গুণগত মান ক্লিয়াৰেন্স, আৰু নিৰ্ভৰযোগ্য শক্তি মডিউল নিৰ্মাতা কেনেকৈ বাছি ল'ব?
গৃহ - ব্লগ - কোম্পানীৰ বাতৰি - এটা AC-DC শক্তি যোগান নিৰ্মাতা কেতিয়া বাছি ল'ব আৰু এটা AC-DC শক্তি যোগান বাছনি কৰাৰ সুবিধাসমূহ কি কি

এটা AC-DC শক্তি যোগান নিৰ্মাতা কেতিয়া বাছি ল'ব আৰু এটা AC-DC শক্তি যোগান বাছনি কৰাৰ সুবিধাসমূহ কি কি

Author: ZYG Power Module Time: 2022-9-14

AC DC Power Module Filling Requirements
Potting and sealing of AC DC power modules is very important. This process involves not only the protection of AC and DC power modules (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also the thermal design of AC and DC power modules.

Power module potting materials are generally divided into three categories: epoxy resin, polyurethane, and silicone rubber

Due to the hardness of epoxy resin, it cannot be used for stress-sensitive and module packaging and SMT components, so it is basically eliminated in module power supplies. But epoxy resins are also used in cost-critical micropower power supplies due to their low cost. Some domestic bad power supply manufacturers also use this epoxy resin for AC and DC power supply modules, but due to stress problems, the failure rate of this power supply is very high, and buyers are very distressed.
At present, most of the power modules are sealed with molded silicone. For the convenience of operation, the ratio of 1:1 is usually adopted. When designing for AC and DC power modules, attention should be paid to their thermal conductivity. However, the adhesion is not very strong, so a substrate coating can be used to improve sealing.

Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price of silicone rubber, polyurethane is not cost-effective. There is basically no domestic application of it.

Special attention should be paid to thermal conductivity in relation to thermal design. Generally speaking, a thermal conductivity of 0.5w/M·K is defined as high thermal conductivity, and a thermal conductivity greater than 1 is defined as very high thermal conductivity.

 

 

The power module is such a highly integrated small and medium-sized switching power supply. In recent years, with the development trend of high and new technology, it has been widely used in industrial electrical, power supply system, instrumentation, urban rail, intelligent security, new energy technology, communication, automation technology and intelligent system industry.

Make sure to type the source type first
The power module can input AC current or AC current. Normally, the FH/DC power module selects AC current input, and the DC/DC power module selects AC input. The high-cubic FH-DC power module can also be used normally under the DC input working voltage standard.

Type in the operating voltage category to select
After confirming the input source, the input working voltage can refer to the manufacturer’s motor selection structure. The communication keys are basically 120V, 230V, 220V. Now FH/DC power modules usually consider 86~265VAC or 150~370VDC types, and 220V also consider 230V types, but the probability of application at 230V will be much worse, and the DC keys are basically 5V~76V.

 

Select the package type of the item
Product package types include single in-line SIP package, small and medium vertical bare board, dual in-line ultra-small DIP package and rail package. The bare board is composed of a PCB circuit board and various components. It is completely exposed and not very safe, but the cost is low.

DIP packaging is usually strongly recommended. Although it is expensive to lose, it has the characteristics of potting packaging, safety protection, good heat dissipation characteristics of heat pipes, anti-freezing, moisture-proof and stable characteristics. must be selected on a case-by-case basis.

Select the output power of the goods according to the load size
When selecting the output power of the power module, it is usually strongly recommended to reserve the capacity, and the output power of the application is between 30 and 90% of the actual output power. The capacity is large and there are noise problems when working at high frequencies.

প্ৰাসংগিক তথ্য

  • 2023-8-5

    AC/DC Power Supply Module: Providing Reliable Electrical Power for Various Applications

    Introduction In the modern world, reliable electrical power is essential for the smooth functioning of various applications. From electronic devices to industrial machinery, a stable power supply is crucial to ensure optimal performance and prevent damage due to voltage fluctuations. This is where the AC/DC Power Supply Module comes into play. Designed with precision and efficiency in mind, this module is a reliable solution for meeting the power requirements of diverse applications. Understanding the AC/DC Power Supply Module The AC/DC Power Supply Module is a compact electronic device that converts the alternating current (AC) power from a wall outlet into direct current (DC) power suitable for powering electronic components. It operates on the principle of electromagnetic induction and employs various...

