বাতৰি
গুৰুত্ব, গঠন আৰু ডিচি-ডিচি শক্তি মডিউল কেনেকৈ বাছি ল'ব লাগে তাৰ বিষয়ে?
Author： ZYG Power Module Time： 2022-4-7
With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.
The importance of DC-DC power module:
DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.
For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.
Power structure of DC-DC power module:
The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.
The selection of power modules should be based on the following four points:
1, the use of mature power supply topology
The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.
2, high efficiency within the full load range
High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.
3, limit temperature characteristics
The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.
4, high isolation, low isolation capacitance
Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.
পূৰ্ৱবৰ্তী: গুণগত মান ক্লিয়াৰেন্স, আৰু নিৰ্ভৰযোগ্য শক্তি মডিউল নিৰ্মাতা কেনেকৈ বাছি ল'ব?
এটাৰ পাচৰ: মডিউল পাৱাৰ মোড কি
প্ৰাসংগিক তথ্য
-
2023-7-21
How to find AC to DC Converter in stores
In today's technologically advanced world, the need for efficient power supply is of utmost importance. Many electronic devices and appliances operate on direct current (DC) while the main power supply is alternating current (AC). To bridge this gap, an AC to DC converter is required. Fortunately, there are various types of AC to DC converters readily available at stores. An AC to DC converter, also known as a rectifier, is a device that converts alternating current (AC) into direct current (DC). This conversion is crucial as most electronic devices, such as mobile phones, laptops, and televisions, require a stable DC power supply to function effectively. These converters play a vital role in ensuring proper functioning and longevity of electronic appliances....
সবিশেষ চাওক -
2023-4-18
AC-DC Converter: Converting Alternating Current to Direct Current
An AC-DC converter is an electronic device that is used to convert alternating current (AC) to direct current (DC). AC is the type of electricity that is produced by power stations and is supplied to our homes and businesses. DC, on the other hand, is the type of electricity that is used by most electronic devices such as computers and mobile phones. The conversion from AC to DC is necessary because most electronic devices cannot operate on AC. The AC-DC converter works by using a rectifier circuit to convert the AC input into a pulsating DC waveform. This waveform is then smoothed out using a filter circuit, which removes most of the remaining AC signal and leaves behind a relatively...
সবিশেষ চাওক -
2023-8-25
China SF Series: The Ultimate AC DC Power Supply Solution
Where technology has become an integral part of our lives, having a reliable and efficient power supply solution is of utmost importance. Whether it is for industrial applications, telecommunications, or consumer electronics, a power supply that can handle the demand and provide stable and clean power is crucial. This is where the SF Series comes into the picture – the ultimate AC DC power supply solution. The SF Series is a line of power supplies designed to meet the diverse needs of various industries. With its cutting-edge technology and innovative design, it offers unparalleled performance and reliability. Whether you need a power supply for critical medical equipment, high-power servers, or sensitive laboratory instruments, the SF Series has you covered. One...
সবিশেষ চাওক -
2023-6-3
ZP Series AC DC Converter: Efficient and Reliable Power Conversion Solution
The ZP series AC DC converter is a power conversion solution that combines efficiency and reliability to provide seamless power conversion for various applications. This series is designed to convert AC power into DC power with high efficiency and low power loss, making it an ideal choice for a wide range of applications. Efficiency One of the key features of the ZP series AC DC converter is its high efficiency. This series is designed to operate at high efficiency levels, which means that it can convert large amounts of power with minimal losses. This makes it an ideal choice for applications that require high power conversion efficiency, such as industrial automation, telecommunications, and medical equipment. Reliability Another key feature of...
সবিশেষ চাওক -
2023-7-12
ZP Series AC DC Converter: High Efficiency and Reliable Power Conversion Solution
Introduction In today's world, where energy efficiency and reliability are paramount, having a high-quality power conversion solution is crucial. One such solution is the ZP Series AC DC Converter, designed to provide efficient and reliable power conversion for a wide range of applications. This article will delve into the various features and benefits of the ZP Series AC DC Converter, highlighting its efficiency and reliability. Efficiency Efficiency is a key factor when it comes to power conversion, as it directly impacts energy consumption and operating costs. The ZP Series AC DC Converter boasts an impressive efficiency rating, ensuring minimal energy loss during the conversion process. This high efficiency not only reduces energy wastage but also helps in maintaining a sustainable...
সবিশেষ চাওক -
2023-6-23
Revolutionary Bidirectional Converter: Seamlessly Translating between English and Another Language
Introduction: The world is rapidly becoming more connected, with people from different countries and cultures interacting with each other more often than ever before. However, language barriers remain a significant obstacle to effective communication, and the need for accurate translation services has never been greater. Fortunately, recent advancements in technology have made it possible to develop a revolutionary bidirectional converter that can seamlessly translate between English and another language. The Bidirectional Converter: The bidirectional converter is a cutting-edge technology that can translate between two languages, including English and any other language. It\'s an intelligent software application that can understand not only the grammar but also the context of the text being translated. This is made possible by using artificial intelligence...
সবিশেষ চাওক