nuus
Wanneer om 'n AC-DC kragbron vervaardiger te kies en wat is die voordele van die keuse van 'n AC-DC kragbron
Author： ZYG Power Module Time： 2022-9-14
AC DC Power Module Filling Requirements
Potting and sealing of AC DC power modules is very important. This process involves not only the protection of AC and DC power modules (waterproof, moisture-proof, dust-proof, anti-corrosion, etc.), but also the thermal design of AC and DC power modules.
Power module potting materials are generally divided into three categories: epoxy resin, polyurethane, and silicone rubber
Due to the hardness of epoxy resin, it cannot be used for stress-sensitive and module packaging and SMT components, so it is basically eliminated in module power supplies. But epoxy resins are also used in cost-critical micropower power supplies due to their low cost. Some domestic bad power supply manufacturers also use this epoxy resin for AC and DC power supply modules, but due to stress problems, the failure rate of this power supply is very high, and buyers are very distressed.
At present, most of the power modules are sealed with molded silicone. For the convenience of operation, the ratio of 1:1 is usually adopted. When designing for AC and DC power modules, attention should be paid to their thermal conductivity. However, the adhesion is not very strong, so a substrate coating can be used to improve sealing.
Polyurethane has been used in China for a period of time, but due to its high hardness, inconvenient maintenance, and the price of silicone rubber, polyurethane is not cost-effective. There is basically no domestic application of it.
Special attention should be paid to thermal conductivity in relation to thermal design. Generally speaking, a thermal conductivity of 0.5w/M·K is defined as high thermal conductivity, and a thermal conductivity greater than 1 is defined as very high thermal conductivity.
The power module is such a highly integrated small and medium-sized switching power supply. In recent years, with the development trend of high and new technology, it has been widely used in industrial electrical, power supply system, instrumentation, urban rail, intelligent security, new energy technology, communication, automation technology and intelligent system industry.
Make sure to type the source type first
The power module can input AC current or AC current. Normally, the FH/DC power module selects AC current input, and the DC/DC power module selects AC input. The high-cubic FH-DC power module can also be used normally under the DC input working voltage standard.
Type in the operating voltage category to select
After confirming the input source, the input working voltage can refer to the manufacturer’s motor selection structure. The communication keys are basically 120V, 230V, 220V. Now FH/DC power modules usually consider 86~265VAC or 150~370VDC types, and 220V also consider 230V types, but the probability of application at 230V will be much worse, and the DC keys are basically 5V~76V.
Select the package type of the item
Product package types include single in-line SIP package, small and medium vertical bare board, dual in-line ultra-small DIP package and rail package. The bare board is composed of a PCB circuit board and various components. It is completely exposed and not very safe, but the cost is low.
DIP packaging is usually strongly recommended. Although it is expensive to lose, it has the characteristics of potting packaging, safety protection, good heat dissipation characteristics of heat pipes, anti-freezing, moisture-proof and stable characteristics. must be selected on a case-by-case basis.
Select the output power of the goods according to the load size
When selecting the output power of the power module, it is usually strongly recommended to reserve the capacity, and the output power of the application is between 30 and 90% of the actual output power. The capacity is large and there are noise problems when working at high frequencies.
vorige: Hoe om jou China AC-DC kragtoevoer aan te pas by jou spesifieke behoeftes
volgende: Hoe om DC-DC Converter fabriek te kies, hoe om hoë kwaliteit DC-DC Converter te kies
relevante inligting
-
2023-4-26
Industrial AC-DC Converter: Powering Your Equipment with Efficiency and Reliability
An industrial AC-DC converter is an essential component in many industrial applications that require efficient and reliable power conversion. These converters are commonly used in power supplies for a wide range of industrial equipment such as machinery, robotics, and automation systems.An AC-DC converter is a device that converts alternating current (AC) power into direct current (DC) power, which is necessary for powering electronic devices. The converter typically consists of a rectifier, which converts the AC power into a DC voltage, and a filter, which smooths out the DC voltage to provide a constant output.Industrial AC-DC converters are designed to operate in harsh environments, where temperature, humidity, and other factors may affect the performance of the device. These converters are built...
Sien besonderhede -
2023-4-13
AC-DC Converter: Converting Alternating Current to Direct Current
An AC-DC converter, also known as a rectifier, is an electronic device that converts alternating current (AC) to direct current (DC) by utilizing diodes or other semiconductor devices. This conversion is essential for many electronic devices that require DC power to function, such as computers, televisions, and radios. There are two main types of AC-DC converters: half-wave and full-wave rectifiers. A half-wave rectifier only allows one-half of the AC waveform to pass through, resulting in a DC voltage that is only half as large as the AC voltage. A full-wave rectifier allows the entire AC waveform to pass through, resulting in a DC voltage that is nearly equal to the AC voltage. In addition to diodes, AC-DC converters may also...
Sien besonderhede -
2023-12-22
DC-DC Power Supply Module: A Compact Solution for Efficient Power Conversion
In today's fast-paced world, efficient power conversion is crucial for various electronic devices and systems. The DC-DC power supply module offers a compact solution to address this need. This article will delve into the concept of the DC-DC power supply module, its working principle, advantages, and applications. Working Principle The DC-DC power supply module converts one DC voltage level to another, thus providing the required output voltage for electronic devices or systems. It operates on the principle of power conversion using power semiconductors like transistors and diodes. These semiconductors control the flow of current and voltage to ensure efficient power conversion. Advantages of DC-DC Power Supply Module Compact Size: The DC-DC power supply module is designed to be compact, making...
Sien besonderhede -
2023-6-21
AC to DC Converter Available in Store
In today's world, we are surrounded by electronic devices that require different types of voltages to operate. Some devices work on direct current (DC), while others function on alternating current (AC). The power supplied in our homes and offices is generally AC, but most electronic devices require DC to function correctly. Therefore, AC to DC converters come into the picture. An AC to DC converter is a device that converts alternating current (AC) into direct current (DC). It is also known as a rectifier or a power supply. The AC to DC converter is a vital component of any electronic device that operates on DC power. AC to DC converters are widely used in various applications, including power supplies for...
Sien besonderhede -
2023-7-23
Exploring the Applications and Advantages of Bidirectional DC-DC Converters
Introduction Bidirectional DC-DC converters have gained significant attention in recent years due to their versatile applications and advantages. These converters are capable of transferring power bidirectionally between two DC sources or systems with different voltage levels. In this article, we will explore the various applications and advantages of bidirectional DC-DC converters. Applications of Bidirectional DC-DC Converters 1. Electric Vehicles (EVs) One of the most significant applications of bidirectional DC-DC converters is in electric vehicle systems. These converters play a crucial role in managing the power flow between the vehicle\'s battery pack and the electrical grid. During charging, the bidirectional converter allows power to flow from the grid to the battery pack efficiently, enabling fast and controlled charging. On the other...
Sien besonderhede -
2023-9-16
Efficient and Versatile: Introducing the 850W Modular Power Supply
Having a reliable and efficient power supply is crucial for any computer system. Whether you are a casual user, a professional gamer, or a content creator, you need a power supply that can deliver consistent and clean power to support your demanding tasks. Introducing the 850W Modular Power Supply – a versatile solution that meets the needs of even the most power-hungry systems. One of the standout features of the 850W Modular Power Supply is its impressive efficiency. With an 80 Plus Gold certification, it offers up to 90% efficiency, meaning that less power is wasted as heat. This not only helps to reduce your electricity bills but also ensures that your components are being supplied with stable power, resulting...
Sien besonderhede