nuus
Oor die belangrikheid, struktuur en hoe om die DC-DC-kragmodule te kies?
Author： ZYG Power Module Time： 2022-4-7
With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.
The importance of DC-DC power module:
DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.
For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.
Power structure of DC-DC power module:
The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.
The selection of power modules should be based on the following four points:
1, the use of mature power supply topology
The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.
2, high efficiency within the full load range
High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.
3, limit temperature characteristics
The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.
4, high isolation, low isolation capacitance
Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.
vorige: Hoe om kwaliteit klaring en betroubare kragmodulevervaardigers te kies?
volgende: Wat is die module kragmodus
relevante inligting
-
2023-6-3
Car AC-DC Converter: Powering Your Devices on the Go
Have you ever been on a long road trip and wished you could charge your phone or laptop without having to stop at a rest area or gas station? Or perhaps you\'ve been camping and needed to power your portable fridge or lights? A car AC-DC converter may be just what you need. What is a Car AC-DC Converter? A car AC-DC converter is a device that converts the DC power from your car's battery into AC power that can be used by electronic devices. It typically plugs into your car\'s cigarette lighter socket and has one or more AC outlets and USB ports to plug in your devices. Why Use a Car AC-DC Converter? There are several reasons why...
Sien besonderhede -
2023-5-22
Efficient AC-DC Converter for Your Car: Power Up Your Devices on the Go
An efficient AC-DC converter for your car is a must-have device for anyone who frequently travels by car and needs to power up their devices on the go. With the increasing use of smartphones, tablets, laptops, and other electronic devices, it has become essential to have a reliable and efficient power source in your car. An AC-DC converter is a device that converts the alternating current (AC) from your car's battery to direct current (DC) that can be used to power up your devices. It is a small, portable device that can be plugged into your car's cigarette lighter socket or any other 12V power socket. There are many benefits to using an efficient AC-DC converter in your car. Firstly,...
Sien besonderhede -
2023-6-30
Bidirectional DC-DC Converter: A Versatile Solution for Efficient Power Flow
Introduction: With the increasing demand for efficient power distribution and energy management in various applications such as renewable energy systems, electric vehicles, and microgrids, the bidirectional DC-DC converter has emerged as a versatile solution. This article aims to discuss the working principles, advantages, and applications of bidirectional DC-DC converters, highlighting their significance in achieving optimal power flow. 1. Working Principles: A bidirectional DC-DC converter is a power electronic device that enables the transfer of electrical energy between two DC voltage sources bidirectionally. It consists of two stages: step-up (boost) and step-down (buck) converters. The bidirectional flow of power is achieved by controlling the switching states of semiconductor devices, such as MOSFETs or IGBTs, in both stages. By regulating the voltage...
Sien besonderhede -
2023-5-25
High-Efficiency 12V AC-DC Converter for Reliable Power Supply
Introduction In recent years, the demand for energy-efficient and reliable power supply solutions has increased significantly. This has led to the development of various power conversion technologies. One such technology is the high-efficiency 12V AC-DC converter, which converts alternating current (AC) to direct current (DC) at a voltage of 12 volts. This article discusses the working principle, advantages, and applications of high-efficiency 12V AC-DC converters. Working Principle A high-efficiency 12V AC-DC converter consists of several components, including a rectifier, filter, and voltage regulator. The rectifier converts the AC input voltage to a pulsating DC voltage. The filter removes the ripple from the DC voltage, resulting in a smoother DC output voltage. The voltage regulator regulates the output voltage to a...
Sien besonderhede -
2023-9-12
Top-Notch 850W Modular Power Supply for Enhanced Performance
Introduction: In today's technologically advanced world, the demand for high-performance power supplies is increasing rapidly. One such power supply that has received rave reviews for its exceptional performance is the Top-Notch 850W Modular Power Supply. Designed to meet the power needs of modern-day computer systems, this power supply offers unparalleled efficiency, reliability, and modularity. In this article, we will delve into the key features and benefits of this remarkable power supply. Unmatched Performance: The Top-Notch 850W Modular Power Supply sets a new benchmark in terms of performance. With an impressive power output of 850 watts, it caters to the power requirements of even the most demanding computer systems. Whether you are a gamer, content creator, or professional, this power supply...
Sien besonderhede -
2023-12-11
Versatile Adjustable Power Supply Module: Harnessing Customizable Voltage for Diverse Applications
In today's fast-paced technological world, the demand for customizable and versatile power supply solutions is ever-increasing. From small electronic devices to large industrial machinery, having a power supply module that can adapt to different voltage requirements is essential. This is where the versatile adjustable power supply module comes into play, offering a range of voltage options to cater to diverse applications. The versatile adjustable power supply module is designed to provide a reliable and stable power source for various electronic devices. With its customizable voltage output, this module can be easily adjusted to meet the specific requirements of different applications. Whether it is a low voltage requirement for small electronic gadgets or a high voltage need for power-hungry devices, this...
Sien besonderhede