nyheder
Hvornår skal man vælge en AC-DC strømforsyningsproducent, og hvad er fordelene ved at vælge en AC-DC strømforsyning
Author： ZYG Power Module Time： 2022-9-14
AC DC Power Module Filling Requirements
Potting and sealing of AC DC power modules is very important. This process involves not only the protection of AC and DC power modules (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also the thermal design of AC and DC power modules.
Power module potting materials are generally divided into three categories: epoxy resin, polyurethane, and silicone rubber
Due to the hardness of epoxy resin, it cannot be used for stress-sensitive and module packaging and SMT components, so it is basically eliminated in module power supplies. But epoxy resins are also used in cost-critical micropower power supplies due to their low cost. Some domestic bad power supply manufacturers also use this epoxy resin for AC and DC power supply modules, but due to stress problems, the failure rate of this power supply is very high, and buyers are very distressed.
At present, most of the power modules are sealed with molded silicone. For the convenience of operation, the ratio of 1:1 is usually adopted. When designing for AC and DC power modules, attention should be paid to their thermal conductivity. However, the adhesion is not very strong, so a substrate coating can be used to improve sealing.
Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price of silicone rubber, polyurethane is not cost-effective. There is basically no domestic application of it.
Special attention should be paid to thermal conductivity in relation to thermal design. Generally speaking, a thermal conductivity of 0.5w/M·K is defined as high thermal conductivity, and a thermal conductivity greater than 1 is defined as very high thermal conductivity.
The power module is such a highly integrated small and medium-sized switching power supply. In recent years, with the development trend of high and new technology, it has been widely used in industrial electrical, power supply system, instrumentation, urban rail, intelligent security, new energy technology, communication, automation technology and intelligent system industry.
Make sure to type the source type first
The power module can input AC current or AC current. Normally, the FH/DC power module selects AC current input, and the DC/DC power module selects AC input. The high-cubic FH-DC power module can also be used normally under the DC input working voltage standard.
Type in the operating voltage category to select
After confirming the input source, the input working voltage can refer to the manufacturer’s motor selection structure. The communication keys are basically 120V, 230V, 220V. Now FH/DC power modules usually consider 86~265VAC or 150~370VDC types, and 220V also consider 230V types, but the probability of application at 230V will be much worse, and the DC keys are basically 5V~76V.
Select the package type of the item
Product package types include single in-line SIP package, small and medium vertical bare board, dual in-line ultra-small DIP package and rail package. The bare board is composed of a PCB circuit board and various components. It is completely exposed and not very safe, but the cost is low.
DIP packaging is usually strongly recommended. Although it is expensive to lose, it has the characteristics of potting packaging, safety protection, good heat dissipation characteristics of heat pipes, anti-freezing, moisture-proof and stable characteristics. must be selected on a case-by-case basis.
Select the output power of the goods according to the load size
When selecting the output power of the power module, it is usually strongly recommended to reserve the capacity, and the output power of the application is between 30 and 90% of the actual output power. The capacity is large and there are noise problems when working at high frequencies.
Tidligere: Sådan tilpasser du din China AC-DC strømforsyning til dine specifikke behov
Næste: Hvordan man vælger DC-DC Converter fabrik, hvordan man vælger høj kvalitet DC-DC Converter
relevant information
-
2023-5-24
High-Efficiency Industrial AC-DC Converter for Reliable Power Conversion
Abstract: This paper presents the design and implementation of a high-efficiency industrial AC-DC converter for reliable power conversion. The proposed converter is based on a two-stage structure that includes a power factor correction (PFC) stage and a DC-DC stage. The PFC stage is implemented using a boost converter, while the DC-DC stage is implemented using a full-bridge converter. The proposed converter is capable of operating in a wide input voltage range and provides a regulated DC output voltage. Simulation and experimental results show that the proposed converter achieves high efficiency and meets the requirements of industrial applications. Introduction: In industrial applications, reliable power conversion is essential to ensure the stable operation of various equipment and systems. AC-DC converters are widely...
Se detaljer -
2023-5-11
240V AC to 12V DC Converter wholesale – Efficient Power Conversion Solution
In today's world, where most of the electronic devices run on DC power, the requirement of a power converter has become inevitable. A 240V AC to 12V DC converter is one such solution that is efficient and reliable. It transforms the high voltage AC power from the mains into low voltage DC power suitable for powering electronic devices. The main advantage of a 240V AC to 12V DC converter is that it can be used to power a wide range of electronic devices that require low voltage DC power. These devices include radios, TVs, computers, and other electronic gadgets. The conversion process is efficient, and the output voltage is regulated, ensuring that the electronic devices receive a steady supply of...
Se detaljer -
2022-3-30
Er et brugerdefineret strømmodul bedre end et almindeligt strømmodul
Den hurtige udvikling af computerteknologi fører mennesker ind i informationssamfundet og fremmer også den hurtige udvikling af strømmodulteknologi. I firserne brugte computeren fuldt ud skiftestrømforsyningen, den første til at fuldføre computerens strømudskiftning. Så er skiftende strømforsyningsteknologi kommet ind på området for elektronisk og elektrisk udstyr. I dagens samfund, når du køber et strømmodul, vælger du så et almindeligt strømmodul eller et brugerdefineret strømmodul? I de fleste tilfælde er et universelt strømmodul tilgængeligt, mens et brugerdefineret strømmodul er sat op specifikt til visse situationer. Beslut derefter i henhold til kundernes faktiske behov, om du vil tilpasse strømmodulet eller købe et universelt strømmodul. ...
Se detaljer -
2024-1-4
Versatile Adjustable Power Supply Module: Empowering Electronics with Precision and Flexibility
In the fast-paced world of electronics, having a reliable and efficient power supply is essential. Whether you are a professional engineer or an electronics hobbyist, the need for a versatile and adjustable power supply module cannot be overstated. This article explores the importance of such a module and the benefits it brings to the field of electronics. Importance of a Versatile Adjustable Power Supply Module: A power supply module is a crucial component in any electronic system. It provides the necessary electrical energy required for the smooth functioning of various electronic devices. However, a standard fixed power supply may not always meet the diverse requirements of different electronic circuits. This is where a versatile adjustable power supply module comes into...
Se detaljer -
2023-5-2
Industrial AC-DC Converter for Efficient Power Conversion
In modern industry, efficient power conversion is essential for the smooth operation of various devices and machinery. One of the critical components in this process is the AC-DC converter. An industrial AC-DC converter is a device that converts alternating current (AC) power into direct current (DC) power. This essential component is used in a broad range of industries, including manufacturing, transportation, and energy production. The primary function of the industrial AC-DC converter is to regulate and convert the incoming AC power to a DC output that is suitable for powering the equipment or machinery. In most cases, the incoming AC power is at a higher voltage than the equipment or machinery requires. Therefore, the AC-DC converter reduces the voltage to...
Se detaljer -
2023-6-5
DC DC Converter EX Series: A Powerful and Reliable Solution for Your Power Management Needs
In today\'s fast-paced and technology-driven world, the need for efficient power management solutions has become more important than ever. Whether you are working with industrial machinery, electronic devices, or power-sensitive applications, you need a reliable and high-performance DC DC converter to ensure stable and efficient power supply. This is where the DC DC Converter EX Series comes in – a powerful and versatile solution designed to meet the diverse needs of modern power management. What is the DC DC Converter EX Series? The DC DC Converter EX Series is a range of high-performance DC DC converters designed to deliver reliable and efficient power management for a wide range of applications. These converters are built using advanced technology, innovative design, and...
Se detaljer