الإخبارية
متى تختار شركة تصنيع مصدر طاقة AC-DC وما هي فوائد اختيار مصدر طاقة AC-DC
المؤلف ： ZYG Power Module Time： 2022-9-14
AC DC Power Module Filling Requirements
Potting and sealing of AC DC power modules is very important. This process involves not only the protection of AC and DC power modules (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also the thermal design of AC and DC power modules.
Power module potting materials are generally divided into three categories: epoxy resin, polyurethane, and silicone rubber
Due to the hardness of epoxy resin, it cannot be used for stress-sensitive and module packaging and SMT components, so it is basically eliminated in module power supplies. But epoxy resins are also used in cost-critical micropower power supplies due to their low cost. Some domestic bad power supply manufacturers also use this epoxy resin for AC and DC power supply modules, but due to stress problems, the failure rate of this power supply is very high, and buyers are very distressed.
At present, most of the power modules are sealed with molded silicone. For the convenience of operation, the ratio of 1:1 is usually adopted. When designing for AC and DC power modules, attention should be paid to their thermal conductivity. However, the adhesion is not very strong, so a substrate coating can be used to improve sealing.
Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price of silicone rubber, polyurethane is not cost-effective. There is basically no domestic application of it.
Special attention should be paid to thermal conductivity in relation to thermal design. Generally speaking, a thermal conductivity of 0.5w/M·K is defined as high thermal conductivity, and a thermal conductivity greater than 1 is defined as very high thermal conductivity.
The power module is such a highly integrated small and medium-sized switching power supply. In recent years, with the development trend of high and new technology, it has been widely used in industrial electrical, power supply system, instrumentation, urban rail, intelligent security, new energy technology, communication, automation technology and intelligent system industry.
Make sure to type the source type first
The power module can input AC current or AC current. Normally, the FH/DC power module selects AC current input, and the DC/DC power module selects AC input. The high-cubic FH-DC power module can also be used normally under the DC input working voltage standard.
Type in the operating voltage category to select
After confirming the input source, the input working voltage can refer to the manufacturer’s motor selection structure. The communication keys are basically 120V, 230V, 220V. Now FH/DC power modules usually consider 86~265VAC or 150~370VDC types, and 220V also consider 230V types, but the probability of application at 230V will be much worse, and the DC keys are basically 5V~76V.
Select the package type of the item
Product package types include single in-line SIP package, small and medium vertical bare board, dual in-line ultra-small DIP package and rail package. The bare board is composed of a PCB circuit board and various components. It is completely exposed and not very safe, but the cost is low.
DIP packaging is usually strongly recommended. Although it is expensive to lose, it has the characteristics of potting packaging, safety protection, good heat dissipation characteristics of heat pipes, anti-freezing, moisture-proof and stable characteristics. must be selected on a case-by-case basis.
Select the output power of the goods according to the load size
When selecting the output power of the power module, it is usually strongly recommended to reserve the capacity, and the output power of the application is between 30 and 90% of the actual output power. The capacity is large and there are noise problems when working at high frequencies.
سابق: كيفية تخصيص مصدر طاقة الصين AC-DC لاحتياجاتك الخاصة
التالي: كيفية اختيار مصنع محول DC-DC ، وكيفية اختيار محول DC-DC عالي الجودة
معلومات ذات صلة
-
2023-5-15
An AC-DC converter for cars is a device that converts the alternating current (AC) from a car's electrical system into direct current (DC) that is suitable for powering electronic devices. Most modern cars have an AC electrical system designed to power the car's battery and accessories, such as the headlights, radio, and air conditioning system. However, electronic devices, such as mobile phones, tablets, and laptops, typically require a DC power source. The AC-DC converter for cars works by taking the AC voltage from the car's electrical system and converting it into a DC voltage that is suitable for powering electronic devices. The converter typically consists of a rectifier, a filter, and a voltage regulator. The rectifier converts the AC voltage...
