter ZP Series

2023-6-7

The AC DC Converter ZP Series is a highly efficient and reliable power supply solution for a wide range of applications. With its advanced design and innovative features, the ZP Series is capable of delivering high-quality power with minimal energy loss. One of the key advantages of the ZP series is its ability to convert AC power into DC power with extremely high efficiency. This is achieved through the use of advanced circuitry and power management techniques, which ensure that the power supply operates at maximum efficiency at all times. As a result, the ZP series is able to deliver more power with less energy consumption, making it an ideal choice for energy-conscious applications. Another important feature of the ZP series is its high level of reliability. The power supply is designed to operate under a wide range of environmental conditions, including high temperatures and humidity levels. It also includes numerous built-in safety features, such as overvoltage and overcurrent protection, to ensure that the power supply remains stable and secure at all times. The ZP series is available in a range of output voltages and power ratings, making it suitable for a wide variety of applications. It is commonly used...
Cómo conectar una fuente de alimentación de CA a CC

2023-4-22

When it comes to converting alternating current (AC) to direct current (DC), there are a few different methods that can be used. One of the most common methods is to use a power supply unit (PSU) that is specifically designed for this purpose. In this article, we will go over the basic steps for wiring an AC to DC power supply. Step 1: Choose your power supply The first step in wiring an AC to DC power supply is to choose the right unit for your needs. There are many different types of power supplies available, so you will need to consider a few factors when making your decision. One of the most important factors is the voltage and amperage rating of the power supply. You will need to choose a power supply that can provide the correct voltage and amperage for the device or devices you want to power. Step 2: Determine the input voltage Once you have chosen your power supply, the next step is to determine the input voltage. This will depend on the type of power supply you have chosen. Some power supplies are designed to work with a wide range of input voltages, while others...
China AC DC Converter Module manufacture

2023-7-6

An AC DC converter module is an essential component in various electronic devices and systems. It plays a crucial role in converting alternating current (AC) power into direct current (DC) power, providing the necessary voltage and current levels required for the proper functioning of electronic circuits. The AC DC converter module consists of several key components, including transformers, rectifiers, filters, and voltage regulators. Each component plays a specific role in the conversion process. The transformer is responsible for stepping down or stepping up the input voltage level to the desired output voltage level. It consists of primary and secondary windings that are magnetically coupled to transfer energy from the input side to the output side. The primary winding is connected to the AC power source, while the secondary winding is connected to the rectifier. The rectifier is an electronic device that converts AC voltage into pulsating DC voltage. It typically consists of diodes that allow the flow of current in one direction only. The rectifier converts the AC voltage waveform into a pulsating waveform by allowing current to flow only during the positive half-cycle of the AC input. To smoothen the pulsating DC voltage, a filter is used. The filter...
DPX Series DC-DC Converter: Efficient and Reliable Power Conversion Solution

2023-6-18

The DPX Series DC-DC Converter is an innovative power conversion solution that combines efficiency and reliability. This converter is designed to provide a stable and regulated output voltage, making it ideal for use in a variety of applications, including telecommunications, industrial automation, and renewable energy systems. Efficiency is a key feature of the DPX Series DC-DC Converter. With its state-of-the-art design and advanced control algorithms, this converter can achieve conversion efficiencies of up to 98%. This means that the converter wastes very little energy, resulting in lower operating costs and reduced environmental impact. Another important feature of the DPX Series DC-DC Converter is its high reliability. This converter is designed to operate in harsh environments, with a wide operating temperature range of -40°C to 85°C. It also has a ruggedized construction, with a high degree of resistance to shock and vibration, making it ideal for use in demanding applications. The DPX Series DC-DC Converter is available in a wide range of input and output voltage options, making it versatile and flexible. It also supports a variety of input voltage ranges, including 12V, 24V, and 48V. This means that it can be used with a variety of different power sources, such...
Introducing the AES Series AC DC Converter

2023-6-20

The AES Series AC DC Converter is a highly advanced and efficient power converter that is designed to convert alternating current (AC) to direct current (DC) with utmost accuracy and precision. This converter is a highly versatile device that can be used in a range of applications, such as telecommunications, industrial automation, medical equipment, and more. The AES Series AC DC Converter is a state-of-the-art device that is designed to meet the most demanding requirements of modern electronic devices. It features advanced technology that ensures high efficiency, low ripple, and high reliability. Some of the key features of this device include high efficiency, high power density, high reliability, and high power factor correction. One of the key advantages of the AES Series AC DC Converter is its high efficiency. It is capable of converting up to 98% of the input power to the output power, making it one of the most efficient converters in the market. This high efficiency translates into lower energy consumption, reduced heat dissipation, and longer device life. Another advantage of the AES Series AC DC Converter is its high power density. This means that it is capable of delivering high power output in a compact and...
SD Series AC DC Power Supply: Reliable Power for Your Devices

2023-5-30

As technology advances, so does the need for reliable power sources. The SD Series AC DC power supply is a powerful and dependable option for any device requiring consistent and stable power. Whether for industrial equipment, medical devices or telecommunications systems, the SD Series AC DC power supply is a reliable choice. One of the key features of the SD Series AC DC power supply is its high-efficiency rating. With a conversion efficiency of up to 94%, it ensures that your devices receive the power they need without wasting energy. This means less heat generation and reduced energy consumption, which can translate into cost savings for your business. Another benefit of the SD Series AC DC power supply is its compact size. With its high power density design, it packs a lot of power into a small footprint. This makes it an ideal choice for space-constrained applications where size matters. Despite its small size, the SD Series AC DC power supply is also highly reliable and durable, with a mean time between failures (MTBF) of up to 300,000 hours. The SD Series AC DC power supply is also designed with safety in mind. It features overvoltage protection, overcurrent protection, short...
Etiquetas: ,

Más de 6000 opciones, soluciones integrales de fuentes de alimentación