প্ৰাসংগিক তথ্য

• 

  2023-2-13

  সৰু আকাৰৰ শক্তি মডিউল যোগানকাৰীসকল: আপোনাৰ এপ্লিকেচনৰ বাবে সঠিকটো বাছনি কৰা

  সৰু আকাৰৰ শক্তি মডিউলসমূহ কম খৰচ আৰু সৰু আকাৰৰ বাবে অধিক জনপ্ৰিয় হৈ পৰিছে। এই মডিউলসমূহৰ বহুতো যোগানকাৰী আছে, গতিকে আপোনাৰ এপ্লিকেচনৰ বাবে সঠিক এটা বাছনি কৰাটো কঠিন হ'ব পাৰে। এই ব্লগ পোষ্টত আমি সৰু আকাৰৰ শক্তি মডিউল যোগানকাৰী বাছনি কৰাৰ সময়ত বিবেচনা কৰিবলগীয়া কিছুমান কাৰকৰ বিষয়ে আলোচনা কৰিম। - সৰু আকাৰৰ শক্তি মডিউল কি? সৰু আকাৰৰ শক্তি মডিউলসমূহ হৈছে এটা ধৰণৰ শক্তি মডিউল যাৰ এটা সৰু আকাৰ থাকে। প্ৰায়ে চেল ফোন আৰু লেপটপ কম্পিউটাৰৰ দৰে পৰ্টেবল ডিভাইচত ব্যৱহাৰ কৰা হয়। সৰু আকাৰৰ শক্তি মডিউলসমূহ সাধাৰণতে কম খৰচী আৰু অন্য ধৰণৰ শক্তি মডিউলসমূহতকৈ কম লিড সময় থাকে। - ছোট আকার শক্তি ব্যবহারের সুবিধা...

  সবিশেষ চাওক
• 

  2023-6-19

  AC to DC Converter Module – 12V Output

  Introduction The AC to DC Converter Module is an electronic device used to convert alternating current (AC) to direct current (DC). This module is designed to provide a 12V output that can be used for various purposes. In this article, we will discuss the working principle, applications, and benefits of this module. Working Principle The AC to DC Converter Module consists of a step-down transformer, a rectifier, and a filter capacitor. The AC voltage is first stepped down by the transformer and then rectified by the diodes in the rectifier. The rectified voltage is then filtered by the capacitor to remove any ripples and provide a smooth DC output. The output voltage can be adjusted by changing the turns ratio...

  সবিশেষ চাওক
• 

  2023-5-11

  China 240V AC to 12V DC Converter – Efficiently Power Your Devices

  A 240V AC to 12V DC converter is an essential device for anyone who needs to power their electronic devices efficiently. This converter allows you to convert the high voltage from your outlet to a lower voltage that is suitable for your device. One of the main benefits of using a converter is that it can help save energy. By converting the voltage from 240V AC to 12V DC, you can reduce the amount of power that is wasted as heat. This means that your devices will run more efficiently and you will save money on your electricity bill. Another advantage of using a converter is that it can help to extend the life of your electronic devices. Many devices...

  সবিশেষ চাওক
• 

  2023-5-2

  Designing an AC-DC Converter Circuit

  Introduction AC-DC converters are electronic circuits used to convert an AC voltage to a DC voltage. These circuits are used in a wide range of devices, including power supplies for electronic equipment, battery chargers, and LED drivers. In this article, we will discuss the design of an AC-DC converter circuit. Design Considerations The design of an AC-DC converter circuit involves several considerations, including the input voltage, output voltage, output current, and efficiency. The input voltage is the AC voltage that is to be converted to DC. The output voltage is the DC voltage required for the load. The output current is the current that the load requires. The efficiency is the ratio of the output power to the input power....

  সবিশেষ চাওক
• 

  2023-5-21

  How to Convert 110V AC to 12 Volt DC

  If you have an electronic device that requires 12 Volt DC power but only have access to 110V AC power, you will need to convert the AC power to DC. This can be done with the use of a power supply or adapter. In this article, we will guide you through the steps on how to convert 110V AC to 12 Volt DC. Step 1: Determine the DC Voltage Required Before attempting to convert the AC power to DC, you must first determine the DC voltage required by the device you wish to operate. Most electronic devices will have the required voltage printed on the label or in the user manual. Make sure to take note of this voltage before...

  সবিশেষ চাওক
• 

  2023-5-4

  Design and Development of an Industrial AC-DC Converter

  Introduction Industrial AC-DC converters are essential components in modern power electronics systems. They convert alternating current (AC) power from the grid to direct current (DC) power for use in various industrial applications. The design and development of an efficient industrial AC-DC converter require a thorough understanding of power electronics principles and a careful selection of components to ensure optimal performance. This article discusses the essential steps involved in the design and development of an industrial AC-DC converter. Step 1: Determine the Specifications The first step in the design process is to determine the specifications of the industrial AC-DC converter. The specifications should include the input voltage and frequency, output voltage and current, power rating, and efficiency requirements. These specifications will...

  সবিশেষ চাওক