PRODUKTE
EXXYYS(D)-2W

Die volgende reeks parameters is slegs vir verwysing. Gedetailleerde tegniese parameters is onderhewig aan tegniese spesifikasies.
Produk module | Krag (W) | Vin(VDC) | Vout (VDC) | No van uitset | Isolasie (VAC) | Pakket | Afmeting (mm) | Toetsverslag |
E2405S/D-2W | 2 | 21.6–26.4 | ±5 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E1505S/D-2W | 2 | 13.5–16.5 | ±5 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E1205S/D-2W | 2 | 10.8–13.2 | ±5 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E0505S/D-2W | 2 | 4,5–5,5 | ±5 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E2412S/D-2W | 2 | 21.6–26.4 | ±12 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E1512S/D-2W | 2 | 13.5–16.5 | ±12 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E1212S/D-2W | 2 | 10.8–13.2 | ±12 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E0512S/D-2W | 2 | 4,5–5,5 | ±12 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E2415S/D-2W | 2 | 21.6–26.4 | ±15 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E1515S/D-2W | 2 | 13.5–16.5 | ±15 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E1215S/D-2W | 2 | 10.8–13.2 | ±15 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E0515S/D-2W | 2 | 4,5–5,5 | ±15 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E2424S/D-2W | 2 | 21.6–26.4 | ±24 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E1524S/D-2W | 2 | 13.5–16.5 | ±24 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E1224S/D-2W | 2 | 10.8–13.2 | ±24 | 1 | 3000 | SIP | 19.6*10*0.9 | |
E0524S/D-2W | 2 | 4,5–5,5 | ±24 | 1 | 3 | SIP | 19.6*10*0.9 |
vorige: XXYY-reeks (1~2W)
volgende: FXXYYS(D)-2W
relevante inligting
-
2023-5-7
AC-DC Converter Module: Converting Alternating Current to Direct Current
Introduction An AC-DC converter module, also known as a rectifier, is an electronic device used to convert alternating current (AC) to direct current (DC). This module is used in a wide range of applications where DC power is required, such as in electronic devices, power supplies, and motor control systems. Working Principle The AC-DC converter module works by using a diode bridge circuit to convert the AC input voltage to a pulsating DC voltage. A diode is a semiconductor device that allows current to flow in only one direction. The diode bridge circuit consists of four diodes arranged in a bridge configuration, which allows the AC voltage to pass through the circuit and produce a pulsating DC voltage at the...
Sien besonderhede -
2023-6-14
Car AC-DC Converter: Power Your Devices on the Go!
In today's modern world, our reliance on electronic devices has increased significantly. Whether it is a smartphone, tablet, or laptop, we need to stay connected to these devices at all times. This becomes especially important when we are on the go, traveling in a car. However, in a vehicle, the power supply for these devices is limited. Fortunately, with the help of a car AC-DC converter, we can power our devices on the go. A car AC-DC converter is a device that helps to convert the DC power supply of a car into AC power, which can be used to charge our electronic devices. The converter plugs into the cigarette lighter or the power outlet of a car and provides...
Sien besonderhede -
2023-4-27
Title: Industrial AC-DC Converter for Efficient Power Conversion
Industrial AC-DC converters play an essential role in power electronics as they convert alternating current (AC) to direct current (DC). These converters are widely used in various applications such as power supplies for computers, telecommunication equipment, and other electronic devices. The development of industrial AC-DC converters aims to ensure efficient power conversion, reliability, and safety.One of the primary challenges in designing industrial AC-DC converters is to ensure high efficiency. Efficiency refers to the ratio between the output power and the input power. The efficiency of AC-DC converters is critical as it affects the power loss and heat generation within the system. High-efficiency converters can reduce energy consumption and operating costs.To improve efficiency, designers use advanced techniques such as soft switching,...
Sien besonderhede -
2023-5-24
Efficient 120V AC to 12V DC Converter for Reliable Power Supply
Introduction A reliable power supply is essential for any electronic system, and the use of a 120V AC to 12V DC converter is a common solution. This type of converter is used to convert the AC power from the mains into DC power that can be used by electronic devices. The efficiency of the converter is an important factor that determines its reliability. In this article, we will discuss an efficient 120V AC to 12V DC converter that can provide a reliable power supply for your electronic system. Efficiency of a Converter The efficiency of a converter is the ratio of the output power to the input power. It is important to have a high efficiency converter because it reduces...
Sien besonderhede -
2023-6-22
Exploring the Wonders of the Electric Power Series: A Journey into Modern Energy Technologies
Electricity is the backbone of modern society and the basis for almost all technological advancement. The electric power series, also known as the power system, is a network of interconnected power sources and electrical equipment that provides electricity to consumers. The power system is a complex network of power plants, transformers, transmission lines, and distribution networks that work together to deliver electricity to homes, businesses and industries. The power system has revolutionized the way we live, work and play, and continues to provide us with new and exciting technological advances. One of the wonders of the electric power series is the power plants that generate electricity. Power plants are facilities that produce electrical power by converting various forms of energy...
Sien besonderhede -
2023-4-14
AC-DC Converter: Changing Alternating Current to Direct Current
AC-DC converters are electronic devices that are used to change alternating current (AC) to direct current (DC). The process of converting AC to DC is important for many electrical devices that require a steady source of DC power. These devices are used in a wide range of applications such as power supplies, battery chargers, and LED lighting systems. The process of converting AC to DC involves several steps. The first step is the rectification of AC voltage. This can be achieved using a diode, which allows the positive half-cycle of the AC waveform to pass through, while blocking the negative half-cycle. The result is a pulsating DC voltage that is still not suitable for most applications. The second step is...
Sien besonderhede