গুণগত মান ক্লিয়াৰেন্স, আৰু নিৰ্ভৰযোগ্য শক্তি মডিউল নিৰ্মাতা কেনেকৈ বাছি ল'ব?
গৃহ - ব্লগ - কোম্পানীৰ বাতৰি - DC-DC Converter কাৰখানা কেনেকৈ বাছি লব, উচ্চমানৰ DC-DC Converter কেনেকৈ বাছি লব

DC-DC Converter কাৰখানা কেনেকৈ বাছি লব, উচ্চমানৰ DC-DC Converter কেনেকৈ বাছি লব

Author: ZYG Power Module Time: 2022-9-16

What is a DC-DC converter?
A DC-DC converter, also known as a DC-DC converter or DC transformer, is a circuit or electromechanical device that converts electrical energy. It can convert direct current (DC) power to DC power (or approximate DC) of different voltages. Its power ranges from very low (small batteries) to very high (high voltage power transfer). The output voltage of some DC-DC converters has the same reference point as the input voltage, while the output voltage of some DC-DC converters is isolated from the input voltage.

 

 

DC-DC Converter Inductor Selection

The process of selecting an inductor for a DC-DC converter depends on many parameters. Depending on the power levels involved, these inductors can be quite large and may need to be designed for your system. In addition to the required area, the following specifications are also important. You need to consider the choice of DC-DC converter electrical sensors:

Rated current and coil resistance. The coil itself will have some DC resistance, which will generate heat and reduce some voltage across the inductance. Coil resistance should be as low as possible to prevent power loss. Also, the current rating will depend on the physical size of the inductor package; winding sensors are used for high power converters, while foil electric motors can be used for low power converters.

 

 

saturation current. Ferrite sensors will have some saturation current, which will saturate the core than saturation current sensors. This will cause the next switching cycle to lag. The inductor should be chosen so that the saturation current is greater than the maximum current required by the system.

inductance and frequency. All components have parasitic effects. Parasitic capacitances between windings and coil resistances can cause the system to self-resonate. In fact, the self-resonant frequency of the inductor is usually very high, so it doesn’t matter unless you intend to use a PWM signal with a very fast edge rate and a frequency around MHz.

DC DC Converter Inductor Selection and Inductor Type

Finally, and least important is the inductance value. The required inductor value depends on the topology you use, as this will determine the function the DC-DC converter needs to perform.

প্ৰাসংগিক তথ্য

  • 2023-12-16

    DC-DC Power Supply Module: Efficient and Reliable Solutions for Your Electronic Devices

    In today's fast-paced world, electronic devices have become an integral part of our lives. From smartphones and laptops to electric vehicles and industrial machinery, these devices rely on a stable and efficient power supply to function optimally. DC-DC power supply modules have emerged as reliable solutions that provide efficient power conversion for various electronic devices. In this article, we will delve into the benefits and applications of DC-DC power supply modules, highlighting their importance in powering our modern world. Efficiency and Reliability: One of the key advantages of DC-DC power supply modules is their high efficiency in converting power from one voltage level to another. Traditional linear power supplies often suffer from significant power losses due to the use of...

    সবিশেষ চাওক
  • 2023-10-11

    Dual Power Supply Module: Ensuring Reliable and Efficient Energy for Your Devices

    Introduction: In today's technologically advanced world, the importance of reliable and efficient energy supply for electronic devices cannot be overstated. From small handheld gadgets to large-scale industrial equipment, uninterrupted power is crucial for seamless operation. To address this need, the dual power supply module has emerged as a game-changer, offering enhanced reliability, flexibility, and efficiency. This article explores the features and benefits of the dual power supply module in ensuring reliable and efficient energy for your devices. 1. Understanding the Dual Power Supply Module: The dual power supply module is a sophisticated technological solution that allows devices to operate seamlessly by simultaneously drawing power from two independent power sources. Typically, it consists of two power input channels and a power...