    সবিশেষ চাওক
  • 2023-6-18

    Bidirectional DC DC Converter: An Innovative Solution for Efficient Power Transfer

    In today's world, efficient power transfer is a critical aspect that plays a significant role in the development of various industries, including automotive, renewable energy, and telecommunications. The traditional DC DC converter is widely used for power transfer, but it has limitations in bidirectional power transfer. To overcome these limitations, the bidirectional DC DC converter has been introduced, which is an innovative solution for efficient power transfer. What is a Bidirectional DC DC Converter? A bidirectional DC DC converter is a power electronic device that can transfer power bidirectionally between two DC sources. It can convert the input voltage from one DC source to another DC source with a different voltage level. The main advantage of this converter is its...

    সবিশেষ চাওক
  • 2023-7-2

    Unleashing the Power of Language: Exploring the Advantages of a Bidirectional Converter

    Language is a powerful tool that connects people across cultures and enables them to express their thoughts, emotions, and ideas. However, the language barrier often poses a significant challenge in communication. In today's globalized world, there is a growing need for effective language translation and interpretation solutions to bridge this gap. One such solution that has gained significant attention is the bidirectional converter. A bidirectional converter is a cutting-edge technology that allows for seamless translation between two languages. Unlike traditional translators that convert text from one language to another, a bidirectional converter offers the unique ability to translate text back and forth between two languages. This bidirectional capability opens up a world of possibilities by empowering individuals to communicate more...

    সবিশেষ চাওক
  • 2023-5-30

    IXXYY Series DC DC Converter price

    The IXXYY Series DC DC Converter is an innovative and high-performance power conversion device that is designed to meet the demanding power supply requirements of various electronic systems. This converter operates on a DC to DC conversion principle and is capable of converting input power from a lower voltage to a higher voltage or vice versa, depending on the application. The IXXYY Series DC DC Converter is a versatile device that can be used in many different applications. It is commonly used in communication systems, industrial control systems, medical equipment, and military equipment. The converter is designed to meet the stringent requirements of these industries, including high efficiency, reliability, and ruggedness. One of the key features of the IXXYY Series...

    সবিশেষ চাওক
  • 2023-6-8

    Bidirectional DC DC Converter: A Solution for Efficient Power Conversion in Renewable Energy Systems

    As the world is moving towards sustainable energy sources, renewable energy systems are gaining immense popularity. However, the energy produced by these systems is often variable and unpredictable, making it challenging to integrate them into the existing power grids. To overcome this challenge, a bidirectional DC-DC converter has emerged as a promising solution. This article discusses the bidirectional DC-DC converter and its role in efficient power conversion in renewable energy systems. What is a Bidirectional DC-DC Converter? A bidirectional DC-DC converter is a power electronics device that can convert the direct current (DC) voltage from one level to another by switching between the input and output voltages. It can work in both directions, i.e., it can convert the energy from...

    সবিশেষ চাওক
  • 2023-5-11

    Why Choose 12V AC to DC Converter Module

    Introduction: The 12V AC to DC Converter Module is a device that is used to convert the AC voltage of 12V to DC voltage. The module is designed to provide a stable and reliable DC voltage for various applications. It is widely used in electronic projects, industrial applications, and automotive systems. Features: The 12V AC to DC Converter Module has several features that make it ideal for a variety of applications. Some of these features include: 1. Wide input voltage range: The module can accept input voltages ranging from 9V to 12V AC. 2. High conversion efficiency: The module has a high conversion efficiency of up to 85%. 3. Compact size: The module is small and compact, making it easy...

    সবিশেষ চাওক

6000+ বিকল্প, এক-ষ্টপ শক্তি যোগান সমাধান