Nachrichten
Wie wähle ich ein China DC-DC-Leistungsmodul? Warum ein DC-DC-Leistungsmodul wählen?
Autor： ZYG Leistungsmodul Time： 2022-7-29
Today, DC-DC power modules are widely used in post and telecommunications equipment, base stations, user power systems, monitoring systems and other equipment, industrial automation equipment and many other fields. So what exactly is a DC-DC power module, and what should be paid attention to when using it?
A DC-DC power module is a power module that converts DC power to DC power. Speaking of which, many people may ask, isn’t it unnecessary to convert DC to DC? In fact, in the process of daily use, our current is not static, sometimes high voltage is required, and sometimes low voltage is required. The DC-DC power module is to convert high voltage or low voltage current into the pressure we need. It works by converting direct current to alternating current, and alternating current to the direct current we need.
In daily use, the DC-DC power supply module is completed by the switching oscillation circuit, which itself will generate common mode and differential mode noise interference. So it is important to know that the current value should be more than twice the input current value. The internal resistance of the power supply should be low to reduce DC consumption. In addition, in order to ensure the strong reliability of the power module under long-term operation, its working power should be more than 10% of the rated power, so as to prevent the module from being stuck or slightly output causing voltage instability, which will affect our work.
Many customers use power modules to achieve power isolation. Then, according to different isolation requirements, it is necessary to select different power supplies, and there must be enough circuit distance between the output and input power supplies to avoid weakening the isolation effect during design.
How to choose the right power module
1. Circuit Design Principles and Technology
Only from a professional point of view, can the principle of the circuit and the quality of the circuit be distinguished. At present, power modules can be divided into two types: bare board and filled and sealed. The bare board can be divided into two types: reasonable, orderly, generous, orderly layout of electronic components, soldered, and straight. However, the packaged sealed module cannot be seen inside, but because it is not exposed, it is much better in terms of safety and performance indicators. The soldering process can include hand soldering and wave soldering. The soldering quality of mechanized wave soldering is better than that of manual soldering.
2. Components of the chip
The core of the power supply is the integrated circuit, which is like the brain of the power supply. The quality of the integrated circuit directly affects the parameters of the power supply.
3. Transformer components
Determine whether the power supply, temperature resistance, etc. are transformers. The transformer is responsible for completing the AC and DC power supply, and the energy overload will saturate the bomber.
4. Electrolytic capacitors and ceramic capacitors
Because electrolytic capacitors are completely monolithic capacitors, they have high reliability. They use sulfate as an insulating medium, which can make the volume smaller. The + symbol and some marking symbols are added to it. They are generally used for low-frequency cross-linking and bypass filters. The disadvantage is that The loss of muons is large. Due to the use of full monolithic electrolytic capacitors, the reliability is high. Due to the use of special materials, the performance is better than that of ordinary electrolysis, and the frequency characteristics are better, but the capacity is too much. Can be used in precision circuits such as oscillators or timing circuits.
Ceramic capacitors include ceramic dielectric capacitors, ceramic chip capacitors, ceramic tube capacitors, and ceramic semi-variable capacitors. It is mainly non-polar, the dielectric material is good, and the capacity cannot be too large. Suitable for high frequency circuits.
5. Batch testing of aging and high temperature aging
No matter how well a product’s materials and production processes are controlled, burn-in testing is required. Since the input detection of electronic components and transformers is difficult to control, only through the aging and high temperature sampling of the entire batch of power supplies can the quality stability of this batch of power supplies and whether there are potential safety hazards can be detected. Material.
Vorherige: So wählen Sie einen zuverlässigen DC-DC-Stromversorger in China aus
Nächste: So finden Sie einen zuverlässigen Netzteilhersteller
relevante Information
-
2023-7-1
Bidirectional DC-DC Converter: Efficient Power Conversion in Both Directions
Introduction In recent years, there has been a significant increase in the demand for bidirectional power conversion systems. These systems allow power to flow in both directions, enabling efficient energy transfer between different sources and loads. One crucial component of such systems is the bidirectional DC-DC converter. This article will delve into the working principle and advantages of the bidirectional DC-DC converter, highlighting its role in achieving efficient power conversion. Working Principle A bidirectional DC-DC converter is a power electronic device that converts direct current from one voltage level to another, while also allowing power flow in both directions. It consists of two main parts: an input stage and an output stage. The input stage typically consists of an active...
