noticias
Introducción de los fabricantes de módulos de potencia de tamaño pequeño de China
Autor： Módulo de potencia ZYG Time： 2022-5-5
When we choose a power module, we generally look at the quality of the input, output, ripple, breakdown, temperature, certification, and other characteristics of the power supply. Apart from these, we can also judge according to the following points.
1. Circuit principle and soldering process The bare board can use intuitive methods, such as a neat layout of components and potting modules without being exposed and unable to view the internal situation. The quality of the mechanized wave soldering process is better than manual soldering, generous, but Better in terms of safety and performance
2. The core of the power supply of chip components and transformer components is IC, which will directly affect the power and high-temperature resistance of the entire power transformer components. . Responsible for accomplishing AC-DC and saturating the fryer during energy overload.
3. Is it an electrolytic capacitor or a ceramic capacitor?
1）. The electrolytic capacitor is a temperature-sensitive component after the electrolyte heats up and explodes.
2）. Ceramic capacitors are mainly non-polar, and the switching frequency will cause the parasitic resistance of the capacitor to heat up. Good dielectric materials and capacity should not be too large. Most, it is widely used in high-frequency circuits.
4. Batch testing of aging and high-temperature aging No matter how good the quality stability of product materials and production process control is and whether the materials have potential safety hazards, aging needs to be detected. Only through power aging and high-temperature pumping detection.
The benefits of choosing a China Small size power module manufacturers
Power savings of up to 25% can be achieved with these new power switches, and the reduction in power consumption brings many improvements. On the one hand, the heat dissipation design of the heat sink and the overall module can be more compact and have higher cost performance. Providing the same output power but with a smaller product is an important advantage, especially in pump or fan designs. In general, by using smaller electronic drives, controlled motors can be used in applications that were not possible before. Also, reduced use of production materials means lower costs for production, transportation, and recycling, which all boil down to product life cycle costs.
On the other hand, the maximum output power can be increased while maintaining the consistency of the existing design parameters. Products that use the same thermal design but consume less power have higher reliability, because there is a less thermal excursion, and the failure rate is greatly reduced. Moreover, the same design can evolve into a variety of different models by simply replacing different output power chips, thereby shortening the time to market.
We have more modules with different powers, if you want to know more, please contact us.
Anterior: ¿A qué detalles debe prestar atención al personalizar los módulos de potencia?
Próximo: ¿Cuáles son los consejos para elegir un módulo de alimentación CC/CC?
informacion relevante
-
2023-7-5
Introducing the DM Series DC DC Power Supply: Unleashing Efficient and Reliable Power Solutions
In today's fast-paced and technology-driven world, the demand for efficient and reliable power solutions has never been more critical. From telecommunications to renewable energy systems, industries rely heavily on power supplies that can deliver uninterrupted and optimal performance. That's where the DM Series DC DC Power Supply comes into play, offering cutting-edge technology and unmatched reliability. The DM Series DC DC Power Supply is designed to meet the stringent power requirements of various applications, making it the go-to choice for professionals seeking high-quality power solutions. With its superior efficiency and reliability, this power supply ensures uninterrupted operations and enhances the performance of critical systems. One of the standout features of the DM Series is its high conversion efficiency. By employing...
Ver detalles -
2023-9-29
DC to DC Step-Down Adjustable Power Supply Module: Enhancing Voltage Regulation Efficiency
Introduction The demand for efficient and reliable power supply modules is increasing continuously. The DC to DC step-down adjustable power supply module is a vital component in various electronic devices, including smartphones, laptops, and IoT devices. This article explores the importance of voltage regulation efficiency in these power supply modules and how it can be enhanced to meet the growing demands of the industry. Importance of Voltage Regulation Efficiency Voltage regulation refers to the ability of a power supply module to maintain a constant output voltage regardless of input fluctuations or load variations. It is an essential characteristic as most electronic devices require a stable and precise voltage supply to function correctly. A slight deviation in the output voltage can...
Ver detalles -
2023-12-9
Enhance Your Electronics Projects with an Adjustable Power Supply Module
In today's fast-paced technological world, electronics projects are becoming increasingly popular among hobbyists, students, and professionals alike. Whether you are designing a circuit, testing components, or troubleshooting a device, having a reliable power supply is essential for the success of your project. This is where an adjustable power supply module comes into play. An adjustable power supply module is a versatile tool that provides a stable and adjustable voltage output for powering electronic circuits. It is designed to be compact, portable, and easy to use. With its numerous benefits, it can greatly enhance your electronics projects and make your life easier. One of the key advantages of using an adjustable power supply module is its ability to provide a wide...
Ver detalles -
2023-5-2
Industrial AC-DC Converter for Efficient Power Conversion
Industrial AC-DC converters are devices that convert alternating current (AC) to direct current (DC) for use in industrial applications. They are designed to provide efficient power conversion, enabling industrial equipment to operate reliably and efficiently. These converters are typically used in industrial processes such as manufacturing, automation and control systems, and power distribution systems. The primary function of an AC-DC converter is to convert the voltage and frequency of incoming AC power to the appropriate DC voltage required by the equipment. This requires a complex circuitry that includes a rectifier, filter, and voltage regulator. The rectifier converts the AC voltage to DC while the filter smoothes out the output voltage, and the voltage regulator ensures the output voltage is maintained...
Ver detalles -
2023-8-2
The Revolutionary Medical Power Series: Transforming Healthcare through Innovative Solutions
Introduction The healthcare industry has always been at the forefront of innovation, constantly striving to improve patient outcomes and revolutionize the way healthcare is delivered. In recent years, there has been a surge in groundbreaking medical technologies that have transformed the industry. One such series is the Revolutionary Medical Power Series, a collection of innovative solutions that have the potential to reshape healthcare as we know it. In this article, we will explore the key technologies in the series and discuss how they are transforming healthcare. 1. Artificial Intelligence (AI) in Healthcare Artificial Intelligence has emerged as a powerful tool in healthcare, enabling medical professionals to analyze large amounts of data and make accurate diagnoses. The Revolutionary Medical Power Series...
Ver detalles -
2023-9-18
AC/DC 5V Power Supply Module: Stable and Efficient Voltage Conversion Solution
We rely on smartphones, laptops, tablets, and various other gadgets to stay connected, informed, and entertained. However, all these devices require a stable and efficient power supply to function optimally. This is where the AC/DC 5V Power Supply Module comes into play. The AC/DC 5V Power Supply Module is a cutting-edge technology that provides a stable and efficient voltage conversion solution for various electronic devices. It converts alternating current (AC) power from the main power supply to direct current (DC) power with a voltage output of 5 volts. This ensures that electronic devices receive a constant and reliable power supply, preventing any fluctuations or interruptions that could potentially damage the device. One of the key features of the AC/DC 5V...
Ver detalles