عرض التفاصيل -
2023-4-15
How to Build an AC-DC Converter
An AC-DC converter is an electronic circuit that converts alternating current (AC) to direct current (DC). It is an essential component in many electronic devices, such as power supplies and battery chargers. In this article, we will explore how to build an AC-DC converter. Step 1: Gather Components The first step is to gather all the necessary components. You will need a transformer, a diode bridge, a capacitor, and a voltage regulator. - Transformer: A transformer is used to step down the AC voltage to a lower level. The transformer should have a secondary winding with a voltage rating that matches the desired output voltage of the converter. - Diode Bridge: A diode bridge is used to convert AC to...
عرض التفاصيل -
2023-8-31
The Electrifying Power Series: Unleashing the Potential of Electricity
Introduction Electricity is an integral part of our lives, powering our homes, industries, and transportation systems. It is a form of energy that has revolutionized the way we live and has become the backbone of modern society. In this article, we will explore the electrifying power series, which aims to unleash the full potential of electricity. Chapter 1: The History of Electricity To understand the potential of electricity, we must first delve into its history. The discovery of electricity dates back to ancient times, with the observation of static electricity by the Greeks and the invention of the Leyden jar by a Dutch physicist in the 18th century. However, it was not until the late 19th century that electricity became...
عرض التفاصيل -
2022-12-20
كيفية حل مشكلة اختيار وحدة الطاقة
ليس من السهل تحديد وحدة الطاقة. هناك العديد من الصعوبات للنظر فيها. ما مقدار معرفتك؟ الخرزات المغناطيسية ، المكثفات ، الثنائيات ، المقاومات ... جميعها لها قصص داخلية متشابهة ، لكن الناس لا يهتمون بها كثيرًا. هناك طوبولوجيا مختلفة لوحدات الطاقة ، مثل flyback ، و forward ، و push-pull ، و half-bridge ، و full-bridge. نظرًا لمبادئهم الأساسية المختلفة ، يتجلى كل منهم بشكل أساسي في المزايا على مستوى بعض المؤشرات المميزة. لا يحتوي مصدر الطاقة flyback على فترة زمنية لشحن البطارية وتفريغها أثناء فترة تبديل الطاقة. هذا لأنه لا توجد خاصية زمنية لخاصية الاستجابة ، ولا يمكن ضمان أن يكون الباود الحبيبي جيدًا جدًا ، على الرغم من ...
عرض التفاصيل -
2023-4-19
بناء مصدر طاقة تيار متردد بجهد 120 فولت لإخراج تيار مستمر بجهد 3 فولت
Introduction: In this tutorial, we will learn how to build a 120V AC power supply that outputs 3V DC. This is a simple project that can be completed by anyone with basic knowledge of electronics. The power supply can be used to power small electronic projects, such as LED lights or small motors. Let\'s get started! Materials Required: - 120V AC power source - Transformer (120V AC to 3V AC) - Bridge rectifier (1N4007) - Capacitor (1000uF, 16V) - Voltage regulator (LM7805) - Heat sink - Resistor (220 ohm) - LED - Breadboard - Jumper wires Instructions: Step 1: Connect the Transformer Connect the primary side of the transformer to the 120V AC power source. The secondary side of the...
عرض التفاصيل -
2023-9-11
Versatile Adjustable Power Supply Module: The Key to Optimal Voltage Control
Having a reliable and efficient power supply is crucial for the smooth operation of various devices and systems. Whether it is in the field of electronics, telecommunications, or even renewable energy, the ability to control and adjust voltage levels is essential. That is where a versatile adjustable power supply module comes into play. This module acts as a key component in achieving optimal voltage control, allowing for flexibility and adaptability in various applications. One of the primary advantages of a versatile adjustable power supply module is its ability to provide a wide range of voltage outputs. This flexibility is achieved through the use of adjustable voltage regulators, which can be easily adjusted to the desired voltage levels. This feature is...
عرض التفاصيل