Einzelheiten anzeigen -
2023-6-8
How to Convert 110V AC to 12 Volt DC?
Converting 110V AC to 12 Volt DC can be a bit tricky, especially if you're not familiar with electrical work. But with the right tools and knowledge, it can be done safely and efficiently. In this article, we'll take a closer look at the steps involved in converting 110V AC to 12 Volt DC. Step 1: Understand the Basics Before you even begin the process of converting 110V AC to 12 Volt DC, it's important to have a basic understanding of how electricity works. AC, or alternating current, is the type of electricity that comes out of your wall outlets. DC, or direct current, is the type of electricity that is used to power many electronic devices. In order to...
Einzelheiten anzeigen -
2023-5-6
Designing an AC-DC Converter Circuit
An AC-DC converter circuit is an essential component in many electronic devices. It is a device that converts alternating current (AC) to direct current (DC). This circuit is commonly used in power supplies for electronic devices, such as laptops, smartphones, and other household appliances. In this article, we will discuss the basic components of an AC-DC converter circuit and the steps involved in designing one. Basic Components The basic components of an AC-DC converter circuit include a transformer, rectifier, filter, and regulator. The transformer is used to step down the AC voltage to a lower value. The rectifier converts the AC voltage to DC voltage. The filter removes the unwanted AC components from the DC output, and the regulator is...
Einzelheiten anzeigen -
2023-5-9
AC-DC Power Supply: Key Components and Applications
AC-DC power supplies are essential components in many electronic devices, ranging from small battery-powered gadgets to large industrial equipment. They convert AC power from mains or other sources into DC power that can be used to operate electronic circuits. In this article, we will discuss the key components of AC-DC power supplies and their applications. Key Components of AC-DC Power Supplies 1. Transformer: The transformer is the heart of an AC-DC power supply, as it converts the AC voltage from the mains or other sources to the required DC voltage level. A transformer consists of two or more coils of wire wrapped around a magnetic core, which allows the transfer of energy from one coil to another through magnetic induction....
Einzelheiten anzeigen -
2022-9-16
So wählen Sie eine DC-DC-Wandlerfabrik aus, wie Sie einen hochwertigen DC-DC-Wandler auswählen
Was ist ein DC-DC-Wandler? Ein DC-DC-Wandler, auch bekannt als DC-DC-Wandler oder DC-Transformator, ist eine Schaltung oder ein elektromechanisches Gerät, das elektrische Energie umwandelt. Es kann Gleichstrom (DC) in Gleichstrom (oder ungefähr Gleichstrom) mit unterschiedlichen Spannungen umwandeln. Seine Leistung reicht von sehr niedrig (kleine Batterien) bis sehr hoch (Hochspannungsleistungsübertragung). Die Ausgangsspannung einiger DC-DC-Wandler hat denselben Bezugspunkt wie die Eingangsspannung, während die Ausgangsspannung einiger DC-DC-Wandler von der Eingangsspannung isoliert ist. Auswahl der Induktivität für DC/DC-Wandler Die Auswahl einer Induktivität für einen DC/DC-Wandler hängt von vielen Parametern ab. Abhängig von den beteiligten Leistungspegeln können diese Induktoren ziemlich groß sein ...
Einzelheiten anzeigen -
2023-4-27
AC-DC Converter Module: Efficient Power Conversion Solution
AC-DC converter modules are electronic devices that are used to convert alternating current (AC) to direct current (DC). They are widely used in various applications such as power supplies, battery chargers, and LED lighting systems. These modules offer an efficient power conversion solution for many different industries.One of the key benefits of using an AC-DC converter module is that it can help to improve the efficiency of power conversion. By using a module that is specifically designed for the task at hand, less energy is lost during the conversion process. This means that less power is needed to achieve the same level of output, which can ultimately lead to cost savings and a more sustainable approach to energy usage.Another advantage...
Einzelheiten anzeigen