nuus
Hoe om die probleem van kragmodule seleksie op te los
Author： ZYG Power Module Time： 2022-12-20
It is not easy to select a power module. There are many difficulties to consider. How much do you know?
Magnetic beads, capacitors, diodes, resistors… all have similar inside stories, but people don’t pay much attention to them. There are various topologies of power modules, such as flyback, forward, push-pull, half-bridge, and full-bridge. Due to their different basic principles, each of them is mainly manifested in the advantages at the level of certain characteristic indicators.
The flyback power supply does not have a time period for charging and discharging the battery during the power switch period. That is because there is no time characteristic of the response characteristic, and the grain baud cannot be guaranteed to be very good, although it may not help much according to the energy storage capacitor , but the rationale is just a flaw.
Leakage inductance is also a big problem, but its advantages are simple power supply circuit, low cost, light weight, no need to add magnetic calibration windings, and a wider operating voltage range for typing. Because of this, its share of the total power supply sales market is about 7%.
The output voltage of the positive power supply has good transient operation characteristics and strong load capacity, but its disadvantages are also obvious. The large energy storage technology is used to filter the inductor and the freewheeling diode, which is large in size, and the back electromotive force of the primary coil of the transformer is high. .
The push-pull power supply has high transient response time, good working voltage and frequency characteristics. It is the most utilized power transformer of all topologies. No flux leakage, simple optocoupler circuit.
If the two forward converters are not completely symmetrical or balanced, the bias magnetism accumulated after many cycles will cause the magnetic core to enter a saturated state, resulting in excessive excitation current of the high-frequency transformer, and even damage the power switch tube.
The accumulative chainless power supply transformer has a large power and high working efficiency, the withstand voltage test value of the power switch tube is relatively low, and the primary coil of the transformer only needs to be wound once. The disadvantage is that the efficiency is low, there is a semiconductor area, and the consumption is large.
The above problems are all caused by the inherent advantages and disadvantages of its topology. Although people can use the power module as the black box of the aircraft, this is also a point that needs to be paid attention to when choosing a power supply.
vorige: Hoe om 'n kragmodule te kies en voorsorgmaatreëls, elkeen is baie belangrik
volgende: The Importance of Quality Control in China DC-DC Converter Manufacturing
relevante inligting
-
2023-5-7
Designing an Industrial AC-DC Converter
Introduction An AC-DC converter is an essential component in industrial power systems. It is used to convert the alternating current (AC) power from the grid into the direct current (DC) power that is required by various industrial devices. The design of an AC-DC converter is critical because it affects the efficiency, reliability, and performance of the entire power system. In this article, we will discuss the key factors to consider when designing an industrial AC-DC converter. Input Circuit The input circuit of an AC-DC converter is responsible for rectifying the AC power from the grid into DC power. The most common type of input circuit is the full-wave rectifier, which consists of four diodes arranged in a bridge configuration. When...
Sien besonderhede -
2023-7-23
Efficient AC to DC Converter for LED Lights: 12V Solution
Introduction LED lights have gained popularity in recent years due to their energy efficiency, long lifespan, and versatility in design. However, one of the challenges in using LED lights is converting the alternating current (AC) from the power grid into direct current (DC) required by the LED lights. In this article, we will explore an efficient AC to DC converter solution for LED lights, specifically focusing on a 12V system. Background LED lights operate on DC power, which is different from the AC power supply available in most households. Therefore, an AC to DC converter is needed to ensure the proper functioning of LED lights. The converter's primary function is to convert the AC voltage into a stable and regulated...
Sien besonderhede -
2023-10-16
Choosing the Best Modular PC Power Supply: A Complete Guide
Introduction When it comes to building a powerful and efficient PC, one component that often gets overlooked is the power supply. However, choosing the right power supply is crucial as it provides the necessary energy to run all the components of your computer. In this guide, we will discuss the importance of modular power supplies and provide you with a comprehensive understanding of how to choose the best one for your needs. What is a Modular Power Supply? A modular power supply is a type of power supply that allows you to connect and disconnect cables as needed. This means you only need to use the cables required for your specific setup, reducing clutter and improving airflow within your PC...
Sien besonderhede -
2023-6-4
SPM Series AC DC Converter: Efficient Power Conversion Solution for Diverse Applications
In today's modern world, power conversion solutions play a vital role in ensuring the efficient and reliable operation of various electronic devices and systems. With the increasing demand for energy-efficient solutions, the need for high-performance AC DC converters has become more important than ever before. The SPM series AC DC converter is a power conversion solution that offers exceptional performance, efficiency, and versatility. Developed by TDK-Lambda, a leading manufacturer of power supplies, the SPM series is designed to meet the demanding requirements of industrial, medical, and communications applications. One of the key features of the SPM series is its high efficiency. With its advanced topology and innovative design, the SPM series can achieve efficiency levels of up to 94%, making...
Sien besonderhede -
2023-8-29
AC/DC Power Supply Module: Delivering Reliable Electrical Power Solutions
Introduction A reliable source of electrical power is vital for the efficient operation of various devices and systems. One such solution that has gained significant popularity is the AC/DC power supply module. This article aims to shed light on the importance of these modules in delivering reliable electrical power solutions. Understanding AC/DC Power Supply Modules An AC/DC power supply module is a compact and versatile device that converts alternating current (AC) power into direct current (DC) power. It serves as an essential component in numerous applications, including telecommunications, industrial machinery, consumer electronics, and medical equipment. The module incorporates advanced technology and components to ensure a stable and efficient power supply. Reliability: The Key Factor In any electrical power supply system,...
Sien besonderhede -
2023-11-12
Exploring the Advantages of a Modular PC Power Supply
In the world of computer hardware, power supply units (PSUs) are an essential component that often goes overlooked. However, choosing the right PSU can have a significant impact on the performance and longevity of your computer. One option that has gained popularity in recent years is the modular power supply. In this article, we will explore the advantages of a modular PC power supply and why it might be the right choice for your next build. To understand the advantages of a modular power supply, it is important to first understand the difference between modular and non-modular PSUs. Traditional non-modular power supplies come with a fixed set of cables that are permanently attached to the unit. This means that all...
Sien besonderhede