    সবিশেষ চাওক
  • 2022-5-18

    এটা সাধাৰণ শক্তি মডিউলতকৈ এটা স্বনিৰ্বাচিত শক্তি মডিউল ভাল নেকি?

    যেতিয়া আপুনি এটা শক্তি মডিউল কিনে, আপুনি এটা সাধাৰণ শক্তি মডিউল বা এটা স্বনিৰ্বাচিত শক্তি মডিউল বাছনি কৰেনে? বেছিভাগ ক্ষেত্ৰতে, সাধাৰণ শক্তি মডিউলসমূহ উপলব্ধ, যেতিয়া স্বনিৰ্বাচিত শক্তি মডিউলসমূহ বিশেষভাৱে কিছুমান পৰিস্থিতিৰ বাবে সংস্থাপন কৰা হয়। তাৰ পিছত গ্ৰাহকৰ প্ৰকৃত প্ৰয়োজন অনুসৰি পাৱাৰ মডিউলটো কাষ্টমাইজ কৰিব নে সাধাৰণ পাৱাৰ মডিউল কিনিব সেইটো সিদ্ধান্ত লওক। এই অতি প্ৰতিযোগিতামূলক বজাৰখনত যদি কোনো উদ্যোগে নিজৰ সামগ্ৰীৰ প্ৰতিযোগিতামূলক ক্ষমতা বৃদ্ধি কৰিব বিচাৰে তেন্তে ইয়াৰ সামগ্ৰীৰ কিছুমান বিশেষ উল্লেখযোগ্য দিশ থাকিব লাগিব, আৰু ইয়াৰ সামগ্ৰীৰ ডিজাইনক পৃথক কৰাটো অতি গুৰুত্বপূৰ্ণ হৈ পৰে। সকলোৰে কিবা নহয় কিবা আছে, ভালদৰে কৰিব লাগিব, সকলোৰে কিবা নহয় কিবা এটা নাই, উদ্ভাৱন কৰিব লাগিব। তথাকথিত কাষ্টম শক্তি মডিউল আচলতে এটা নতুন...

    সবিশেষ চাওক
  • 2023-4-14

    AC-DC Converter: Changing Electrical Current for Efficient Power Conversion

    An AC-DC converter is a device that changes alternating current (AC) to direct current (DC). It is commonly used in power supplies for electronic devices and appliances. The reason for converting AC to DC is that most electronic devices require DC to operate, whereas AC is the form of electricity that is delivered to homes and businesses. The conversion process of AC to DC involves several steps. The first step is to take the AC input and rectify it, which means converting it to a pulsating DC signal. This is achieved by using a diode or a bridge rectifier. The next step is to filter the pulsating DC signal using a capacitor or an inductor. This smooths out the signal...

    সবিশেষ চাওক
  • 2023-6-19

    Design and Analysis of a Bidirectional DC-DC Converter for Power Electronics Applications

    Introduction: Power electronics has become an integral part of many electrical systems. It is used to manage power, convert power from one form to another, and distribute power. One of the most commonly used power electronics devices is the DC-DC converter. A DC-DC converter is an electronic circuit that converts a DC voltage level from one level to another. In this paper, we will discuss the design and analysis of a bidirectional DC-DC converter that can be used in power electronics applications. Design: The bidirectional DC-DC converter consists of two parts: a buck converter and a boost converter. The buck converter is used to step down the input voltage, and the boost converter is used to step up the output...

    সবিশেষ চাওক
  • 2023-4-25

    how to wire ac to dc power supply

    When it comes to converting AC to DC power, there are a few different methods that can be used. However, one of the most common and straightforward ways to accomplish this is by using a power supply. Here's a step-by-step guide on how to wire an AC to DC power supply: Step 1: Determine the voltage and current requirements Before you begin, it's important to know what voltage and current requirements you have for your DC load. This will help you choose the right power supply for your needs. Step 2: Choose the type of power supply There are two main types of power supplies: linear and switching. Linear power supplies are simple and provide a smooth output, but they...

    সবিশেষ চাওক

6000+ বিকল্প, এক-ষ্টপ শক্তি যোগান সমাধান